Login/Register
Shopping Cart
OR
The THDB62500HMG Mechanical Galvanized 5/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...
The THDB62500HMG Mechanical Galvanized 5/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...
The Simpson Strong-Tie 4" x 9-1/2" MIT4.12/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4" x 9-1/2" MIT4.12/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
Simpson Strong Tie LUS310 3 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie LUS310 3 x 10/12 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS310 3 x 10/12 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 7-1/4" (Height) x 2" (Seat Depth) Fastener...
The Simpson Strong-Tie 4" x 11-7/8" MIT4.12/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4" x 11-7/8" MIT4.12/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
Simpson Strong Tie HU214 2 x 14 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HU214 2 x 14 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 10-1/8" (Height) x 2-1/4" (Seat Depth) Fasteners: (12) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 1-1/2" 10d Nails (Joist) HU214 Information and...
The Simpson Strong-Tie SUL2.06/9 Skewed 45° Left Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUL2.06/9 Skewed 45° Left Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 9-1/16" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...
The Simpson MIU8.12/9 hanger is designed to hang 5" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/9 features positive-angle...
The Simpson MIU8.12/9 hanger is designed to hang 5" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/9 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The H16S Hurricane-Tie has a pre-sloped seat of 5/12 for double trusses. The pre-sloped seat of the H16 series ties provides for a tight fit and reduced deflection. The strap length provides for...
The H16S Hurricane-Tie has a pre-sloped seat of 5/12 for double trusses. The pre-sloped seat of the H16 series ties provides for a tight fit and reduced deflection. The strap length provides for various truss height up to a maximum of 13 1/2" (H16 series). Minimum heel height for H16 series is 4". Truss rafter pitch of 3/12 to 7/12 is acceptable. Shorter strap allows for less wrapping of straps when applicable. Material: 18 Gauge Width: 1-5/8" Height: 11-11/16" Finish: Standard G90 Zinc...
The THDB62600H 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THDB62600H 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
The H16-2 Hurricane-Tie has a pre-sloped seat of 5/12 for double trusses. The pre-sloped seat of the H16 series ties provides for a tight fit and reduced deflection. The strap length provides for...
The H16-2 Hurricane-Tie has a pre-sloped seat of 5/12 for double trusses. The pre-sloped seat of the H16 series ties provides for a tight fit and reduced deflection. The strap length provides for various truss height up to a maximum of 13 1/2" (H16 series). Minimum heel height for H16 series is 4". Truss rafter pitch of 3/12 to 7/12 is acceptable. Material: 18 Gauge Width: 3-1/4" Height: 18-3/4" Finish: Standard G90 Zinc Fasteners: To Rafter/Truss: (2) 10d x 1-1/2" Nails To Plates: (10) 10d x...
The THDB62600HMG Mechanical Galvanized 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...
The THDB62600HMG Mechanical Galvanized 5/8" x 6" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...
The Simpson Strong-Tie HUC612TF is a hybrid 6 x 12 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with...
The Simpson Strong-Tie HUC612TF is a hybrid 6 x 12 concealed flange hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty joist hanger is designed with two concealed flanges for end-of-wall or corner installation. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16) .162...
The Simpson Strong-Tie HU612TF is a hybrid 6 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...
The Simpson Strong-Tie HU612TF is a hybrid 6 x 12 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 11" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (16) .162...
The Simpson MIU5.12/11 hanger is designed to hang 5" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/11 features positive-angle...
The Simpson MIU5.12/11 hanger is designed to hang 5" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL2.06/11 Skewed 45° Left Hanger can be used when hanging a 2" x 11-7/8" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...
The Simpson Strong-Tie SUL2.06/11 Skewed 45° Left Hanger can be used when hanging a 2" x 11-7/8" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 11-7/8" engineer wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 11-1/4" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...
The Simpson Strong-Tie 4-1/8" x 9-1/2" MIT4.28/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4-1/8" x 9-1/2" MIT4.28/9.5 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson Strong-Tie 4-1/8" x 11-7/8" MIT4.28/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...
The Simpson Strong-Tie 4-1/8" x 11-7/8" MIT4.28/11.88 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard...
Simpson Strong Tie HU216 2 x 16 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...
Simpson Strong Tie HU216 2 x 16 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 12-15/16" (Height) x 2-1/4" (Seat Depth) Fasteners: (18) .162" x 3-1/2" 16d Nails (Header) (8) .148" x 1-1/2" 10d Nails (Joist) HU216 Information and...
The Simpson Strong-Tie SUL2.06/14 Skewed 45° Left Hanger can be used when hanging a 2" x 14" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUL2.06/14 Skewed 45° Left Hanger can be used when hanging a 2" x 14" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 14" engineered wood joist end may be square or beveled cut. Please Note: This hanger can be used for hanging 2" x 16" engineered wood joist with a required web stiffener. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson MIU5.12/14 hanger is designed to hang 5" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/14 features positive-angle...
The Simpson MIU5.12/14 hanger is designed to hang 5" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong-Tie EMN22i Mixing Nozzles designed for the proper proportioning and mixing of the SET22, SET-XP22 and ET22 Epoxies. This is a one piece unit with an integrated nut to easily fasten to...
Simpson Strong-Tie EMN22i Mixing Nozzles designed for the proper proportioning and mixing of the SET22, SET-XP22 and ET22 Epoxies. This is a one piece unit with an integrated nut to easily fasten to the cartridge. The EMN22i nozzle ensures the resin and hardener of the applicable Simpson epoxy adhesives are mixed in the proper ratio when dispensing. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or...
The THDB62612H 5/8" x 6-1/2" (10/Box) Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the...
The THDB62612H 5/8" x 6-1/2" (10/Box) Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques....
The Simpson AMN19Q Mixing Nozzles are specifically designed to use with Simpson Acrylic-Tie Adhesives AT-XP13, AT-XP30, AT-XP10, AT10, AT13 and AT30. Package includes 5 nozzles with integrated nut...
The Simpson AMN19Q Mixing Nozzles are specifically designed to use with Simpson Acrylic-Tie Adhesives AT-XP13, AT-XP30, AT-XP10, AT10, AT13 and AT30. Package includes 5 nozzles with integrated nut to easily install on AT epoxy cartridge as well as 5 extensions for those hard to reach applications. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of...
The THDB62800H 5/8" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THDB62800H 5/8" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...