Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie ECCLLQ444SDS End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x...
Simpson Strong-Tie ECCLLQ444SDS End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444SDS Information and Installation Instructions....
The Simpson Strong-Tie ABU88Z ZMax® is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88 features 1" standoff height...
The Simpson Strong-Tie ABU88Z ZMax® is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88 features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 14 Gauge Strap Material: 12 Gauge Dimensions: (W) 7-1/2" x (L) 7" x (H) 7"...
The Simpson Strong-Tie BC6R Rough Post Caps allow you to create a light duty connection between a 6 x 6 rough post and 6x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 6" (W) x 6"...
The Simpson Strong-Tie BC6R Rough Post Caps allow you to create a light duty connection between a 6 x 6 rough post and 6x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 6" (W) x 6" (L) Fastener Options: (24) 16d BC6R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance...
Simpson Strong-Tie CC5 1/4-6 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 6x post. CC5 1/4-6 Column Caps should be used when the 5-1/8" beam extends through the...
Simpson Strong-Tie CC5 1/4-6 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 6x post. CC5 1/4-6 Column Caps should be used when the 5-1/8" beam extends through the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 5-1/2"...
Simpson Strong-Tie ECCLLQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson...
Simpson Strong-Tie ECCLLQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444HDG Information and...
Simpson Strong-Tie ECCO7 End Column Caps with no straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The ECCO7 End Column Caps comes with no coating to allow you...
Simpson Strong-Tie ECCO7 End Column Caps with no straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The ECCO7 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 6-7/8" (Beam) x...
Simpson Strong-Tie ECCQ46-SDS2.5HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x beam and a 6x post. ECCQ46-SDS2.5 End Column Caps should be used when the...
Simpson Strong-Tie ECCQ46-SDS2.5HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x beam and a 6x post. ECCQ46-SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ46SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-5/8" (Beam) x 5-1/2" (Post) x 8-1/2" (Length)...
The Simpson Strong-Tie ABU88HDG Hot Dipped Galvanized is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88HDG features 1"...
The Simpson Strong-Tie ABU88HDG Hot Dipped Galvanized is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88HDG features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. The Hot Dipped Galvanized feature provides an extra layer of protection from...
Simpson Strong-Tie CCO7 End Column Caps with no post straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The CCO7 Column Caps comes with no coating to allow you...
Simpson Strong-Tie CCO7 End Column Caps with no post straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The CCO7 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 6-7/8" (Beam) x 13"...
Simpson Strong-Tie CCQ46-SDS2.5HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x beam and a 6x post. CCQ46SDS2.5 Column Caps should be used when the beam extends...
Simpson Strong-Tie CCQ46-SDS2.5HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x beam and a 6x post. CCQ46SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ46SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department...
Simpson Strong-Tie ECC5 1/4-8 End Column Caps provide a high capacity connection between a 5-1/8" Glulam beam and a 8x post. ECC5 1/4-8 End Column Caps should be used when the 5-1/8" beam ends at...
Simpson Strong-Tie ECC5 1/4-8 End Column Caps provide a high capacity connection between a 5-1/8" Glulam beam and a 8x post. ECC5 1/4-8 End Column Caps should be used when the 5-1/8" beam ends at the 6x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 7-1/2" (Post) x 9-1/2" (Length)...
Simpson Strong-Tie LCE4's universal design provides high capacity while eliminating the need for rights and lefts. For use with 4x or 6x lumber. LCE4's can be used as an end post cap application or...
Simpson Strong-Tie LCE4's universal design provides high capacity while eliminating the need for rights and lefts. For use with 4x or 6x lumber. LCE4's can be used as an end post cap application or an outside corner installation. Sold By The Each Material: 20 Gauge Finish: Standard G90 Galvanized Fastener Options: (24) 16d (24) SD10 x 1-1/2" LCE4 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...
The Simpson Strong-Tie ABU88RZ is an adjustable post base for rough size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88RZ features 1" standoff height above...
The Simpson Strong-Tie ABU88RZ is an adjustable post base for rough size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88RZ features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 14 Gauge Strap Material: 12 Gauge Dimensions: (W) 8" x (L) 7" x (H) 7" Finish: ZMax...
The Simpson BC6Z ZMax® Post Caps allow you to create a light duty connection between a 6 x 6 nominal post and 6x nominal beam. ZMax® coating provide corrosion resistance when caps are...
The Simpson BC6Z ZMax® Post Caps allow you to create a light duty connection between a 6 x 6 nominal post and 6x nominal beam. ZMax® coating provide corrosion resistance when caps are installed in exposed locations. Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 5-1/2" (W) x 5-1/2" (L) Fastener Options: (24) 16d BC6Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a...
Simpson Strong-Tie CC5 1/4-8 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 8x post. CC5 1/4-8 Column Caps should be used when the 5-1/8" beam extends through the...
Simpson Strong-Tie CC5 1/4-8 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 8x post. CC5 1/4-8 Column Caps should be used when the 5-1/8" beam extends through the 8x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 7-1/2" (Post) x 13" (Length)...
Simpson Strong-Tie ECCLLQ464SDS End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x...
Simpson Strong-Tie ECCLLQ464SDS End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 5-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ464SDS Information and Installation Instructions....