Login/Register
Shopping Cart
OR
The THD501200H 1/2" x 12" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THD501200H 1/2" x 12" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
Simpson Strong-Tie IUS3.56/11.88 is used to install 3-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging...
Simpson Strong-Tie IUS3.56/11.88 is used to install 3-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face) IUS3.56/11.88 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie CC96 Column Caps provide a high capacity connection between a 8-3/4" GluLam beam and a 6x post. CC96 Column Caps should be used when the 8-3/4" beam extends through the 6x post....
Simpson Strong-Tie CC96 Column Caps provide a high capacity connection between a 8-3/4" GluLam beam and a 6x post. CC96 Column Caps should be used when the 8-3/4" beam extends through the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 8-7/8" (Beam) x 5-1/2" (Post) x 13"...
Simpson Strong-Tie ECC98 End Column Caps provide a high capacity connection between a 8-3/4" Glulam beam and a 8x post. ECC98 End Column Caps should be used when the 8-3/4" beam ends at the 8x post....
Simpson Strong-Tie ECC98 End Column Caps provide a high capacity connection between a 8-3/4" Glulam beam and a 8x post. ECC98 End Column Caps should be used when the 8-3/4" beam ends at the 8x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 8-7/8" (Beam) x 7-1/2" (Post) x...
Simpson Strong-Tie IUS3.56/14 is used to install 3-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS3.56/14 is used to install 3-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...
Simpson Strong-Tie ITS2.56/16 sets a new standard for engineered wood top flange hangers. The ITS2.56/16 installs 2-1/2" or 2-9/16" x 16" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.56/16 sets a new standard for engineered wood top flange hangers. The ITS2.56/16 installs 2-1/2" or 2-9/16" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...
The Simpson Strong-Tie SSTB36 (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...
The Simpson Strong-Tie SSTB36 (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 36-7/8" Minimum Embedment: 28-7/8" Finish: None Rolled threads for higher...
Simpson Strong-Tie CB1212 column bases are used to provide a connection of a 12 x 12 (11-1/2" x 11-1/2") post to concrete. The CB1212 base is installed during the pouring of the concrete. Strap...
Simpson Strong-Tie CB1212 column bases are used to provide a connection of a 12 x 12 (11-1/2" x 11-1/2") post to concrete. The CB1212 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (11-1/2" x 11-1/2") Fasteners: (2) 3/4" Machine Bolts CB1212 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only...
Simpson Strong-Tie H10S Hurricane Tie for connecting the stud to both the top plates and 2x rafter. The connection to the stud may be center or offset (load value reduces when offset). The H10S Tie...
Simpson Strong-Tie H10S Hurricane Tie for connecting the stud to both the top plates and 2x rafter. The connection to the stud may be center or offset (load value reduces when offset). The H10S Tie uses (24) 8d .131" x 1-1/2" or longer joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fastener Options: (24) 8d x 1-1/2" Nails H10S Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per...
Simpson Strong Tie HGUS7.25/12 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material:...
Simpson Strong Tie HGUS7.25/12 7-1/4" Wide Double Shear Beam Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 7-1/4" (Wide) x 10-5/8" (Height) x 4" (Seat Depth) Fastener Options: (56) 16d Nails (Header) (20) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS7.25/12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie ECCQ68SDS2.5 End Column Caps provide a high capacity connection between a 6x Beam and a 8x post. ECCQ68SDS2.5 End Column Caps should be used when the beam ends at the post. Each...
Simpson Strong-Tie ECCQ68SDS2.5 End Column Caps provide a high capacity connection between a 6x Beam and a 8x post. ECCQ68SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ68SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...
The Simpson Strong-Tie PAB7-12 7/8" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB7-12 7/8" x 12" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
The Simpson Strong-Tie 3-1/2" x 18" MIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 18" MIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie THDB62500H4SS Type 304 Stainless Steel 5/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDB62500H4SS Type 304 Stainless Steel 5/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The THD501200HMG Mechanical Galvanized 1/2" x 12" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...
The THD501200HMG Mechanical Galvanized 1/2" x 12" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...
The Simpson MIU4.28/9 hanger is designed to hang 4-1/8" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/9 features...
The Simpson MIU4.28/9 hanger is designed to hang 4-1/8" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/9 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU4.28/11 hanger is designed to hang 4-1/8" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/11 features...
The Simpson MIU4.28/11 hanger is designed to hang 4-1/8" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.28/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie THDB62500H6SS Type 316 Stainless Steel 5/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THDB62500H6SS Type 316 Stainless Steel 5/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie 3-1/2" x 18" HIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is...
The Simpson Strong-Tie 3-1/2" x 18" HIT418 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. The HIT also features extra triangle holes to allow higher uplift loads. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong Tie U66 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U66 6 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 5" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U66 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc...
The Simpson Strong-Tie SUL1.81/9 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 9-1/4" or 9-1/2" engineered wood joists. The angles nail slots direct nails for proper installation....
The Simpson Strong-Tie SUL1.81/9 Skewed 45° Left Hanger can be used when hanging a 1-3/4" x 9-1/4" or 9-1/2" engineered wood joists. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 1-3/4" x 9-1/4" or 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 9" (Height) x 1-5/8" (Outside Flange) x 2-5/16" (Inside...
Simpson Strong Tie LUS210-3 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS210-3 2 x 10/12 Triple Double-Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-3 Triple 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 8-3/16"...
The Simpson Strong-Tie PAB7-18 7/8" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB7-18 7/8" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
The Simpson Strong-Tie SSTB36HDG Hot Dipped Galvanized (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...
The Simpson Strong-Tie SSTB36HDG Hot Dipped Galvanized (7/8" Diameter by 36-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 36-7/8" Minimum Embedment: 28-7/8" Finish: Hot...