Login/Register
Shopping Cart
OR
Simpson Strong Tie U46R Rough 4 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U46R Rough 4 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 4-1/16" (Wide) x 4-5/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U46R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie TNT25600H Titen Turbo™ 1/4" x 6" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the...
The Simpson Strong-Tie TNT25600H Titen Turbo™ 1/4" x 6" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and snapping....
The Simpson Strong-Tie HU412TF is a hybrid 4 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU412TF is a hybrid 4 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16) .162...
Simpson Strong Tie HU210-3 Triple 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU210-3 Triple 2 x 10 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU210-3 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 4-11/16" (Wide) x 8-1/16" (Height) x 2-1/2" (Seat Depth)...
The Simpson Strong-Tie HSUR210-2 Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally...
The Simpson Strong-Tie HSUR210-2 Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist end may be square or beveled cut. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-1/4" (Outside Flange) x 2-3/16" (Inside Flange) Fastener Options : (20) .162 x 3-1/2" 16d Nails...
The Simpson MIU4.12/9 hanger is designed to hang 4" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.12/9 features positive-angle...
The Simpson MIU4.12/9 hanger is designed to hang 4" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.12/9 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU4.12/11 hanger is designed to hang 4" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.12/11 features positive-angle...
The Simpson MIU4.12/11 hanger is designed to hang 4" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU4.12/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong-Tie CS22-R 22-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS22-R are approved for use with SD Screws as a nail...
Simpson Strong-Tie CS22-R 22-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS22-R are approved for use with SD Screws as a nail substitution. 25' packs are an economical choice when you do not require large amounts. Material: 22 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 25' (Length) Fasteners: 8d or 10d depending on end length and material (See information link below) CS22-R Information and...
Simpson Strong Tie HUC210-3 Triple 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HUC210-3 Triple 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC210-3 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will not work....
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange...
The Simpson Strong-Tie HUC412TF is a hybrid 4 x 12 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with...
The Simpson Strong-Tie HUC412TF is a hybrid 4 x 12 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16)...
Simpson Strong Tie U410 4 x 10/12 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material:...
Simpson Strong Tie U410 4 x 10/12 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 8-3/8" (Height) x 2" (Seat Depth) Fastener Options: (14) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 3" 10d Nails (Joist) U410 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
Simpson Strong-Tie CB1010HDG Hot Dipped Galvanized column bases are used to provide a connection of a 10 x 10 (9-1/2" x 9-1/2") post to concrete. The CB1010 base is installed during the pouring of...
Simpson Strong-Tie CB1010HDG Hot Dipped Galvanized column bases are used to provide a connection of a 10 x 10 (9-1/2" x 9-1/2") post to concrete. The CB1010 base is installed during the pouring of the concrete. The Hot Dipped Galvanizing provides additional corrosion protection when required. Strap Material: 3 Ga. x 3" Wide Hot Dipped Galvanized Steel Base Material: 3 Ga Hot Dipped Galvanized (9-1/2" x 9-1/2") Fasteners: (2) 3/4" Machine Bolts CB1010 Information and Installation Instructions...
The THD50800HMG Mechanical Galvanized 1/2" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...
The THD50800HMG Mechanical Galvanized 1/2" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...
The Simpson Strong-Tie PAB6-30 3/4" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB6-30 3/4" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
The Simpson Strong-Tie 3-1/2" x 11-7/8" MIT411.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed,...
The Simpson Strong-Tie 3-1/2" x 11-7/8" MIT411.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
Simpson Strong-Tie H10AZ with ZMax® Corrosion Protection Hurricane Tie for connection a double top plate to a 2x rafter or truss. The H10AZ can also be field-bent to connect to shear blocking as...
Simpson Strong-Tie H10AZ with ZMax® Corrosion Protection Hurricane Tie for connection a double top plate to a 2x rafter or truss. The H10AZ can also be field-bent to connect to shear blocking as well. The H10AZ uses (18) 10d .148" x 1-1/2" joist nails. Material: 18 Gauge Finish: ZMax® G-185 Coating Fastener Options: (18) 10d .148" x 1-1/2" H10A Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM...
Simpson Strong-Tie CCQ66SDS2.5 Column Caps provide a high capacity connection between a 6x beam and a 6x post. CCQ66SDS2.5 Column Caps should be used when the beam extends through the post. Each...
Simpson Strong-Tie CCQ66SDS2.5 Column Caps provide a high capacity connection between a 6x beam and a 6x post. CCQ66SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ66SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department direct at 800-323-2999 for...
Simpson Strong Tie LUS210-2 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie LUS210-2 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-2 Double 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 9" (Height) x 2"...
Simpson Strong Tie LUS210-2Z ZMax® 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater...
Simpson Strong Tie LUS210-2Z ZMax® 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210-2Z Double 2 x 10/12 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/8" (Wide) x 9"...
Simpson Strong-Tie ECC96 End Column Caps provide a high capacity connection between a 8-3/4" Glulam beam and a 6x post. ECC96 End Column Caps should be used when the 8-3/4" beam ends at the 6x post....
Simpson Strong-Tie ECC96 End Column Caps provide a high capacity connection between a 8-3/4" Glulam beam and a 6x post. ECC96 End Column Caps should be used when the 8-3/4" beam ends at the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 8-7/8" (Beam) x 5-1/2" (Post) x...
Simpson Strong-Tie ITS2.56/14 sets a new standard for engineered wood top flange hangers. The ITS2.56/14 installs 2-1/2" or 2-9/16" x 14" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS2.56/14 sets a new standard for engineered wood top flange hangers. The ITS2.56/14 installs 2-1/2" or 2-9/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...
Simpson Strong-Tie IUS3.56/9.5 is used to install 3-1/2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS3.56/9.5 is used to install 3-1/2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS3.56/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie SSTB34 (7/8" Diameter by 34-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...
The Simpson Strong-Tie SSTB34 (7/8" Diameter by 34-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 34-7/8" Minimum Embedment: 28-7/8" Finish: None Rolled threads for higher...