Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie A21 Framing Clips for various wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 1-3/8" Flange #1 (W1): 2" Flange #2 (W2):...
The Simpson Strong-Tie A21 Framing Clips for various wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 1-3/8" Flange #1 (W1): 2" Flange #2 (W2): 1-1/2" Fasteners: (4) 10d x 1-1/2" Nails or(4) SD9112 Screws A21 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...
The Simpson Strong-Tie A34 Framing Clips for wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x...
The Simpson Strong-Tie A34 Framing Clips for wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
The Simpson Strong-Tie DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are...
The Simpson Strong-Tie DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2L-SDS3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to...
Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to the mudsill with nails, relying on other anchorage (by designer) to anchor the sill plate to the foundation. Compatible with solid sawn joists, I-joists and floor trusses Testing performed on most common rim materials and types Addresses design needs set forth in Section 1610.1 in the 2015 / 2018 /...
The Simpson Strong-Tie FWH2 is a four-way connector designed for 2x members. This heavy connector features bendable flanges to easily secure the members in place at the desired angle. Manufactured...
The Simpson Strong-Tie FWH2 is a four-way connector designed for 2x members. This heavy connector features bendable flanges to easily secure the members in place at the desired angle. Manufactured to high-quality standards to ensure solid performance, the FWH features a galvanized finish for added corrosion resistance. Great utility connector for a variety of applications Bendable flanges to connect 2x wood members Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included)...
The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x...
The Simpson Strong-Tie H1A Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Holds the rafter or truss on both sides for high lateral load resistance Can be installed on inside or outside of wall, or...
The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Each Bracket Includes: (4) 1/4" x...
The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Each Bracket Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws Material: 14 Gauge Finish: Standard G90 Zinc Fastener Included: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
The Simpson Strong-Tie L30 Reinforcing Angle are a 3" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The...
The Simpson Strong-Tie L30 Reinforcing Angle are a 3" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L30 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanized Length: 3" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (4) 10d x 1-1/2" Nails or (4) SD #10 x 1-1/2" Screws L30 Information and...
The Simpson Strong-Tie LS30 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time....
The Simpson Strong-Tie LS30 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Galvanizing Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" Nails LS30 Information and Installation Instructions Standard...
The Simpson Strong-Tie LSCZ ZMax® adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing...
The Simpson Strong-Tie LSCZ ZMax® adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSCZ connector is suitable for either solid or notched stringers. Replaces additional framing and toe-nailing. May be installed flush with the top of the carrying member (typically suitable for 2x10 or 2x12 header / rim board) or...
The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...
The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (4) SDS25112 Screws Dimensions: 3" Length x 2" (Flange Widths) ML23Z Information and...