Ships Free

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.56/11.88 is used to install 2-1/2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-5/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.56/11.88 Information and Installation...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.56/9.5 installs 2-1/2" or 2-9/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses...

Save by Purchasing a Quantity of 200 SSTB28L Bolts! The Simpson Strong-Tie SSTB28L (7/8" Diameter by 32-7/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 8" Bolt Diameter: 7/8" Overall Length: 32-7/8" Minimum...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS2.56/11.88 installs 2-1/2" or 2-9/16" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.56/14 sets a new standard for engineered wood top flange hangers. The ITS2.56/14 installs 2-1/2" or 2-9/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...

Save by Purchasing a Quantity of 10 Boxes (250 Pieces)! Simpson Strong Tie HU212 2 x 12 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 9" (Height) x 2-1/4" (Seat Depth) Fasteners: (10) .162 x 3-1/2" (16d) Nails (Header) (6) .148 x 1-1/2"...

Save by Purchasing a Quantity of 24 Boxes (600 Pieces)! Simpson Strong-Tie ITS3.56/11.88 sets a new standard for engineered wood top flange hangers. The ITS3.56/11.88 installs 3-1/2" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...

Save by Purchasing a Quantity of 6 Boxes (300 Pieces)! Simpson Strong Tie HU46 4 x 6 Standard Face Mount Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU46 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x...

Save by Purchasing a Quantity of 12 Boxes (300 Pieces)! Simpson Strong Tie HUC46 4 x 6 Reversed Flange Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC46 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang joist or beams flush at corners or any other...

Save by Purchasing a Quantity of 18 Boxes (450 Pieces)! Simpson Strong Tie HU48 4 x 8 Standard Face Mount Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU48 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x...

Save by Purchasing a Quantity of 10 Boxes (250 Pieces)! Simpson Strong Tie HUC48 4 x 8 Reversed Flange Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC48 hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang joists and beams flush at corners or any other...

Save by Purchasing a Quantity of 12 Boxes (300 Pieces)! Simpson Strong Tie HU410 4 x 10 Standard Face Mount Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU410 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Low Dimensions: 3-9/16"...