Simpson Strong-Tie FWANZ Foundation Wall Connector
Price: $4.66
Availability: Stock
Simpson Strong-Tie Item #: FWANZ -

    Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to the mudsill with nails, relying on other anchorage (by designer) to anchor the sill plate to the foundation. Compatible with solid sawn joists, I-joists and floor trusses Testing performed on most common rim materials and types Addresses design needs set forth in Section 1610.1 in the 2015 / 2018 /...

    Simpson Strong-Tie GBC Gable Brace Connector
    Price: $6.88
    Availability: Stock
    Simpson Strong-Tie Item #: GBC -

      Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities. GBC clips must be installed in pairs to reach full load capacity. Material: 16 Gauge Finish: Standard G90 Zinc Installation Angles: 40° to 60° Fasteners-Gable Brace: (5) 8d x 1-1/2" Nails Fasteners-Top Plates: (7) 8d Nails GBC Information and Installation Instructions. Standard G90 Zinc...

      Simpson Strong-Tie RBC Roof Connector
      Price: $1.69
      Availability: Stock
      Simpson Strong-Tie Item #: RBC -

        The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard G90 Zinc Fasteners-to-blocking: (6)...

        Simpson Strong-Tie RBC Roof Connector
        Price: $5,091.43
        Availability: Stock
        Simpson Strong-Tie Item #: RBC-36 -

          Save by Purchasing 36 Box Special! The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard...

          Simpson TJC37 Jack Truss Connector
          Price: $3.67
          Availability: Stock
          Simpson Strong-Tie Item #: TJC37 -

            The Simpson Strong-Tie TJC37 is a versatile connector for jack trusses. Adjustable from 0° to 85°, you can bend the TJC to the desired position (one bend cycle only). Each TJC is shipped with 67.5° bend. Nail hole locations allow for easy installation. No bevel cut is required. Minimum nailing option on TJC37 provides faster installation and lower installed cost. Material: 16 Gauge Finish: Standard G90 Zinc Width: 3-1/8" x 3-1/2" x 3-1/2" Fasteners (Minimum): (4) .131 x 1-1/2"...

            Simpson TJC57 Jack Truss Connector
            Price: $5.27
            Availability: Stock
            Simpson Strong-Tie Item #: TJC57 -

              The Simpson Strong-Tie TJC57 is a versatile connector for jack trusses. Adjustable from 0° to 85°, you can bend the TJC to the desired position (one bend cycle only). Each TJC is shipped with 67.5° bend. Nail hole locations allow for easy installation. No bevel cut is required. SD screws can be used to increase standard load values. Material: 16 Gauge Finish: Standard G90 Zinc Width: 5-1/8" x 3-1/2" x 3-1/2" Fasteners (Nails): (12) .131 x 1-1/2" Nails (Carrying Member) (12) .131 x...

              Simpson Strong-Tie CHC Component Hoist Clip
              Price: $4.53
              Availability: Stock
              Simpson Strong-Tie Item #: CHC -

                The Simpson Strong-Tie CHC Component Hoist Clip provides a tested, load-rated solution for the safe lifting and placement of assembled wood components. The CHC is load rated with Strong-Drive® SDS Heavy-Duty Connector screws for easy installation and removal, and superior shear and withdrawal strength during lifting. Material: 12 Gauge Finish: Standard G90 Zinc Fastener Options: (2) SDS25300 Screws (Top) (3) SDS25300 Screws (Face) CHC Information and Installation Instructions. Standard G90...

                Simpson Strong-Tie Miscellaneous Clips and Ties