Simpson Strong-Tie

The Simpson Strong-Tie BA2.37/14 Top Flange Hanger is designed for 2-5/16" x 14" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...

The Simpson Strong-Tie BA2.37/14 Top Flange Hanger is designed for 2-5/16" x 14" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...

The Simpson MIU2.56/14 hanger is designed to hang 2-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/14 features positive-angle...

The Simpson MIU2.56/14 hanger is designed to hang 2-1/2" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.56/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

Simpson Strong Tie HUC28-2SS Stainless Steel Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed...

Simpson Strong Tie HUC28-2SS Stainless Steel Double 2 x 8 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC28-2SS Stainless Steel hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.37/9.5 Information and Installation...

Simpson Strong Tie U214 2 x 14 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material:...

Simpson Strong Tie U214 2 x 14 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 10" (Height) x 2" (Seat Depth) Fastener Options: (12) .162" x 3-1/2" 16d Nails (Header) (8) .148" x 1-1/2" 10d Nails (Joist) U214 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

The Simpson Strong-Tie BCS2-2/4 allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post...

The Simpson Strong-Tie BCS2-2/4 allows for the connection of (2) 2x's to a 4x post. Double-shear nailing between beam and post gives added strength. The BC/BCS series offers dual-purpose post cap/base for light cap or base connections. Install dome nails on beam; drive nails at an angle through the beam into the post below to achieve the table loads Material: 18 Gauge Finish: Standard G90 Dimensions 3-9/16" (Post Width) x 3-1/8" (Joists Width) Fastener Options: (14) 10d Common BCS2-2/4...

The Simpson Strong-Tie TNT18314H Titen Turbo™ 3/16" x 3-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...

The Simpson Strong-Tie TNT18314H Titen Turbo™ 3/16" x 3-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...

The Simpson Strong-Tie HU44TF is a hybrid 4 x 4 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that...

The Simpson Strong-Tie HU44TF is a hybrid 4 x 4 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 3-7/16" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (8)...

The Simpson Strong-Tie SP6Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the...

The Simpson Strong-Tie SP6Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Load rated...

Simpson Strong-Tie CS16SS-R Stainless Steel 16-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS16SS-R are approved for use with...

Simpson Strong-Tie CS16SS-R Stainless Steel 16-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS16SS-R are approved for use with SD Screws as a nail substitution. 25' packs are an economical choice when you do not require large amounts. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 25' (Length) Fasteners: 8d or 10d depending on end length and material (See link below for more information)...

The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange...

The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange #2 (W2): 5-7/8" Fasteners: (6) 10d x 3" Nails or (4) 3/8" Bolts A66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...

The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of...

The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard...

The Simpson Strong-Tie PAB5-24 5/8" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB5-24 5/8" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong-Tie Mission Outdoor Accents® APB88DSP decorative side plates attach to the bottom of a 8 x 8 post or column installed with the APB88 or APB88R post base. These plates provide a...

Simpson Strong-Tie Mission Outdoor Accents® APB88DSP decorative side plates attach to the bottom of a 8 x 8 post or column installed with the APB88 or APB88R post base. These plates provide a finished look to an installed post base. These decorative side plates provide a black powder coat finish over ZMax® galvanization for extra corrosion resistance. Install these side plates with Outdoor Accents® SDWS22312DBB structural wood screws and STN22 hex-head washers (sold separately) for...

Simpson Strong-Tie MSTA30Z ZMax® 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of...

Simpson Strong-Tie MSTA30Z ZMax® 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 16 gauge Finish: ZMax® G185 Galvanized Dimensions: 1-1/4" (Wide) x 30" (Length) Fasteners: (22) 10d Nails (22) SD9 x...

Simpson Strong Tie HGUS414 4 x 14 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...

Simpson Strong Tie HGUS414 4 x 14 Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 12-7/16" (Height) x 4" (Seat Depth) Fastener Options: (66) 16d Nails (Header) (22) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS414 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...

Simpson Strong Tie HUCQ412-SDS 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ412-SDS hangers with concealed flanges are...

Simpson Strong Tie HUCQ412-SDS 3-9/16" Wide 4 x 12 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ412-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (14) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws (Joist)...

Simpson Strong-Tie CC68 Column Caps provide a high capacity connection between a 6x wide beam and a 8x post. CC68 Column Caps should be used when the 6x beam extends through the 8x post. Please...

Simpson Strong-Tie CC68 Column Caps provide a high capacity connection between a 6x wide beam and a 8x post. CC68 Column Caps should be used when the 6x beam extends through the 8x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/2" (Beam) x 7-1/2" (Post) x 11" (Length) Fasteners: (4) 5/8"...

Simpson Strong-Tie ECCO9 End Column Caps with no straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The ECCO9 End Column Caps comes with no coating to allow you...

Simpson Strong-Tie ECCO9 End Column Caps with no straps provides a high capacity connection between a 8-3/4" wide beam and a steel post. The ECCO9 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 8-7/8" (Beam) x...

Simpson Strong Tie LUS28Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS28Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28Z 2 x 8 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 6-5/8" (Height) x 1-3/4"...

Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson...

Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 1" Pre-deflected...

Simpson Strong-Tie P27SL5A Red Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350,...

Simpson Strong-Tie P27SL5A Red Powder Strip Loads fit many of following tools: Simpson: PTP-27, PTP-27AL, PTP-27ALMAGR, PTP-27AS, PTP-27AS, PTP-27ASMAGR, PTM-27, PTM-27HD, PT-27 Others: DX-350, DX351, DX36, DX-A40, DX-A41 (except P27SL3), DX-450, DX-451, System 1H, P-368, A-40B, A-41B, Cobra, and most .27 caliber clone tools. P27SL Series SDS Sheet Please Note: Due to shipping restrictions on powder loads we can only ship theses loads by Ground Shipping to the 48 continental states....

Simpson Strong-Tie CB68 column bases are used to provide a connection of a 6 x 8 (5-1/2" x 7-1/2") post to concrete. The CB68 base is installed during the pouring of the concrete. Strap Material: 7...

Simpson Strong-Tie CB68 column bases are used to provide a connection of a 6 x 8 (5-1/2" x 7-1/2") post to concrete. The CB68 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 7-1/2") Fasteners: (2) 5/8" Machine Bolts CB68 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...

Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...