Plastic Cone Snap Ties

OCM, Inc #STSEC-6HH 6" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-6HH 6" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties use...

OCM, Inc #STSEC-8HH 8" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-8HH 8" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties use...

Dayton Superior 15423 A3 8" Wall x 1-3/16" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Dayton Superior A4H Hex Head Snap Ties are manufactured with hot-forged...

Dayton Superior A3 15407 8" Wall x 1-5/8" Round End Plastic Cone Snap Ties can be used with either the #5 forming system with 1-1/8" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snap Tie Wedge. Dayton Superior Snap Ties standard snap tie uses 1" x 1" A-2 Plastic Cones to provide a nominal 1" break-back. Dayton Superior A4H Hex Head Snap Ties are manufactured with hot-forged...

OCM, Inc #STSEC-10HH 10" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-10HH 10" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STSEC-12HH 12" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-12HH 12" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STSEC-14HH 14" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-14HH 14" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STLEC-16HH 16" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STSEC-18HH 18" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-18HH 18" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STLEC-20HH 20" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STSEC-24HH 24" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-24HH 24" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STLEC-30HH 30" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...

OCM, Inc #STSEC-36HH 36" Wall x 4-3/4" End Hex Head Plastic Cone Snap Ties can be used with either the #1 or #2 forming systems with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge or Jahn Bracket. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The...

OCM, Inc #STLEC-36HH 36" Wall x 8-1/4" End Hex Head Plastic Cone Snap Ties can be used with the #3 forming system with 3/4" plywood. This snap tie forming method is used for retaining and standard walls, batter walls, bridges, concrete signs, footings, etc. They are held in place by a Snaptie Wedge. OCM, Inc Hex Head Snap Ties are manufactured with integral heads. The hex head allows short-end snap ties to be broken back with the form work still in place. The standard OCM hex head snap ties...