Driltec, Inc

The Driltec SM-045-045 1/2" x 10-3/4" x 17-1/2" Carbide SDS-Max Bit with a Bionic® Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC® drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

The Driltec AE-050-131 3/8" x 4" x 10" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and performance....

The Driltec ADX006014 3/16" x 2" (Usable Length) 4-1/4" (Total Length) SDS-Plus Carbide Bit is designed for continuous drilling through concrete with embedded rebar and steel. This bit will save you time and labor of having to change out bits every time you encounter the rebar and/or steel decking. Important: Before drilling rebar please consult a structural design engineer/architect for approval. Solid-Cross-Configuration of ADX carbide head. Firm and secured carbide embedment with flank side...

Each Driltec RebarCutter™ Carbide Bit is used in the hammer mode of an SDS-Plus rotary hammer. This RA-030-030 SDS-Plus adapter accepts the male thread of the Driltec RebarCutter™ to complete the system.

The Driltec AG-603-603 10" SDS PLUS Bull Point is used for breaking apart small amounts of concrete. Why Driltec Electric Hammer Chisels Are Simply The Best! Manufactured from the highest grade chrome, nickel, molybdenum steel. Forged points (no grinding) provide for an even horizontal grain structure, resulting in much longer tool service life CNC machined connectors for tied tool fit increasing the tool performance Case hardened with shot peened surface treatment to prevent premature fatigue...

The Driltec TP-001-001 Concrete and Masonry Tapcon Style Installation Kit is ideal for drilling the hole & installing the fastener with just one power tool. The kit offers a sturdy and complete set of tools to get the job done quickly and effiently. The SDS-Plus bits fit directly into SDS-Plus Rotary Hammers. The sleeve will tightly fit over hex on the drill bit. Check with screw manufacturer’s manual for proper screw installation. Drill bits are sold separately. Sturdy and complete set of...

The RL-050-190 Driltec 1/2" X 7-1/2" (useable length) x 9" Ratio Rebar Cutter Bit is used with an SDS-Plus rotary hammer for drilling through rebar embedded in concrete or masonry. This bit is used in the hammer mode so it not only drills the rebar but chips it away. This creates a faster drilling process. With the Driltec uniquely durable and aggressive carbide tips you save time and money in labor and replacement costs. Note: SDS-Plus Adapter is not included. It must be purchased separately...

The Driltec ADX006018 3/16" x 4" (Usable Length) 6-1/4" (Total Length) SDS-Plus Carbide Bit is designed for continuous drilling through concrete with embedded rebar and steel. This bit will save you time and labor of having to change out bits every time you encounter the rebar and/or steel decking. Important: Before drilling rebar please consult a structural design engineer/architect for approval. Solid-Cross-Configuration of ADX carbide head. Firm and secured carbide embedment with flank side...

The Driltec AE-070-133 1/2" x 9-1/2" x 16" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

The Driltec AG-110-192 12" Spline Shank Bull Point Chisel fits in most spline shank rotary hammers. This bull point chisel is mostly used for breaking concrete in either small jobs or tight situations. Why Driltec Electric Hammer Chisels Are Simply The Best! Manufactured from the highest grade chrome, nickel, molybdenum steel. Forged points (no grinding) provide for an even horizontal grain structure, resulting in much longer tool service life CNC machined connectors for tied tool fit...

The Driltec SM-060-060 1/2" x 15-1/4" x 21-1/2" Carbide SDS-Max Bit with a Bionic® Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC® drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

The Driltec SM-120-120 5/8" x 7-1/2" x 13-1/2" Jet-Head® SDS-MAX Bit is unlike other "Multi-Cutter" drill bits which are basically 2-Cutters. Jet-Head® drill bits will drill true round holes. The 3-dimensional cutting edges of the main Bionic® tip together with two strong side cutters enable you to drill smooth round holes. The Driltec Jet-Head® carbide head provides for smooth and high performance drilling, with less vibration. This means less wear and tear on both your rotary...

The Driltec AG-115-193 16" Spline Shank Bull Point Chisel fits in most spline shank rotary hammers. This bull point chisel is mostly used for breaking concrete in either small jobs or tight situations. Why Driltec Electric Hammer Chisels Are Simply The Best! Manufactured from the highest grade chrome, nickel, molybdenum steel. Forged points (no grinding) provide for an even horizontal grain structure, resulting in much longer tool service life CNC machined connectors for tied tool fit...

