Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson MIU2.1/11 hanger is designed to hang 2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.1/11 features positive-angle...
The Simpson MIU2.1/11 hanger is designed to hang 2" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.1/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUR26 Skewed Right 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate...
The Simpson Strong-Tie SUR26 Skewed Right 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) .162" x 3-1/2" 16d Nails (Face) (6) .148" x...
Simpson Strong Tie U26R 2 x 6/8 Rough Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U26R 2 x 6/8 Rough Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 5-5/8" (Height) x 2" (Seat Depth) Fastener Options: (8) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 1-1/2" 10d Nails (Joist) U26R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie BA1.81/11.88 Top Flange Hanger is designed for 1-3/4" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid...
The Simpson Strong-Tie BA1.81/11.88 Top Flange Hanger is designed for 1-3/4" x 11-7/8" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...
The Simpson Strong-Tie CJT6ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...
The Simpson Strong-Tie CJT6ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT6ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 12 Glulam Beam - 5-1/8" x 12" Material: 12 Gauge Finish:...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH48-6 Girder Hangers is used to connect a 4 x 8 girder to a 6" foundation wall using 2x sill plate. 1-1/2 clearance hole...
Save by Purchasing a Quantity of 6 Boxes (90 Pieces)! The Simpson Strong Tie GH48-6 Girder Hangers is used to connect a 4 x 8 girder to a 6" foundation wall using 2x sill plate. 1-1/2 clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 5-5/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-6 Information and Installation Instructions. Gray Paint Coating Information...
Simpson Strong Tie HGUS28-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS28-3 hangers are...
Simpson Strong Tie HGUS28-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS28-3 hangers are designed to accept three 2 x 8 truss plates or joists with a minimum heel height of 6-13/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 4-15/16" (Wide) x 7-1/4" (Height) x 4" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter Nails Not Allowed...
Simpson Strong Tie HGUS28-4 Quad Face Mount Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require....
Simpson Strong Tie HGUS28-4 Quad Face Mount Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS28-4 hangers are designed to accept four 2 x 8 truss plates or joists with a minimum heel height of 6-13/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 6-9/16" (Wide) x 7-3/16" (Height) x 4" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter...
Simpson Strong Tie HU26-3 Triple 2 x 6/8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU26-3 Triple 2 x 6/8 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU26-3 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 4-11/16" (Wide) x 4-5/8" (Height) x 2-1/2" (Seat Depth)...
Simpson Strong Tie HUCQ210-3-SDS 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-3-SDS hangers with concealed...
Simpson Strong Tie HUCQ210-3-SDS 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-3-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws...
Simpson Strong Tie HUS28Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie HUS28Z ZMax® 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS28 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-5/8" (Wide) x 7" (Height) x 3" (Seat...
Simpson Strong-Tie ITS1.81/16 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/16 installs 1-3/4" x 16" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS1.81/16 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/16 installs 1-3/4" x 16" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist...
Simpson Strong-Tie IUS2.06/9.5 is used to install 2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS2.06/9.5 is used to install 2" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS2.06/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
The Simpson Strong-Tie LSSR2.56Z Slopeable and Skewable Rafter Hanger allows you to install a 2-1/2" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...
The Simpson Strong-Tie LSSR2.56Z Slopeable and Skewable Rafter Hanger allows you to install a 2-1/2" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 4-1/8" (Flange Width) x 8-15/16" (Height) x 2-9/16" (Joist Width) Fastener...
Simpson Strong-Tie LUC26SS Type 316L Stainless Steel 2 x 6/8Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC26SS also provides cleaner lines for exposed...
Simpson Strong-Tie LUC26SS Type 316L Stainless Steel 2 x 6/8Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC26SS also provides cleaner lines for exposed conditions such as overhead decks. Material: 18 Gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-3/4" (Seat Depth) Fastener Options: (6) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 1-1/2" 10d Nails (Joist) Strong Drive® SD9112 #9 x 1-1/2" Structural Screws...
Simpson Strong Tie LUS26Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS26Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26Z hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-3/4" (Seat...