Additional Clips and Angles

Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to...

Simpson Strong-Tie FWANZ foundation anchor connects the foundation or basement wall to the floor system to resist out-of-plane forces imposed by soil pressure. The foundation wall angle fastens to the mudsill with nails, relying on other anchorage (by designer) to anchor the sill plate to the foundation. Compatible with solid sawn joists, I-joists and floor trusses Testing performed on most common rim materials and types Addresses design needs set forth in Section 1610.1 in the 2015 / 2018 /...

The Simpson Strong-Tie FWH2 is a four-way connector designed for 2x members. This heavy connector features bendable flanges to easily secure the members in place at the desired angle. Manufactured...

The Simpson Strong-Tie FWH2 is a four-way connector designed for 2x members. This heavy connector features bendable flanges to easily secure the members in place at the desired angle. Manufactured to high-quality standards to ensure solid performance, the FWH features a galvanized finish for added corrosion resistance. Great utility connector for a variety of applications Bendable flanges to connect 2x wood members Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included)...

The Simpson Strong-Tie LSCZ ZMax® adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing...

The Simpson Strong-Tie LSCZ ZMax® adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSCZ connector is suitable for either solid or notched stringers. Replaces additional framing and toe-nailing. May be installed flush with the top of the carrying member (typically suitable for 2x10 or 2x12 header / rim board) or...

Simpson Strong-Tie TSP Stud Plate for connecting the top plate to either the wall stud or 2x rafter. The TSP Tie uses (9) 10d .131" x 1-1/2" to the stud or rafter and (6) 10d x 1-1/2" or 3" to the...

Simpson Strong-Tie TSP Stud Plate for connecting the top plate to either the wall stud or 2x rafter. The TSP Tie uses (9) 10d .131" x 1-1/2" to the stud or rafter and (6) 10d x 1-1/2" or 3" to the top plate depending on the load value required. Material: 16 Gauge Finish: Standard G90 Zinc Fastener Options: (9) 10d x 1-1/2" Nails (Stud or Rafter) (6) 10d x 1-1/2" or 3" (Top Plate) TSP Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...

Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities....

Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities. GBC clips must be installed in pairs to reach full load capacity. Material: 16 Gauge Finish: Standard G90 Zinc Installation Angles: 40° to 60° Fasteners-Gable Brace: (5) 8d x 1-1/2" Nails Fasteners-Top Plates: (7) 8d Nails GBC Information and Installation Instructions. Standard G90 Zinc...

The Simpson Strong-Tie LSCSS Stainless Steel adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while...

The Simpson Strong-Tie LSCSS Stainless Steel adjustable stair-stringer connector offers a versatile, concealed connection between the stair stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair stringer pitches, the LSCZ connector is suitable for either solid or notched stringers. Replaces additional framing and toe-nailing. May be installed flush with the top of the carrying member (typically suitable for 2x10 or 2x12 header / rim...

The Simpson Strong-Tie RTA12 Rigid Tie® is designed to connect two 1x2 or larger post and joist at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for...

The Simpson Strong-Tie RTA12 Rigid Tie® is designed to connect two 1x2 or larger post and joist at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #8 x 3/4" Screws (not included) Provides a...

The Simpson Strong-Tie SSP Single Stud Plate Tie is a prebent strap designed to connect single studs to either top or bottom plates. This versatile single-stud-plate connector helps to create a...

The Simpson Strong-Tie SSP Single Stud Plate Tie is a prebent strap designed to connect single studs to either top or bottom plates. This versatile single-stud-plate connector helps to create a continuous load path in uplift resistance. The SSP features a top flange that allows the plate to attach securely to both sill plates and top plates. Embossments feature provides strength at the bend Can be installed before or after placement of wall Material: 18 Gauge Finish: Standard G90 Zinc Fastener...

The Simpson Strong-Tie RTA12Z ZMax® Rigid Tie® is designed to connect two 1x2 or larger post and joist at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the...

The Simpson Strong-Tie RTA12Z ZMax® Rigid Tie® is designed to connect two 1x2 or larger post and joist at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #8 x 3/4" Screws (not...

The Simpson Strong-Tie SSPZ ZMax® Single Stud Plate Tie is a prebent strap designed to connect single studs to either top or bottom plates. This versatile single-stud-plate connector helps to...

The Simpson Strong-Tie SSPZ ZMax® Single Stud Plate Tie is a prebent strap designed to connect single studs to either top or bottom plates. This versatile single-stud-plate connector helps to create a continuous load path in uplift resistance. The SSP features a top flange that allows the plate to attach securely to both sill plates and top plates. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Embossments feature provides strength at the...

The Simpson Strong-Tie DSP Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a...

The Simpson Strong-Tie DSP Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a continuous load path in uplift resistance. The DSP features a top flange that allows the plate to attach securely to both sill plates and top plates. Embossments feature provides strength at the bend Can be installed before or after placement of wall Material: 18 Gauge Finish: Standard G90 Zinc Fastener...

The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy....

The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard G90 Zinc Fasteners-to-blocking: (6)...

The Simpson Strong-Tie RTA2Z ZMax® Rigid Tie® is designed to connect two 2x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for...

The Simpson Strong-Tie RTA2Z ZMax® Rigid Tie® is designed to connect two 2x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #9 x 1-1/2" SD Screws (not...

Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily...

Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x...

The Simpson Strong-Tie DSPZ ZMax® Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to...

The Simpson Strong-Tie DSPZ ZMax® Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a continuous load path in uplift resistance. The DSP features a top flange that allows the plate to attach securely to both sill plates and top plates. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Embossments feature provides strength at the...

Save by Purchasing 36 Box Special! The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make...

Save by Purchasing 36 Box Special! The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard...