Login/Register
Shopping Cart
OR
Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie LTP4 Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. Material: 20 Gauge Finish: Standard G90 Length: 4-1/4" Width: 3" Fasteners: (12) 8d x 1-1/2" (12) SD #9 x 1-1/2" LTP4 Information and Installation Instructions Standard G90 Zinc Galvanized Coating...
Made In USA! For more than 30 years, the Occidental Leather Pro Framer™ has been the benchmark by which all other tool belts have been measured. Designed by and for the professional builder, this traditional belt set is fine tuned for optimum efficiency and comfort.The Pro Leather™ Series is constructed of premium top grain cow hides tanned to stringent specifications with a special blend of oils and waxes that meet the demands of heavy outdoor use. This Occidental Leather®...
Save by Purchasing a Quantity of 12 Boxes (72 Pieces)! Simpson Strong-Tie HDU8-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (20) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard...
Save by Purchasing a Quantity of 72 Boxes (3600 Pieces)! Simpson Strong-Tie LU210 2 x 10 Joist Hangers are an economical and time saving solution to securely installing 2 x 10 joists to a wood ledger or beam. You can install LU210 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. LU210 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws. LU210 Hangers can also be used with 2 x 12 and 2 x 14 joists when...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/14 sets a new standard for engineered wood top flange hangers. The ITS2.06/14 installs 2" or 2-1/16" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...
Made In USA! The Occidental Leather 8080DB Oxylight™ Framer Tool Bag Sets are Identical to the style and function of the Pro Framer Leather 5080DB Nail Bag Sets, but offering reduced weight with functional durability. Designed by and for the professional builder, this traditional belt set is fine-tuned for optimum efficiency and comfort. The leather and industrial nylon are intelligently combined to lighten the carpenters load thus reducing fatigue and increasing productivity. The...
Save by Purchasing a Quantity of 72 Boxes (3600 Pieces)! Simpson Strong Tie LUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS28 2 x 8 Hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions:...
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties...
Save by Purchasing a Quantity of 500 SSTB24 Bolts! The Simpson Strong-Tie SSTB24 (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 25-5/8" Minimum...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single top plate to the rafter or truss. The Simpson H3 requires (8) 8d joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (8) 8d x 2-1/2" Nails H3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
Simpson Strong-Tie CS16SS-R Stainless Steel 16-Gauge Coil Strap allows you to install 1-1/4" wide strapping at various lengths depending on your span requirements. CS16SS-R are approved for use with SD Screws as a nail substitution. 25' packs are an economical choice when you do not require large amounts. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 25' (Length) Fasteners: 8d or 10d depending on end length and material (See link below for more information)...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.37/9.5 is used to install 2-5/16" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-7/16" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.37/9.5 Information and Installation...