HL Series Heavy Angles

Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

Simpson Strong-Tie HL33HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33HDG Heavy Angle Information...

Simpson Strong-Tie HL33PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 7 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33PC...

Simpson Strong-Tie HL35 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset as a special order.  Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt...

Simpson Strong-Tie HL35HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt Holes: (4) 1/2" HL35HDG Heavy Angle Information and...

Simpson Strong-Tie HL35PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Please Note: This angle is available with a gusset as a special order.  Please call our sales department direct at 800-323-2999 for pricing and lead...

Simpson Strong-Tie HL37 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL37 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available as Hot Dipped Galvanized and Powder Coating as a special order.  Additionally, the standard angle and powder coated angles can be special ordered with gussets.  Please call our sales department direct at...

Simpson Strong-Tie HL43 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a Hot Dipped Galvanized as a special order.  Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 3" (L) Bend...

Simpson Strong-Tie HL43PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 3 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 3" (L) Bend to Hole Center: 2-3/4" Bolt...

Simpson Strong-Tie HL46 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a gusset or black powder coating as a special order.  Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Paint Dimensions: 4-1/4" (W1) x 4-1/4"...

Simpson Strong-Tie HL46HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 3 gauge Finish: Hot Dipped Galvanized Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 6" (L) Bolt Holes: (4) 3/4" HL46HDG Heavy Angle Information and...

Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 9" (L) Bolt Holes:...

Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

Simpson Strong-Tie HL53HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53HDG Heavy Angle Information...

Simpson Strong-Tie HL53PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 7 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53PC...

Simpson Strong-Tie HL55 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 5" (L) Bolt Holes: (8) 1/2" HL55 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

Simpson Strong-Tie HL55HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 5" (L) Bolt Holes: (8) 1/2" HL55HDG Heavy Angle Information and...

Simpson Strong-Tie HL55PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 7 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 5" (L) Bolt Holes: (8) 1/2" HL55PC Heavy...

Simpson Strong-Tie HL57 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL57 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset, hot dipped galvanized or powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x...

Simpson Strong-Tie HL73 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL73 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with hot dipped galvanized or black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 7-1/4" (W1) x 7-1/4" (W2) x...

Simpson Strong-Tie HL76 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL76 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset, hot dipped galvanized or powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 7-1/4" (W1) x 7-1/4" (W2)...