Bolts, Nuts & Washers

1/2" - 13 Zinc Plated Hex Nuts for either 1/2" machine bolts or all thread rod. Uses 3/4" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or...

1/2" - 13 Zinc Plated Hex Nuts for either 1/2" machine bolts or all thread rod. Uses 3/4" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...

BP12-2HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot...

BP12-2HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot dipped galvanized to protect the washer from corrosion when exposed to the elements as well as coming in contact with ACQ lumber. Hole Size: 9/16" Dimension: 2" x 2" Thickness: 3/16" Coating: Hot Dipped Galvanized Mild Steel Imported Picture may not match product exactly Hot Dipped Galvanized...

1/2" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from...

1/2" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washer are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: None Explanation of "Stock" Availability Term Stock items...

These 1/2" x 12" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...

These 1/2" x 12" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....

1/2" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and...

1/2" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 1/2" Inside Diameter: 9/16" Outside Diameter: 1-3/8" Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...

5/8" x 1-7/8" (H) Witness Hole Coupling Nuts are used to connected two 5/8" threaded rods together or extend a 5/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the...

5/8" x 1-7/8" (H) Witness Hole Coupling Nuts are used to connected two 5/8" threaded rods together or extend a 5/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the rods are connected properly. Zinc Plated Hex Head Imported Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used...

1/2" Hot Dipped Galvanized Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads...

1/2" Hot Dipped Galvanized Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washers are hot dipped galvanized providing corrosion protection when required. Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: Hot Dipped Galvanized Hot Dipped Galvanized Coating Information Hot-Dip...

1/2" USS Hot Dipped Galvanized Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Hot Dipped Galvanizing provides corrosion...

1/2" USS Hot Dipped Galvanized Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Hot Dipped Galvanizing provides corrosion resistance to allow you to these washers with ACQ lumber. Bolt Size: 1/2" Inside Diameter: 9/16" Outside Diameter: 1-3/8" Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average...

BP12-3 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and...

BP12-3 Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates have no corrosion resistance and should not be used with ACQ lumber. Hole Size: 9/16" Dimension: 3" x 3" Thickness: 1/4" Coating: None Mild Steel Imported Picture may not match product exactly Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our...

These 1/2" x 24" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...

These 1/2" x 24" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....

These 1/2" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...

These 1/2" x 3" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...

These 1/2" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May...

These 1/2" x 5" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 3/4" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...