Simpson Strong-Tie

Simpson Strong Tie HUC210-2SS Stainless Steel Double 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed...

Simpson Strong Tie HUC210-2SS Stainless Steel Double 2 x 10 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC210-2SS Stainless Steel hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where...

The Simpson Strong-Tie TNT25500H Titen Turbo™ 1/4" x 5" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the...

The Simpson Strong-Tie TNT25500H Titen Turbo™ 1/4" x 5" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and snapping....

Simpson Strong Tie U46 4 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...

Simpson Strong Tie U46 4 x 6/8 Standard Face Mount Beam Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 4-7/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 3" 10d Nails (Joist) U46 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...

Save by Purchasing a Quantity of 200 SSTB28L Bolts! The Simpson Strong-Tie SSTB28L (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall...

Save by Purchasing a Quantity of 200 SSTB28L Bolts! The Simpson Strong-Tie SSTB28L (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 32-7/8" Minimum...

The Simpson Strong-Tie MTS24C 16ga. x 24" Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a...

The Simpson Strong-Tie MTS24C 16ga. x 24" Medium Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS24C has a small bend section at the middle of the strap to reduce interference at the transition points between the two members. MTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4"...

The THD50612HMG Mechanical Galvanized 1/2" x 6-1/2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...

The THD50612HMG Mechanical Galvanized 1/2" x 6-1/2" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...

The Simpson Strong-Tie SUR210-2Z ZMax® Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will...

The Simpson Strong-Tie SUR210-2Z ZMax® Skewed Right Double 2 x 10/12 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 10/12 joist ends may be square or beveled cut. Material: 16 gauge Finish: ZMax® G185 Galvanized Dimensions: 3-1/8" (Wide) x 8-11/16" (Height) x 1-7/16" (Outside Flange) x 2-3/8" (Inside Flange) Fastener Options : (14) .162 x 3-1/2"...

Simpson Strong Tie HUCQ612Z-SDSG ZMax® 5-1/2" Wide 6 x 12 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ612Z-SDSG ZMax® hangers with...

Simpson Strong Tie HUCQ612Z-SDSG ZMax® 5-1/2" Wide 6 x 12 Heavy Duty Beam Hangers come with the required SDS screws to reach the load values you require. HUCQ612Z-SDSG ZMax® hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 5-1/2" (Wide) x 11" (Height) x 3" (Seat Depth) Included Fasteners: (14) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...

Simpson Strong-Tie Avant Outdoor Accents® APVB1010DSP decorative side plates attach to the bottom of a 10 x 10 post or column installed with the APB1010 or APB1010R post base. These plates...

Simpson Strong-Tie Avant Outdoor Accents® APVB1010DSP decorative side plates attach to the bottom of a 10 x 10 post or column installed with the APB1010 or APB1010R post base. These plates provide a finished look to an installed post base. These decorative side plates provide a black powder coat finish over ZMax® galvanization for extra corrosion resistance. Install these side plates with Outdoor Accents® SDWS22312DBB structural wood screws and STN22 hex-head washers (sold...

The Simpson Strong-Tie PAB6-24 3/4" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB6-24 3/4" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong-Tie IUS2.56/14 is used to install 2-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...

Simpson Strong-Tie IUS2.56/14 is used to install 2-1/2" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...

Simpson Strong Tie LUS210Z ZMax® 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength....

Simpson Strong Tie LUS210Z ZMax® 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210Z 2 x 10/12 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 7-13/16" (Height)...

Simpson Strong-Tie IUS2.56/16 is used to install 2-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...

Simpson Strong-Tie IUS2.56/16 is used to install 2-1/2" x 16" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 16" (Height) x 2" (Seat Depth) Fastener Options : (14) .148 x 3" Nails (Face-Min) (16) .148 x 3" Nails (Face-Max)...

Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x 11-7/8" I-Joists faster and uses less nails than any other...

Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2"...

Simpson Strong-Tie CB1010 column bases are used to provide a connection of a 10 x 10 (9-1/2" x 9-1/2") post to concrete. The CB1010 base is installed during the pouring of the concrete. Strap...

Simpson Strong-Tie CB1010 column bases are used to provide a connection of a 10 x 10 (9-1/2" x 9-1/2") post to concrete. The CB1010 base is installed during the pouring of the concrete. Strap Material: 3 Ga. x 3" Wide Painted Simpson Gray Steel Base Material: 3 Ga Painted Simpson Gray (9-1/2" x 9-1/2") Fasteners: (2) 3/4" Machine Bolts CB1010 Information and Installation Instructions Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect...

The THD50800H 1/2" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...

The THD50800H 1/2" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...

Simpson Strong-Tie ECCQ66SDS2.5 End Column Caps provide a high capacity connection between a 6x Beam and a 6x post. ECCQ66SDS2.5 End Column Caps should be used when the beam ends at the post. Each...

Simpson Strong-Tie ECCQ66SDS2.5 End Column Caps provide a high capacity connection between a 6x Beam and a 6x post. ECCQ66SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ66SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department direct at...

Simpson Strong-Tie H10A Hurricane Tie for connection a double top plate to a 2x rafter or truss. The H10A can also be field-bent to connect to shear blocking as well. The H10A uses (18) 10d .148" x...

Simpson Strong-Tie H10A Hurricane Tie for connection a double top plate to a 2x rafter or truss. The H10A can also be field-bent to connect to shear blocking as well. The H10A uses (18) 10d .148" x 1-1/2" joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fastener Options: (18) 10d .148" x 1-1/2" H10A Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area...

Simpson Strong-Tie CS20 20-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS20 are approved for use with SD Screws as a nail...

Simpson Strong-Tie CS20 20-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS20 are approved for use with SD Screws as a nail substitution. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 250' (Length) Fasteners: 8d or 10d depending on end length and material (See information link below) CS20 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...

The Simpson Strong-Tie 3-1/2" x 9-1/2" MIT49.5 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...

The Simpson Strong-Tie 3-1/2" x 9-1/2" MIT49.5 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie PAB6-24-HDG 3/4" x 24" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems...

The Simpson Strong-Tie PAB6-24-HDG 3/4" x 24" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department...

The Simpson Strong-Tie SSTB28LHDG Hot Dipped Galvanized (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...

The Simpson Strong-Tie SSTB28LHDG Hot Dipped Galvanized (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 32-7/8" Minimum Embedment: 24-7/8" Finish: Hot...

Simpson Strong Tie LUS210SS Type 316L Stainless Steel 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...

Simpson Strong Tie LUS210SS Type 316L Stainless Steel 2 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS210SS Stainless Steel 2 x 10/12 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions:...

The Simpson Strong-Tie HTS24 14ga. x 24" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a...

The Simpson Strong-Tie HTS24 14ga. x 24" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS24 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 24" (Length) Fasteners:...