Refine Search By Filter(s)

Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws
Price: $6.59
Availability: Stock
Simpson Strong-Tie Item #: HGA10 -

    The Simpson Strong-Tie HGA10 Gusset Angle w/SDS Screws attaches to the top plate and gable trusses or rim joist to provides good lateral (cross) wind resistance. Each Bracket Includes: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws Material: 14 Gauge Finish: Standard G90 Zinc Fastener Included: (4) 1/4" x 1-1/2" SDS Screws and (4) 1/4" x 3" SDS Screws HGA10 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...

    Simpson Strong-Tie A34 Framing Clip
    Price: $0.38
    Availability: Stock
    Simpson Strong-Tie Item #: A34 -

      The Simpson Strong-Tie A34 Framing Clips for wood to wood connections at a 90° angle. Material: 18 Gauge Finish: Standard G90 Galvanized Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...

      Simpson Strong-Tie CJT3ZS Concealed Joist Ties
      Price: $30.61
      Availability: Stock
      Simpson Strong-Tie Item #: CJT3ZS -

        The Simpson Strong-Tie CJT3ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3ZS short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 6 Glulam Beam - 3-1/8" x 7-1/2" PSL - 3-1/2 x...

        Simpson Strong-Tie DSC2L-SDS3 Drag Strut Connectors
        Price: $41.35
        Availability: Stock
        Simpson Strong-Tie Item #: DSC2L-SDS3 -

          The Simpson Strong-Tie DSC2L-SDS3 Left Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2L-SDS3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

          Simpson Strong-Tie GBC Gable Brace Connector
          Price: $4.41
          Availability: Stock
          Simpson Strong-Tie Item #: GBC -

            Simpson Strong-Tie GBC Gable Brace Connector provides improved anchorage of gable bracing to the exterior wall. Installation flexibility for brace angle. GBC has tension and compression capacities. GBC clips must be installed in pairs to reach full load capacity. Material: 16 Gauge Finish: Standard G90 Zinc Installation Angles: 40° to 60° Fasteners-Gable Brace: (5) 8d x 1-1/2" Nails Fasteners-Top Plates: (7) 8d Nails GBC Information and Installation Instructions. Standard G90 Zinc...

            Simpson Strong-Tie H1 Hurricane Clip
            Price: $0.68
            Availability: Stock
            Simpson Strong-Tie Item #: H1 -

              The Simpson Strong-Tie H1 Hurricane and Seismic Ties are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners - To Rafter: (6) 8d x 1-1/2" Nails or SD9 x 1-1/2" Screws Fasteners - To Double Top Plate: (4) 8d Nails or SD9 x 1-1/2" Screws H1 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...

              Simpson Strong-Tie HL33 Heavy Angle
              Price: $6.18
              Availability: Stock
              Simpson Strong-Tie Item #: HL33 -

                Simpson Strong-Tie HL33 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

                Simpson Strong-Tie L30 Reinforcing Angle
                Price: $0.84
                Availability: Stock
                Simpson Strong-Tie Item #: L30 -

                  The Simpson Strong-Tie L30 Reinforcing Angle are a 3" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L30 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanized Length: 3" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (4) 10d x 1-1/2" Nails or (4) SD #10 x 1-1/2" Screws L30 Information and...

                  Simpson Strong-Tie LS30 Skewable Angles
                  Price: $1.14
                  Availability: Ships Direct
                  Simpson Strong-Tie Item #: LS30 -

                    The Simpson Strong-Tie LS30 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Galvanizing Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" Nails LS30 Information and Installation Instructions Standard...

                    Simpson Strong Tie ML24Z 12 Gauge Angle
                    Price: $1.41
                    Availability: Ships Direct
                    Simpson Strong-Tie Item #: ML23Z -

                      The Simpson Strong-Tie ML23Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (4) SDS25112 Screws Dimensions: 3" Length x 2" (Flange Widths) TML23Z Information and...

                      Simpson Strong-Tie STC Roof Truss Clips
                      Price: $0.42
                      Availability: Stock
                      Simpson Strong-Tie Item #: STC -

                        The Simpson Strong-Tie STC Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. The STC has a single 1-1/2" slot that will permit the truss chord to move vertically when loads are applied to the roof. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STC Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area...

                        Simpson Strong Tie TA9Z-R Staircase Angles
                        Price: $3.47
                        Availability: Stock
                        Simpson Strong-Tie Item #: TA9Z-R -

                          Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x 1-1/2" (Flange Width) TA9Z-R Information and Installation...

                          Simpson VPA2 Variable Pitch Connector
                          Price: $4.61
                          Availability: Ships Direct
                          Simpson Strong-Tie Item #: VPA2 -

                            The Simpson Strong-Tie VPA2 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-1/2" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 1-9/16" Actual Joist Width: 1-1/2"...

