Simpson Strong-Tie

Simpson Strong-Tie P27SL4 Yellow Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350,...

Simpson Strong-Tie P27SL4 Yellow Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350, DX351, DX36, DX-A40, DX-A41 (except P27SL3), DX-450, DX-451, System 1H, P-368, A-40B, A-41B, Cobra, and most .27 caliber clone tools. P27SL Series SDS Sheet Please Note: Due to shipping restrictions on powder loads we can only ship theses loads by Ground Shipping to the 48 continental states....

The Simpson T15N200SFN 2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style...

The Simpson T15N200SFN 2" x 15ga. Angled Type 316 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1 Hitachi: NT64MA4...

The Simpson Strong-Tie Deck Drive™ DSVT212S #10 x 2-1/2" Tan Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and...

The Simpson Strong-Tie Deck Drive™ DSVT212S #10 x 2-1/2" Tan Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSVT212S is ideally suited to be driven using a PRO300S Quik Drive® Auto Feed Screw Gun. This screw is easily countersunk into today’s wood deck boards giving it a nice finished look. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth...

Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A...

Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single top plate to the rafter or truss. The Simpson H3 requires (8) 8d joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (8) 8d x 2-1/2" Nails H3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

The Simpson Strong-Tie TNT25234TF Titen Turbo™ 1/4" x 2-3/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...

The Simpson Strong-Tie TNT25234TF Titen Turbo™ 1/4" x 2-3/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...

Simpson Strong-Tie Mission Outdoor Accents® APB88R post bases secure a rough sawn 8 x 8 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other...

Simpson Strong-Tie Mission Outdoor Accents® APB88R post bases secure a rough sawn 8 x 8 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization for extra corrosion resistance. Base includes black powder coating for a decorative look. APB88 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture....

The Simpson Strong-Tie PAB5-18-HDG 5/8" x 18" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems...

The Simpson Strong-Tie PAB5-18-HDG 5/8" x 18" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department...

The Simpson Strong-Tie SUL210 Skewed Left 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate...

The Simpson Strong-Tie SUL210 Skewed Left 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 8-1/8" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (10) .162 x 3-1/2" 16d Nails (Face) (10) .148...

Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...

Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.37/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

The Simpson Strong-Drive® SDS25412 1/4" x 4-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25412 screw...

The Simpson Strong-Drive® SDS25412 1/4" x 4-1/2" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25412 screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 4-1/2" Thread Length: 2-3/4" Serrated Shank Diameter: 1/4" Point Type: Type 17 Point Drive...

Simpson Strong Tie HGUS412 4 x 12 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...

Simpson Strong Tie HGUS412 4 x 12 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 10-7/16" (Height) x 4" (Seat Depth) Fastener Options: (56) 16d Nails (Header) (20) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS412 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

Simpson Strong-Tie ITS2.06/16 sets a new standard for engineered wood top flange hangers. The ITS2.06/16 installs 2" or 2-1/16" x 16" I-Joists faster and uses less nails than any other EWP top...

Simpson Strong-Tie ITS2.06/16 sets a new standard for engineered wood top flange hangers. The ITS2.06/16 installs 2" or 2-1/16" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the...

Simpson Strong Tie HUCQ410SS-SDS Stainless Steel 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ410SS-SDS Stainless Steel...

Simpson Strong Tie HUCQ410SS-SDS Stainless Steel 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ410SS-SDS Stainless Steel hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Type 316L Stainless Steel Dimensions: 3-9/16" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6)...

The Simpson MIU2.56/11 hanger is designed to hang 2-1/2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/11 features...

The Simpson MIU2.56/11 hanger is designed to hang 2-1/2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie BA2.37/11.88 Top Flange Hanger is designed for 2-5/16" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid...

The Simpson Strong-Tie BA2.37/11.88 Top Flange Hanger is designed for 2-5/16" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...

The Simpson Strong-Tie RTRZ ZMax® Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure...

The Simpson Strong-Tie RTRZ ZMax® Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. The versatile RTRZ is ideal for a variety of projects including fences, railings and utility furniture. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included)...

The Simpson Strong-Tie SP6 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top...

The Simpson Strong-Tie SP6 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment Material: 20...

The Simpson Strong-Tie THD50300H6SS Type 316 Stainless Steel 1/2" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD50300H6SS Type 316 Stainless Steel 1/2" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

The Simpson Strong-Tie A44 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 4-9/16" Flange...

The Simpson Strong-Tie A44 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 4-9/16" Flange #2 (W2): 4-3/8" Fasteners: (8) 10d x 3" Nails or(8) SD9112 Screws A44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...

Simpson Strong Tie HUC28-2Z ZMax® Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use...

Simpson Strong Tie HUC28-2Z ZMax® Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-2Z ZMax® hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will...

The Simpson Strong-Tie MTS18 1-1/4" Wide x 18" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or...

The Simpson Strong-Tie MTS18 1-1/4" Wide x 18" Long Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS18 has a small bend section to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length)...

Simpson Strong-Tie AT-XP30 30oz. Fast-Curing Anchoring Adhesive for Cracked and Uncracked Concrete dispenses easily in cold or warm environments with little to no odor. When mixed properly through...

Simpson Strong-Tie AT-XP30 30oz. Fast-Curing Anchoring Adhesive for Cracked and Uncracked Concrete dispenses easily in cold or warm environments with little to no odor. When mixed properly through the included nozzle AT-XP30 is a teal color for easy post-installation identification when required. AT-XP30 anchoring adhesive has demonstrated superior performance in reduced-temperature testing (14°F) and is made in the USA. AT-XP adhesive has passed the demanding adverse condition tests of...

Simpson Strong Tie HUC28-2SS Stainless Steel Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed...

Simpson Strong Tie HUC28-2SS Stainless Steel Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-2SS Stainless Steel hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where...

The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange...

The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange #2 (W2): 5-7/8" Fasteners: (6) 10d x 3" Nails or (4) 3/8" Bolts A66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...