Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie 1-3/4" x 14" MIT1.81/14 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...
The Simpson Strong-Tie 1-3/4" x 14" MIT1.81/14 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson MIU1.81/14 hanger is designed to hang 1-3/4" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/14 features positive-angle...
The Simpson MIU1.81/14 hanger is designed to hang 1-3/4" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong Tie U24-2 Double 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U24-2 Double 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 3" (Height) x 2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 3" 10d Nails (Joist) U24-2 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
The Simpson Strong-Tie CJT4ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...
The Simpson Strong-Tie CJT4ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT4ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 10 Glulam Beam - 5-1/8" x 9" Material: 12 Gauge Finish:...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-8 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 2x sill plate. 1-1/2" clearance...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH46-8 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 2x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 3-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8 Information and Installation Instructions. Gray Paint Coating Information...
Simpson Strong Tie HGUS26-4 Quad Double Shear Face Mount Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require....
Simpson Strong Tie HGUS26-4 Quad Double Shear Face Mount Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-4 hangers are designed to accept four 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 6-9/16" (Wide) x 5-7/16" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails...
Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for...
Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for various trusses. Additionally you can have the HTU28-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...
Save by Purchasing a Quantity of 10 Boxes (500 Pieces)! Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist...
Save by Purchasing a Quantity of 10 Boxes (500 Pieces)! Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/16" (Height) x 2-1/4" (Seat Depth) Fasteners: (4) .162 x 3-1/2" (16d) Nails (Header) (2) .148 x...
The Simpson Strong-Tie HU26-2TF is a hybrid 2 x 6-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features...
The Simpson Strong-Tie HU26-2TF is a hybrid 2 x 6-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top...
Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2-SDS hangers with concealed...
Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws...
Simpson Strong Tie HUS26-2 Double 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie HUS26-2 Double 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5-3/16" (Height) x 2" (Seat Depth) Fastener Options: (4) 16d Nails or SD10212 Screws(Header) (6) 16d Nails...
Save by Purchasing a Quantity of 32 Boxes (800 Pieces)! Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4" x 9-1/2"...
Save by Purchasing a Quantity of 32 Boxes (800 Pieces)! Simpson Strong-Tie ITS1.81/9.5 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/9.5 installs 1-3/4" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1...
Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...
The Simpson Strong-Tie LSSJ28RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes...
The Simpson Strong-Tie LSSJ28RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ28RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...
The Simpson Strong-Tie LSSR210Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 10 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...
The Simpson Strong-Tie LSSR210Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 10 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 2-1/2" (Flange Width) x 9-1/8" (Height) x 1-9/16" (Joist Width) Fastener...
Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with 10d ,16d nails...
Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-1/2" (Seat Depth) Fastener Options: (6) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 1-1/2" 10d Nails (Joist)...