Fasteners

The Simpson Strong-Tie® Titen Turbo™ installation kit makes installation of these concrete and masonry screw anchors quick and easy. Accessories are compatible with standard quick-release...

The Simpson Strong-Tie® Titen Turbo™ installation kit makes installation of these concrete and masonry screw anchors quick and easy. Accessories are compatible with standard quick-release or three-jaw style chucks. The sockets have been designed to prevent over-torquing, which can lead to fastener failure. The kit comes with a convenient zipper-close canvas bag for easy storage of installation-kit parts and Titen Turbo screw anchors. 6-Piece Kit Includes: 6-lobe bit socket T25 and...

1/2" - 13 Zinc Plated Hex Nuts for either 1/2" machine bolts or all thread rod. Uses 3/4" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or...

1/2" - 13 Zinc Plated Hex Nuts for either 1/2" machine bolts or all thread rod. Uses 3/4" socket to install. Important: These zinc plated hex nuts will NOT work with Hot Dipped Galvanized bolts or threaded rod. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of Corrosion...

BP12-2HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot...

BP12-2HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot dipped galvanized to protect the washer from corrosion when exposed to the elements as well as coming in contact with ACQ lumber. Hole Size: 9/16" Dimension: 2" x 2" Thickness: 3/16" Coating: Hot Dipped Galvanized Mild Steel Imported Picture may not match product exactly Hot Dipped Galvanized...

1/2" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from...

1/2" Plain Malleable Cast Iron Round Washers are used in various types of wood construction. Malleable Iron Washers have a large bearing surface designed to prevent 1/2" bolt heads and nuts from pulling into the wood. These washer are not coated with any corrosion resistance material and will quickly rust if exposed to the elements. Bolt Hole Size: 9/16" Approximate Outside Diameter: 2-1/2" Approximate Washer Thickness: 1/4" Coating: None Explanation of "Stock" Availability Term Stock items...

These 1/2" x 12" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...

These 1/2" x 12" zinc plated all thread rods when used with a 1/2" coupling nut can be used for extending machine bolts or any other 1/2" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....

1/2" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and...

1/2" USS Zinc Plated Flat Washers are used to prevent the bolt head and/or hex nut from embedding into the wood surface during tightening. Zinc Plating provides minimum corrosion resistance and should not be used with ACQ lumber. Bolt Size: 1/2" Inside Diameter: 9/16" Outside Diameter: 1-3/8" Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...

5/8" x 1-7/8" (H) Witness Hole Coupling Nuts are used to connected two 5/8" threaded rods together or extend a 5/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the...

5/8" x 1-7/8" (H) Witness Hole Coupling Nuts are used to connected two 5/8" threaded rods together or extend a 5/8" SSTB or standard anchor bolt. The witness hole allows the inspector to confirm the rods are connected properly. Zinc Plated Hex Head Imported Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used...

Fastap Exterior Screws...The Best Coated Exterior Screw You Can Buy! Period! Fast Plus™ DAC250W 500-Pack 2-1/2" x #9 Phillips Drive exterior grade carpentry screws with DuracoatXT™ and...

Fastap Exterior Screws...The Best Coated Exterior Screw You Can Buy! Period! Fast Plus™ DAC250W 500-Pack 2-1/2" x #9 Phillips Drive exterior grade carpentry screws with DuracoatXT™ and Power Point v3™ give you building and remodeling capabilities that nails and conventional screws can't offer. Fastap Screws were developed specifically for any outdoor project where rust and corrosion needs to be prevented. More cost effective than stainless steel (and with greater shear load...

No Predrilling. Stronger than 3/8" Lags! The FMTLOK04 4" FastenMaster® TimberLok® Heavy Duty Wood Screw can replace 3/8" lag screws and enables you to complete wood-to-wood projects faster,...

No Predrilling. Stronger than 3/8" Lags! The FMTLOK04 4" FastenMaster® TimberLok® Heavy Duty Wood Screw can replace 3/8" lag screws and enables you to complete wood-to-wood projects faster, easier and stronger. All design values based on 1-1/2" side member thickness and penetration into main member as follows; TimberLok 2", Nails 10x diameter, Lags 8x diameter. Design values may be subject to adjustment factors (section 10.3 in NDS) based on conditions existing during installation as...

The Grip Rite LP212STBBK Brown 2-1/2" x #9 PrimeGuard Plus Deck Screws are the ideal screw for many decking projects. The 6-point (T25) Star Drive provides additional torque during installation as...

The Grip Rite LP212STBBK Brown 2-1/2" x #9 PrimeGuard Plus Deck Screws are the ideal screw for many decking projects. The 6-point (T25) Star Drive provides additional torque during installation as well as less chance of stripping. Exterior grade proprietary PrimeGuard Plus® coating with a lifetime guarantee against rust and corrosion when used with treated lumber Type 17 point reduces need to pre-drill and prevents wood-splitting Ideal for all exterior material applications Tapered,...

The Grip-Rite GRR11 A11-3/8" Heavy Duty Hammer Tacker is an easy-to-use hammer tacker suitable for stapling fitted carpets, insulation materials, labels, etc. The GRR11 is all steel construction and...

The Grip-Rite GRR11 A11-3/8" Heavy Duty Hammer Tacker is an easy-to-use hammer tacker suitable for stapling fitted carpets, insulation materials, labels, etc. The GRR11 is all steel construction and a quick jam clearing feature that makes it very reliable and durable. For A11 Flat Wire Staples Only four parts - simple and durable Ergonomically designed rubber grip Four-way grip Common Applications Insulation, carpeting, roofing, felt paper, poly sheeting, vapor barrier and more. Features All...

GRK's 1-1/2" x #8 Trim Head Finish screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more.  The small head shape easily countersinks...

GRK's 1-1/2" x #8 Trim Head Finish screws are an excellent choice for most fine carpentry applications, as well as window extension jambs and more.  The small head shape easily countersinks leaving a small hole to fill.  The small head and W-Cut™ thread design limits splitting problems in your finished product. Recessed Star Drive: Zero Stripping, with 6 points of contactTrim head: for a clean finished lookW-Cut™: Low torque, smoother driveZip-Tip™: No pre-drilling,...