Ships Free

Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH48-8 Girder Hangers is used to connect a 4 x 8 girder to a 8" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 5-5/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-8 Information and Installation Instructions. Gray Paint Coating Information...

Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked concrete at elevated temperatures. SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths. SET-3G dispenses as a 1:1 ratio in two-component producing a high-strength, epoxy-based anchoring...

The Metabo-HPT NR65AK2 is the answer to increasing your productivity when fastening straps, clips, joist hangers and more. This tool uses the nail to find the hole in the metal connector eliminating most chances of missing the hole. Weighing only 6.4 lbs means you can use the NR65AK2 hours at a time without becoming fatigued. Lightweight at 6.4 lbs for easy maneuverability Narrow design for ease of use in tight spaces Adjustable air deflector directs the air exhaust in any direction...

The Metabo-HPT NT65MA4 15-Gauge Angled Finish Nailer is used for installing cabinets, door and window casings, staircases and chair rails. Its compact body and angled magazine make for easier placement and operation in tight angles. The integrated air duster clears debris from the work site allowing for faster, cleaner job completion. Equipped with a non-slip elastomer grip trigger Ergonomically designed simple flip actuation switch allows for either sequential or contact nailing Integrated...

The Max SN883RH3 21° 3-1/4" Full Round Head SuperFramer® is designed for multiple applications such as framing, sheathing, decking, sub flooring and furring. At 11-7/8" the SN883RH3 is 30% shorter than conventional tools. Hard to reach places and unconventional angles won't pose a problem for carpenters when using this nailer. MAX is committed to manufacturing reliable tools that have been designed to deliver enhanced performance while making sure that users can carry out safe operations....

Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90...

Save by Purchasing a Quantity of 10 Boxes (60 Pieces)! The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x...

Save by Purchasing a Pallet of 44 Boxes! Simpson Strong-Tie MASAPZ ZMaz®anchors are a labor saving solution to 1/2" and 5/8" standard anchor bolts for 2x, double-2x and 3x mudsills. The MASAPZ is not only quick to install they also eliminate the added cost of installing a bearing plate on the anchor bolt. This MASAPZ version is used for installation on panelized forms. This anchor featured ZMax® coating when additional corrosion resistance is needed. Attaches easily to the concrete...

Save by Purchasing a Quantity of 15 Boxes (150 Pieces)! The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...

Save by Purchasing a Quantity of 24 Boxes (2400 Pieces)! Simpson Strong-Tie LU28 2 x 8 Joist Hangers are an economical and time saving solution to securely installing 2 x 8 joists to a wood ledger or beam. You can install LU28 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. LU28 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...

This Danair AH-15ST Auto Hammer comes with a Steel Tip installed in the tool. The Danair AH -15 Pneumatic Automatic Hammers® offer the Manufacturing, Fabricating and Assembly Industry a replacement to cumbersome hammers and mallets. The hammer mechanism starts with light pressure and stops immediately when the auto hammer is lifted from the surface. All Danair AH-15 Auto Hammer® have interchangeable hammer tips to handle soft woods and plastics to hard metals like steels. Performance:...

Save by Purchasing a Quantity of 400 SSTB20L Bolts! The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum...