Metabo-HPT Power Tools

The Metabo-HPT Power Tool's 8 Amp VB16Y Rebar Bender and Cutter allows you to field cut and bend 3/8", 1/2" and 5/8" grade 60 rebar up to 180°'s. Weighing only 39.7 lbs. makes it easy to set up and move around the jobsite reducing time to get the job competed. Includes: Deflection Guard (320914), Cutter Set (1 pair) (319706) and D62 Center Roller (319714) 8 Amp motor, iintense power (530W) that it uniformly bends up to No.5 (3/8", 1/2", 5/8") Grade 60 rebar at a maximum angle of 180...

The Metabo-HPT NR83A5 Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing and mobile home and modular home construction. The NR83A5 is like the original NR83A that you have come to trust, but now with an improved trigger design and sharing all the same internal parts as the original NR83A .The NR83A5 relies on the same cylinder valve drive system as the NR83A,...

The Hitachi 882-874 Cylinder O-ring can be seen on the following parts breakdowns: NR65AK schematic (#13)

The Hitachi 874-436 O-ring can be seen on the following parts breakdowns: NR83A schematic (#53) NR83A2 schematic (#55) NR83A3 schematic (#58)

The Hitachi 877-763 O-ring can be seen on the following parts breakdowns: NV45AB2 schematic (#62)

The Hitachi 878-178 Compression Spring can be seen on the following parts breakdowns: NV45AB2 schematic (#35)

The Hitachi 878-863 O-Ring can be seen on the following parts breakdowns: NR65AK schematic (#11)

The Hitachi 877-397 Stopper Spring can be seen on the following parts breakdowns: NR83A schematic (#76) NR83A2 schematic (#89) NR83A3 schematic (#91)

The Hitachi 877-854 gasket (C) can be seen on the following parts breakdown: NR83A schematic (#9A) NR83A2 schematic (#8) NR83A3 schematic (#8)

The Metabo HPT (Formerly Hitachi Power Tools) Guard Cover can be seen on the following parts breakdowns: NR83A2 schematic (#31) NR83A3 schematic (#31) California Proposition 65 Warning: The following warning is a requirement of DHC Supplies to post on our website in order to sell the above product into the state of California. Please view the current product SDS sheet(s) (if available) listed above and visit the California Prop 65 Home Page for more information. WARNING! This product can...

The Hitachi 887-841 Spring can be seen on the following parts breakdowns: NR83A2 schematic (#46A) NR83A3 schematic (#44)

The Hitachi 875-638 O-ring can be seen on the following parts breakdowns: NR83A schematic (#56) (3 required) NR83A2 schematic (#63) NR83A3 schematic (#73) (3 required) NV45AB2 schematic (#52)

The Hitachi 874-820 Plunger O-ring can be seen on the following parts breakdowns: NR83A schematic (#78) NR83A2 schematic (#67) NV45AB2 schematic (#49)

The Hitachi 884-570 Magazine can be seen on the following part breakdowns: NR83A schematic (#81) NR83A2 schematic (#94) NR83A3 schematic (#85) Please Note: If your NR83 Nailer has a bracket with one hole order part #884066 with the magazine. ...

The Hitachi 878-419 Guard (A) can be seen on the following parts breakdown: NR83A schematic (#36C)

The Hitachi 877-365 Spring can be seen on the following parts breakdowns: NR83A schematic (#49)

The Hitachi 883-452 Gasket (B) can be seen on the following parts breakdowns: NR65AK schematic (#6)

The Hitachi 883-432 Piston Bumper can be seen on the following parts breakdowns: NR65AK schematic (#19)

The Hitachi 883-447 Guard can be seen on the following parts breakdowns: NR65AK schematic (#23)

The Hitachi 883-470 Spring can be seen on the following parts breakdowns: NR65AK schematic (#29A)

The Hitachi 883-461 Magazine Cover can be seen on the following parts breakdowns: NR65AK schematic (#71)

The Hitachi 883-462 Nail Gate can be seen on the following parts breakdowns: NR65AK schematic (#72)

The Hitachi 883-436 Nail Feeder can be seen on the following parts breakdowns: NR65AK schematic (#83)

The Hitachi 883-441 Feeder Spring can be seen on the following parts breakdowns: NR65AK schematic (#84)