The Driltec AE-075-217 1/2" x 15-1/2" x 22" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

The Driltec ADX001024 (Pack of 12 Bits) 3/16" x 4" (Usable Length) 6-1/4" (Total Length) SDS-Plus Carbide Bit is designed for continuous drilling through concrete with embedded rebar and steel. This bit will save you time and labor of having to change out bits every time you encounter the rebar and/or steel decking. Important: Before drilling rebar please consult a structural design engineer/architect for approval. Solid-Cross-Configuration of ADX carbide head. Firm and secured carbide...

The RL-050-420 Driltec 1/2" X 16" (useable length) x 18" Ratio Rebar Cutter Bit is used with an SDS-Plus rotary hammer for drilling through rebar embedded in concrete or masonry. This bit is used in the hammer mode so it not only drills the rebar but chips it away. This creates a faster drilling process. With the Driltec uniquely durable and aggressive carbide tips you save time and money in labor and replacement costs. Note: SDS-Plus Adapter is not included. It must be purchased separately to...

The RL-056-190 Driltec 9/16" X 7-1/2" (useable length) x 9" Ratio Rebar Cutter Bit is used with an SDS-Plus rotary hammer for drilling through rebar embedded in concrete or masonry. This bit is used in the hammer mode so it not only drills the rebar but chips it away. This creates a faster drilling process. With the Driltec uniquely durable and aggressive carbide tips you save time and money in labor and replacement costs. Note: SDS-Plus Adapter is not included. It must be purchased separately...

The Driltec AG-230-203 11" SDS-MAX Bull Point Chisel fits in most SDS-Max rotary hammers. This bull point chisel is mostly used for breaking concrete in either small jobs like remodeling or tight situations where it is not practical to use a larger air or electric hammer hammer. Why Driltec Electric Hammer Chisels Are Simply The Best! Manufactured from the highest grade chrome, nickel, molybdenum steel. Forged points (no grinding) provide for an even horizontal grain structure, resulting in...

The Driltec ADX006022 3/16" x 6" (Usable Length) 8-1/4" (Total Length) SDS-Plus Carbide Bit is designed for continuous drilling through concrete with embedded rebar and steel. This bit will save you time and labor of having to change out bits every time you encounter the rebar and/or steel decking. Important: Before drilling rebar please consult a structural design engineer/architect for approval. Solid-Cross-Configuration of ADX carbide head. Firm and secured carbide embedment with flank side...

The Driltec AE-080-134 1/2" x 20-1/2" x 27" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and...

The Driltec SM-150-150 5/8" x 15-1/4" x 21-1/2" Jet-Head® SDS-MAX Bit is unlike other "Multi-Cutter" drill bits which are basically 2-Cutters. Jet-Head® drill bits will drill true round holes. The 3-dimensional cutting edges of the main Bionic® tip together with two strong side cutters enable you to drill smooth round holes. The Driltec Jet-Head® carbide head provides for smooth and high performance drilling, with less vibration. This means less wear and tear on both your...

The Driltec SM-165-165 5/8" x 22" x 28" Jet-Head® SDS-MAX Bit is unlike other "Multi-Cutter" drill bits which are basically 2-Cutters. Jet-Head® drill bits will drill true round holes. The 3-dimensional cutting edges of the main Bionic® tip together with two strong side cutters enable you to drill smooth round holes. The Driltec Jet-Head® carbide head provides for smooth and high performance drilling, with less vibration. This means less wear and tear on both your rotary hammer...

The Driltec AE-085-301 1/2" x 30" x 36" Carbide Spline Shank Bit with a Bionic Cutter features a unique concave carbide tip design that accelerates drilling speed, reduces wear and supports dust removal. The carbide is totally embedded in both sides of the steel body. Independently verified performance tests prove, that the Driltec BIONIC drill bits not only are exceptionally fast but to also substantially outperform other leading manufacturers when it comes to drill bit life and performance....

The Driltec ADX006026 3/16" x 8" (Usable Length) 10-1/4" (Total Length) SDS-Plus Carbide Bit is designed for continuous drilling through concrete with embedded rebar and steel. This bit will save you time and labor of having to change out bits every time you encounter the rebar and/or steel decking. Important: Before drilling rebar please consult a structural design engineer/architect for approval. Solid-Cross-Configuration of ADX carbide head. Firm and secured carbide embedment with flank...