Forming Hardware

OCM ACLMP Jahn-A Bracket is fabricated from high strength steel with a cad plated eccentric and painted body. The 5/8" take-up of the eccentric compensates for minor lumber variations in thickness. This Jahn-A Bracket can be utilized to hold a single horizontal wale or a single vertical stud with any type of wall form; round, curved, battered, beam and/or columns. The Jahn-A Bracket can be installed before or after the wales have been positioned. The slots in the bracket allow it to slip over...

OCM STWEGP Snap-Tie Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. The OCM STWEGP Snap-Tie Wedges is a high strength snap tie wedge with a safe working load of 3,325 lbs. It is designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby...

OCM STWEGP Snap-Tie Wedges (also known as hairpin wedges) can either be used in a double waler forming system or applies directly to the plywood when using stubby snap ties. The OCM STWEGP Snap-Tie Wedges is a high strength snap tie wedge with a safe working load of 3,325 lbs. It is designed to slip over the head of standard or heavy duty snap ties to provide ample bearing area for proper load distribution into the wales. The wedge can also be applies directly to the plywood when using stubby...

OCM TBFB-BF Turnbuckle Form Aligner with Bent Plate are designed to accurately position and plumb vertical forms and framed walls. The turnbuckle section of the aligner features a 1" diameter self-cleaning coil thread for fast adjustments. Overall length of the aligner is 35" minimum and 39" maximum, offering 4" of effective adjustment. The OCM TBFB-BF Turnbuckle Form Aligner has a bent nailing plate equipped with nail holes for nailing to forms and a 15/16" hole to accept 3/4" or 7/8" round...

This Punched Hole Metal Strapping is a 3/4" wide x .017 Gauge x 300' Length roll that is pre-punched to be used for tying the corners of forms quickly and securely. It is packaged in a portable box, quickly secures form corners, and is easy and quick to install and remove using duplex nails. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock...