Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie PC6Z Center Post Cap is designed with the post and beam flanges in-line so that the PC6Z center post cap can accommodate (3) 6x post sizes. The PC6Z now uses easier-to-install...
The Simpson Strong-Tie PC6Z Center Post Cap is designed with the post and beam flanges in-line so that the PC6Z center post cap can accommodate (3) 6x post sizes. The PC6Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough dimensional size as a...
The Simpson Strong-Tie ABU46RZ with ZMax® Corrosion Resistance is an adjustable post base for rough size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46RZ...
The Simpson Strong-Tie ABU46RZ with ZMax® Corrosion Resistance is an adjustable post base for rough size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46RZ features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 12 Gauge Strap Material: 12 Gauge Dimensions: (W)...
The Simpson Strong-Tie ABW66Z for 6x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete...
The Simpson Strong-Tie ABW66Z for 6x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW66Z allows...
The Simpson Strong-Tie BC460 Half Base is an economical way to attach a nominal 4 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 3-3/8" x (H) 3"...
The Simpson Strong-Tie BC460 Half Base is an economical way to attach a nominal 4 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 3-3/8" x (H) 3" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails BC460 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...
The Simpson BC4 ZMax® Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. ZMax® coating provide corrosion resistance when caps are...
The Simpson BC4 ZMax® Post Caps allow you to create a light duty connection between a 4 x 4 nominal post and 4x nominal beam. ZMax® coating provide corrosion resistance when caps are installed in exposed locations. Material: 18 Gauge Finish: ZMax® G-185 Coating Dimensions 3-9/16" (W) x 3-9/16" (L) Fastener Options: (12) 16d or (12) SD10 x 1-1/2" BC4Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating...
Simpson Strong-Tie ECC46 End Column Caps provide a high capacity connection between a 4x wide beam and a 6x post. ECC46 End Column Caps should be used when the 4x beam ends at the 6x post. Please...
Simpson Strong-Tie ECC46 End Column Caps provide a high capacity connection between a 4x wide beam and a 6x post. ECC46 End Column Caps should be used when the 4x beam ends at the 6x post. Please Note: This column cap is also available in powder coat as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 5-1/2" (Post) x 8-1/2" (Length) Fasteners: (2) 5/8" Machine Bolts (Beam) , (2)...
Simpson Strong-Tie ECCLR444 End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint...
Simpson Strong-Tie ECCLR444 End Corner Column Caps provide a right connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Fasteners: (4) 5/8" x 4-1/2" Machine Bolts (Beam & Post) ECCLR444 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect the product while it is being...
Simpson Strong-Tie ECCO4/6 End Column Caps with no straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4/6 End Column Caps comes with no coating to allow you...
Simpson Strong-Tie ECCO4/6 End Column Caps with no straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4/6 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x...
Simpson Strong-Tie ECCQ44SDS2.5 End Column Caps provide a high capacity connection between a 4x beam and a 4x post. ECCQ44SDS2.5 End Column Caps should be used when the beam ends at the post. Each...
Simpson Strong-Tie ECCQ44SDS2.5 End Column Caps provide a high capacity connection between a 4x beam and a 4x post. ECCQ44SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ44SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department direct at...
The Simpson Strong-Tie EPC8Z post cap is designed with the post and beam flanges in-line so that the EPC8Z end post cap can accommodate (3) 8x post sizes. The EPC8Z now uses easier-to-install 10d...
The Simpson Strong-Tie EPC8Z post cap is designed with the post and beam flanges in-line so that the EPC8Z end post cap can accommodate (3) 8x post sizes. The EPC8Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough dimensional size as a manufactured...
The Simpson Strong-Tie ABU46SS with Type 316L Stainless Steel Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware...
The Simpson Strong-Tie ABU46SS with Type 316L Stainless Steel Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46SS features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 12 Gauge Strap Material: 12 Gauge...
The Simpson Strong-Tie ABW66RZ for rough 6x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above...
The Simpson Strong-Tie ABW66RZ for rough 6x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW66RZ...
The Simpson AC6 Split Post Caps allow you to install the cap after the 6x post and 6x beam are set. Material: 18 Gauge Finish: Standard G90 Galvanized Dimensions 5-1/2" (W) x 8-1/2" (L) Fastener...
The Simpson AC6 Split Post Caps allow you to install the cap after the 6x post and 6x beam are set. Material: 18 Gauge Finish: Standard G90 Galvanized Dimensions 5-1/2" (W) x 8-1/2" (L) Fastener Options: Beam...(8) .162 x 3-1/2" Nails (Min) Beam...(14) .162 x 3-1/2" Nails (Max) Post...(8) .162 x 3-1/2" Nails (Min) Post...(14) .162 x 3-1/2" Nails (Max) Post and Beam...(28) SD10 x 1-1/2" (Max) AC6 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie BC60 Half Base is an economical way to attach a nominal 6 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 5-1/2" x (H) 3"...
The Simpson Strong-Tie BC60 Half Base is an economical way to attach a nominal 6 x 6 post to a wood subfloor or bottom plate. Base Material: 18 Gauge Dimensions: (W) 5-1/2" x (L) 5-1/2" x (H) 3" Finish: Standard G90 Zinc Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC60 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating...
Simpson Strong-Tie CCO4/6 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The CCO4/6 Column Caps comes with no coating to allow you...
Simpson Strong-Tie CCO4/6 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The CCO4/6 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x 11"...
Simpson Strong-Tie CCQ44SDS2.5 Column Caps provide a high capacity connection between a 4x beam and a 4x post. CCQ44SDS2.5 Column Caps should be used when the beam extends through the post. Each...
Simpson Strong-Tie CCQ44SDS2.5 Column Caps provide a high capacity connection between a 4x beam and a 4x post. CCQ44SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ44SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department direct at 800-323-2999 for...