Ships Free

The Benner-Nawman MBC-16B High Leverage Bender/Cutter has been designed to cut and bend rebar up to #5 (5/8") grade 60. This new high-leverage arrangement greatly reduces cutting and bending effort. Longer handle and cam mechanism provides greater leverage when cutting and bending grade 60 rebar.Adjustable 2-1/2" (63.5mm) diameter bending roller. Replaceable cutting jaws have two open slots with innovative shaped blades to prevent chipping of the jaws.Sturdy frame design is firmly mounted on a...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS1.81/11.88 Information and Installation...

Save by Purchasing a Quantity of 32 Boxes (800 Pieces)! Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...

Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-8 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8 Information and Installation Instructions. Gray Paint Coating Information...

The Metabo-HPT DH40MC 1-9/16" SDS Max Rotary Hammer is designed to take on a variety of tasks including drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. The powerful 10 amp motor produces 6.3 foot pounds of Impact Energy and delivers top of class drilling speed. It's also easy and comfortable to use with an oversized knob that changes the mode from hammer drilling to hammer only, and an oversized trigger that...

Save by Purchasing a Quantity of 10 Boxes (500 Pieces)! Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/16" (Height) x 2-1/4" (Seat Depth) Fasteners: (4) .162 x 3-1/2" (16d) Nails (Header) (2) .148 x...

Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie H1AZ Zmax® Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Holds the rafter or truss on both sides for high lateral load resistance...

The Metabo-HPT 16-Gauge N5024A2 P-Series 1" Wide Crown Stapler is ideal for lathing, sheathing, and insulation installation. Its lighter weight (only 4.7 lbs) and cylinder valve firing mechanism provide a powerful response and less user fatigue. The 1" to 2" length capability means you have the flexibility to install various materials with multiple thickness. The high-grade aluminum magazine not only provides exceptional durability but also prevents jams caused by fastener overlap. The...

Extreme Accuaracy and Versatilty! The SOLA LSB48D 48" Big Red Digital Level is ideal to use anywhere, where inclinations, slopes and angles need to be measured quickly and precisely. This level is highly precise with an integrated electronic inclinometer module and Bluetooth interface. Furthermore, they are sturdy and easy to use. Optimal Readability For Inverted Measurements! When taking inverted measurements, the digital display automatically rotates on the module. This is particularly...

For years contractors have been asking "If they can have a nailer for pretty much every other jobsite nailing requirement, why not a duplex nail?". Finally the The Metabo-HPT NR3675DD Cordless Duplex Nailer is here to answer that question. This revolutionary tool changes concrete forming on the jobsite as it allows for a massive productivity boost vs. hand driving Duplex nails. Saving valueable time means saving money! Move quickly while building concrete forms and scaffolding with the...

The Metabo-HPT NV45AB2 1-3/4" Coil Roof Nailer is used for various construction works such as the installation of asphalt roofing shingles and the installation of insulation boards. The NV45AB2 features rapid driving and unprecedented quick response with unique cylinder valve firing mechanism allowing you to fire up to 3 nails per second. 5.5lbs, lightweight and well balanced for easy maneuverability Side loading magazine, convenient and easy for quick replenishment Tool-less depth of drive...

The Metabo-HPT NT50AE2 2" 18ga Brad Nailer is engineered with the safety behind the narrow nose piece and short center height to allow for nail placement in hard to reach areas and corners. The depth of drive dial allows the user to easily adjust the drive depth for a professional finish. NT50AE2 accepts 5/8" to 2" 18-gauge fasteners New selective actuation switch lets the user easily select bump fire or sequential fire modes At only 2.2 lbs, it is well balanced and lightweight to make finish...