                            Simpson Strong-Tie A34 Framing Clip
                            Price: $0.61
                            Availability: Ships Direct
                            Simpson Strong-Tie Item #: A34Z -

                              The Simpson Strong-Tie A34Z ZMax® Framing Clips for wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Finish: ZMax® G-185 Coating Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34Z Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating...

                              Simpson Strong-Tie CJT3ZL Concealed Joist Ties
                              Price: $30.61
                              Availability: Stock
                              Simpson Strong-Tie Item #: CJT3ZL -

                                The Simpson Strong-Tie CJT3ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT3ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 8 Glulam Beam - 5-1/8" x 7-1/2" Material: 12 Gauge Finish:...

                                Simpson Strong-Tie DSC2R-SDS3 Drag Strut Connectors
                                Price: $41.35
                                Availability: Stock
                                Simpson Strong-Tie Item #: DSC2R-SDS3 -

                                  The Simpson Strong-Tie DSC2R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 16" (Length) x 3" (Flanges) Included Fasteners: (20) SDS 1/4" x 3" DSC2R-SDS3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

                                  Simpson Strong-Tie H1 Hurricane Clip
                                  Price: $0.88
                                  Availability: Ships Direct
                                  Simpson Strong-Tie Item #: H1Z -

                                    The Simpson Strong-Tie H1Z Hurricane Ties with ZMax® Corrosion Resistance are designed to provide a secure connection between a 2x rafter and the double top plate at the point where the rafter rests on the plate. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners - To Rafter: (6) 8d x 1-1/2" Nails or SD9 x 1-1/2" Screws Fasteners - To Double Top Plate: (4) 8d Nails or SD9 x 1-1/2" Screws H1Z Information and Installation Instructions. ZMax® Galvanized Coating Information...

                                    Simpson Strong-Tie HL33 Heavy Angle
                                    Price: $8.32
                                    Availability: Ships Direct
                                    Simpson Strong-Tie Item #: HL33HDG -

                                      Simpson Strong-Tie HL33HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized-Level of Corrosion Resistance: Medium Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2)...

                                      Simpson Strong-Tie LS30 Skewable Angles
                                      Price: $1.61
                                      Availability: Ships Direct
                                      Simpson Strong-Tie Item #: LS30Z -

                                        The Simpson Strong-Tie LS30Z Skewable Reinforcing Angles with ZMax® Protective Coating is field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS30Z Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS30Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Zmax® Coating Length: 3-3/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (6) 10d x 1-1/2" Nails LS30Z Information and...

                                        Simpson Strong Tie ML24Z 12 Gauge Angle
                                        Price: $1.77
                                        Availability: Ships Direct
                                        Simpson Strong-Tie Item #: ML24Z -

                                          The Simpson Strong-Tie ML24Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (6) SDS25112 Screws Dimensions: 4" Length x 2" (Flange Widths) TML24Z Information and...

                                          Simpson Strong-Tie RBC Roof Connector
                                          Price: $1.09
                                          Availability: Stock
                                          Simpson Strong-Tie Item #: RBC -

                                            The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard G90 Zinc Fasteners-to-blocking: (6)...

                                            Simpson Strong Tie TA9ZKT Staircase Angles
                                            Price: $10.36
                                            Availability: Ships Direct
                                            Simpson Strong-Tie Item #: TA9ZKT -

                                              Simpson Strong-Tie TA9ZKT Staircase Angle Kit are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: Kit includes two (2) angles with ten (10) SDS25112 Screws Finish: ZMax® coating Material: 12 Gauge Fasteners: SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x 1-1/2" (Flange Width) TA9ZKT Information...

                                              Simpson VPA2 Variable Pitch Connector
                                              Price: $5.39
                                              Availability: Ships Direct
                                              Simpson Strong-Tie Item #: VPA25 -

                                                The Simpson Strong-Tie VPA25 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 1-3/4" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 1-13/16" Actual Joist Width: 1-3/4"...

                                                Simpson Strong-Tie A34SS Framing Clip
                                                Price: $2.70
                                                Availability: Ships Direct
                                                Simpson Strong-Tie Item #: A34SS -

                                                  The Simpson Strong-Tie A34SS Stainless Steel Framing Clips for wood to wood connections at a 90° angle. Stainless Steel material provides excellent corrosion resistance in highly corrosive environments. Length: 2-1/2" Finish: Type 316L Stainless Steel Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" A34SS Information and Installation Instructions Type 316L Connector Stainless Steel Information Type 316L stainless steel is a nickel-chromium austenitic grade of stainless steel with 2-3%...

                                                  Simpson Strong-Tie Clips, Ties and Angles