Simpson Strong-Tie

The Simpson Strong-Tie LMA4Z is a mudsill anchor that provides an economical replacement for 1/2" sill plate anchor bolts in a 2x4 or 3x4 mudsills. The unique design provides installation...

The Simpson Strong-Tie LMA4Z is a mudsill anchor that provides an economical replacement for 1/2" sill plate anchor bolts in a 2x4 or 3x4 mudsills. The unique design provides installation flexibility, eliminating problems associated with wall framing alignment interfering with foundation anchors. The LMA4Z has a ZMax® coating, a thicker galvanized finish that helps extend the service life of the connector. Suitable for stem wall or slab foundations One-piece design, so there are no nuts...

Simpson Strong-Tie CB66PC Powder Coat column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. This...

Simpson Strong-Tie CB66PC Powder Coat column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB base is installed during the pouring of the concrete. This column base features a black powder-coat finish for a more decorative look. Strap Material: 7 Ga. x 3" Wide Black Powder Coat Steel Base Material: 7 Ga Powder Coat (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66PC Information and Installation Instructions Simpson Strong-Tie Powder Coating...

The Simpson Strong-Tie SP4Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the...

The Simpson Strong-Tie SP4Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Load rated...

The Simpson Strong-Tie RTR Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid...

The Simpson Strong-Tie RTR Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance. The versatile RTR is ideal for a variety of projects including fences, railings and utility furniture. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from...

The Simpson Strong-Tie A33 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 3" Flange #2...

The Simpson Strong-Tie A33 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 3" Flange #2 (W2): 3" Fasteners: (8) 10d x 3" Nails or(8) SD9112 Screws A33 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...

Simpson Strong-Tie Mission Outdoor Accents® APB88 post bases secure a 8 x 8 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported...

Simpson Strong-Tie Mission Outdoor Accents® APB88 post bases secure a 8 x 8 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization for extra corrosion resistance. Base includes black powder coating for a decorative look. APB88 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet...

Simpson Strong Tie HUCQ410Z-SDSG ZMax® 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ410Z-SDSG ZMax® hangers with...

Simpson Strong Tie HUCQ410Z-SDSG ZMax® 3-9/16" Wide 4 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ410Z-SDSG ZMax® hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-9/16" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...

Simpson Strong-Tie CNW1-7/8 coupling nuts are a tested and load rated method to join 1" threaded rod or anchor bolts to 7/8" rod extensions. The "witness" holes in the nut provide a means to...

Simpson Strong-Tie CNW1-7/8 coupling nuts are a tested and load rated method to join 1" threaded rod or anchor bolts to 7/8" rod extensions. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW1-7/8 meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. CNW1-7/8 Information and Data Standard G90 Zinc Galvanized Coating Information Standard...

The Simpson Strong-Tie THD37500CS 3/8" x 5" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of...

The Simpson Strong-Tie THD37500CS 3/8" x 5" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking also...

Simpson Strong-Tie MSTA24Z ZMax® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of...

Simpson Strong-Tie MSTA24Z ZMax® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: ZMax® G185 Galvanized Dimensions: 1-1/4" (Wide) x 24" (Length) Fasteners: (18) 10d Nails (18) SD9 x...

Simpson Strong Tie HGUS410 4 x 10 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...

Simpson Strong Tie HGUS410 4 x 10 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 9-1/16" (Height) x 4" (Seat Depth) Fastener Options: (46) 16d Nails (Header) (16) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS410 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

Simpson Strong Tie U210-3 Triple 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....

Simpson Strong Tie U210-3 Triple 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 7-3/4" (Height) x 2" (Seat Depth) Fastener Options: (14) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 3" 10d Nails (Joist) U210-3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...

Simpson Strong Tie LUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...

Simpson Strong Tie LUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28 2 x 8 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 6-5/8" (Height) x 1-3/4" (Seat Depth)...

Simpson Strong Tie HUC28-2 Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...

Simpson Strong Tie HUC28-2 Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-2 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work. Material:...

Simpson Strong-Tie CC66 Column Caps provide a high capacity connection between a 6x wide beam and a 6x post. CC66 Column Caps should be used when the 6x beam extends through the 6x post. Please...

Simpson Strong-Tie CC66 Column Caps provide a high capacity connection between a 6x wide beam and a 6x post. CC66 Column Caps should be used when the 6x beam extends through the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/2" (Beam) x 5-1/2" (Post) x 11" (Length)...

Simpson Strong-Tie ECCO8 End Column Caps with no straps provides a high capacity connection between a 8x wide beam and a steel post. The ECCO8 End Column Caps comes with no coating to allow you to...

Simpson Strong-Tie ECCO8 End Column Caps with no straps provides a high capacity connection between a 8x wide beam and a steel post. The ECCO8 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 7-1/2" (Beam) x 10-1/2"...

The Simpson Strong-Tie LTP4Z ZMax® Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and...

The Simpson Strong-Tie LTP4Z ZMax® Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. Material: 20 Gauge Finish: ZMax® Length: 4-1/4" Width: 3" Fasteners: (12) 8d x 1-1/2" (12) SD #9 x 1-1/2" LTP4 Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker...

The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single...

The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single top plate to the rafter or truss. The Simpson H3 requires (8) 8d joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (8) 8d x 2-1/2" Nails H3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90...

Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 9" (L) Bolt Holes:...

Simpson Strong-Tie P27SL3A Green Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350,...

Simpson Strong-Tie P27SL3A Green Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350, DX351, DX36, DX-A40, DX-A41 (except P27SL3), DX-450, DX-451, System 1H, P-368, A-40B, A-41B, Cobra, and most .27 caliber clone tools. P27SL Series SDS Sheet Please Note: Due to shipping restrictions on powder loads we can only ship theses loads by Ground Shipping to the 48 continental states....

The Simpson Strong-Tie SSTB24 (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...

The Simpson Strong-Tie SSTB24 (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 25-5/8" Minimum Embedment: 20-5/8" Finish: None Rolled threads for higher...

Simpson Strong-Tie CS14 14-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS14 are approved for use with SD Screws as a nail...

Simpson Strong-Tie CS14 14-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS14 are approved for use with SD Screws as a nail substitution. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 100' (Length) Fasteners: 8d or 10d depending on end length and material (See information link below) CS14 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...

The THD37600H 3/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...

The THD37600H 3/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...

The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the...

The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties are designed to be used in both in vertical and...