Login/Register
Shopping Cart
OR
This Danair AH-15H Auto Hammer comes with a Hard Yellow Tip installed in the tool. The Danair AH -15 Pneumatic Automatic Hammers® offer the Manufacturing, Fabricating and Assembly Industry a replacement to cumbersome hammers and mallets. The hammer mechanism starts with light pressure and stops immediately when the auto hammer is lifted from the surface. All Danair AH-15 Auto Hammer® have interchangeable hammer tips to handle soft woods and plastics to hard metals like steels....
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5A Ties can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (10) 8d x 1-1/2" Nails or (10) SD9 x 1-1/2" Screws H2.5A Information and Installation...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong Tie HUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS28 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions:...
Save by Purchasing a Pallet of 96 Boxes! The Simpson Strong-Tie A35 Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35 to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. Material: 18 Gauge Finish: Standard G90 Length: 4-1/2" Flange Widths: 1-7/16" Fasteners: (9-12) 8d x 1-1/2" (9-12) SD #9 x...
The CLC 5-Piece 5605 PRO Carpenter's Tool Bag Set is a premium quality 5-piece carpenter’s combo tool belt in ballistic poly fabric with a 5" padded, double-tongue roller buckle belt and 18 pockets with ample room for your favorite nails and tools. 18 pockets, sleeves and holders provide ample storage for nails and tools. Totally versatile-all parts removable and interchangeable. Patented easy-carry handle design provides simple adjustments, easy carrying and storage of apron without spilling...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH48-6 Girder Hangers is used to connect a 4 x 8 girder to a 6" foundation wall using 2x sill plate. 1-1/2 clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 5-5/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-6 Information and Installation Instructions. Gray Paint Coating Information...
Save by Purchasing a Quantity of 500 SSTB20 Bolts! The Simpson Strong-Tie SSTB20 (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum...
Extreme work calls for extreme tools, and the Senco FinishPro® 42XP is this tool! Replacing the work horse FinishPro® 41XP, the FinishPro 42XP has been redesigned with a new long life driver, new mainbody with improved durability, improved trigger ergonomics with reduced trigger reach. All backed by SENCO's NEW 5-Year Warranty. 5 Year Warranty Thumb Wheel Depth of Drive Stretch Comfort Grip No Mar Pad Never-Lube Magnesium Housing Easy Clear Jam Clearing 360 Degree Adjustable Exhaust...
The Senco JN91P1 1-1/2" - 2-1/2” Metal Connector Nailer delivers the power to drive 1-1/2” to 2-1/2” nails into the toughest substrates, including engineered lumber. This small and compact metal connector nailer fits easily between rafters and joists and the nosepiece design leads with a metal point for accurate nail placement into prepunched holes. Best-in-class power, designed to consistently drive through engineered lumber Single strip, allows for increased maneuverability in tight spaces...
This Danair AH-15AL Auto Hammer comes with an Aluminum Tip installed in the tool. The Danair AH -15 Pneumatic Automatic Hammers® offer the Manufacturing, Fabricating and Assembly Industry a replacement to cumbersome hammers and mallets. The hammer mechanism starts with light pressure and stops immediately when the auto hammer is lifted from the surface. All Danair AH-15 Auto Hammer® have interchangeable hammer tips to handle soft woods and plastics to hard metals like steels....
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/9.5 is used to install 2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.06/9.5 Information and Installation...