Login/Register
Shopping Cart
OR
Save by Purchasing a Quantity of 15 Boxes (150 Pieces)! The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
The Metabo-HPT NT65MA4 15-Gauge Angled Finish Nailer is used for installing cabinets, door and window casings, staircases and chair rails. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster, cleaner job completion. Equipped with a non-slip elastomer grip trigger Ergonomically designed simple flip actuation switch allows for either sequential or contact nailing Integrated...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90...
Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
Save by Purchasing a Quantity of 400 SSTB20L Bolts! The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum...
This Danair AH-15ST Auto Hammer comes with a Steel Tip installed in the tool. The Danair AH -15 Pneumatic Automatic Hammers® offer the Manufacturing, Fabricating and Assembly Industry a replacement to cumbersome hammers and mallets. The hammer mechanism starts with light pressure and stops immediately when the auto hammer is lifted from the surface. All Danair AH-15 Auto Hammer® have interchangeable hammer tips to handle soft woods and plastics to hard metals like steels. Performance:...
Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked concrete at elevated temperatures. SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths. SET-3G dispenses as a 1:1 ratio in two-component producing a high-strength, epoxy-based anchoring...
Save by Purchasing a Quantity of 24 Boxes (2400 Pieces)! Simpson Strong-Tie LU28 2 x 8 Joist Hangers are an economical and time saving solution to securely installing 2 x 8 joists to a wood ledger or beam. You can install LU28 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. LU28 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/11.88 is used to install 2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.06/11.88 Information and Installation...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH48-8/3 Girder Hangers is used to connect a 4 x 8 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 4-5/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-8/3 Information and Installation Instructions. Gray Paint Coating Information...
Made In USA! The Occidental Leather® B5080DB Black Pro Framer™ Nail Bag Set is designed for the serious carpenter who wants to make sure his tools are always close when they are needed. The Occidental Pro Framer set is fine-tuned for optimum efficiency and comfort so you can come to work every day knowing you won't be wasting time and energy fighting your tool bag. The Pro Leather Series is constructed of premium top grain cow hides tanned to our stringent specifications with a...