Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie ABU44Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44Z...
The Simpson Strong-Tie ABU44Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44Z features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 16 Gauge Strap Material: 12 Gauge Dimensions: (W)...
The Simpson Strong-Tie ABW44Z for 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete...
The Simpson Strong-Tie ABW44Z for 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW44Z allows...
The Simpson Strong-Tie AC4 Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 6-1/2" (L) Fastener...
The Simpson Strong-Tie AC4 Split Post Caps allow you to install the cap after the 4 x 4 post and 4x beam are set. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 6-1/2" (L) Fastener Options: Beam...(8) .162 x 3-1/2" Nails (Min) Beam...(14) .162 x 3-1/2" Nails (Max) Post...(8) .162 x 3-1/2" Nails (Min) Post...(14) .162 x 3-1/2" Nails (Max) Post and Beam...(28) SD10 x 1-1/2" (Max) AC4 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson BC4 Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 3-9/16" (L)...
The Simpson BC4 Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (W) x 3-9/16" (L) Fastener Options: (12) 16d or (12) SD10 x 1-1/2" BC4 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
The Simpson Strong-Tie BC40 Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H)...
The Simpson Strong-Tie BC40 Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H) 2-1/4" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This...
The Simpson Strong-Tie CBT2Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether...
The Simpson Strong-Tie CBT2Z Concealed Beam Tie combines structural strength with invisibility for applications that call for concealed joinery rather than standard beam-to-post connections. Whether you’re designing for a custom indoor or outdoor living space, the tubular shape of the CBTZ allows an easy-to-install beam-to-post connection using common tools. The CBT2Z is designed to connect beams and posts of a variety of sizes. The CBT2Z accommodates a minimum 4x4 post and 4x6 beam using four...
The CPT44Z concealed 4 x 4 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and...
The CPT44Z concealed 4 x 4 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 2-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT44Z is tested and load-rated for uplift,...
Simpson Strong-Tie ECC44 End Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. ECC44 End Column Caps should be used when the 4x beam ends at the 4x post. Please...
Simpson Strong-Tie ECC44 End Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. ECC44 End Column Caps should be used when the 4x beam ends at the 4x post. Please Note: This column cap is also available in powder coat and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 5-1/2" (Length) Fasteners: (1)...
Simpson Strong-Tie ECCLLQ444 End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2"...
Simpson Strong-Tie ECCLLQ444 End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Please Note: This column cap may be available in Hot Dipped Galvanized as a special order. Additionally, multiple configurations can be manufactured up to 8x sizes. Please call our sales department...
Simpson Strong-Tie ECCO3 1/4 End Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The ECCO3 End Column Caps comes with no coating to...
Simpson Strong-Tie ECCO3 1/4 End Column Caps with no post straps provides a high capacity connection between a 3-1/8" wide beam and a steel post. The ECCO3 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-1/8"...
Simpson Strong-Tie ECCQ3-4SDS2.5 End Column Caps provide a high capacity connection between a 3-1/8" beam and a 4x post. ECCQ3-4SDS2.5 End Column Caps should be used when the beam ends at the post....
Simpson Strong-Tie ECCQ3-4SDS2.5 End Column Caps provide a high capacity connection between a 3-1/8" beam and a 4x post. ECCQ3-4SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ3-4SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...
The Simpson Strong-Tie EPC4Z post cap is designed with the post and beam flanges in-line so that the EPC4Z end post cap can accommodate several 4x post sizes as well as double 2x4 studs. The EPC4Z...
The Simpson Strong-Tie EPC4Z post cap is designed with the post and beam flanges in-line so that the EPC4Z end post cap can accommodate several 4x post sizes as well as double 2x4 studs. The EPC4Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough...