Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Drive® SDS25500 1/4" x 5" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25500 screw...
The Simpson Strong-Drive® SDS25500 1/4" x 5" structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25500 screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 5" Thread Length: 2-3/4" Serrated Shank Diameter: 1/4" Point Type: Type 17 Point Drive Type:...
The Simpson Strong-Tie THD50400H6SS Type 316 Stainless Steel 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD50400H6SS Type 316 Stainless Steel 1/2" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie TNT18314TF Titen Turbo™ 3/16" x 3-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...
The Simpson Strong-Tie TNT18314TF Titen Turbo™ 3/16" x 3-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...
These 3/4" x 36" zinc plated all thread rods when used with a 3/4" coupling nut can be used for extending machine bolts or any other 3/4" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated...
These 3/4" x 36" zinc plated all thread rods when used with a 3/4" coupling nut can be used for extending machine bolts or any other 3/4" plain or zinc plated treaded rod. A307 Grade 2 Zinc Plated Special lengths available upon request Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments....
These 5/8" x 11" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length...
These 5/8" x 11" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of...
These 5/8" x 8" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary...
These 5/8" x 8" plated lag screws can be used for fastening metal-to-wood or wood-to-wood applications. Pre-drilling is required. Length is measured from the bottom of the hex head and may vary slightly. Zinc Plated Hex Head Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...
The Senco A101509 1-1/2" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There...
The Senco A101509 1-1/2" 23 gauge micro pins are used to fasten the smallest of decorative trim securely and leave a nearly invisible hole saving you wasted time with splitting or puttying. There are 2,600 nails in the package. Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from our warehouse or our vendor's warehouse. If we or our vendor are out of stock or do not have enough inventory to complete your order we will...
The Simpson S15N250SFB 2-1/2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The...
The Simpson S15N250SFB 2-1/2" x 15ga. Angled Type 304 Stainless Steel Finish Nails should be used in exterior applications where highly corrosive conditions exist like seaside envoronments. The D-style head has greater bearing area to draw trim to the substrate. DA Style Finish Nails Fit the Following Tools: (Please check your owners manual regarding the proper lengths that your tool can use) Senco: FinishPro42XP, FinishPro41XP, FinishPro35, SFN40, SFN30, SFN1, SFN2B, SN1...
Simpson Strong Drive® SSA10DB 3" x .148" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as...
Simpson Strong Drive® SSA10DB 3" x .148" Type 316 Ring Shank Stainless Steel nails are mostly used used in stainless steel angle clips and straps to reach the load values that are required as well as protection from corrosive conditions. There are approximately 1250 nails in the 25 lb. bucket. The nails are type 316 stainless steel providing high/severe corrosion protection. SSNA10DB Information and Data Type 316 Fastener Stainless Steel Information Type 316 stainless steel is a nickel...
The Simpson Strong-Tie Deck Drive™ DSVG3S #10 x 3" Gray Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start...
The Simpson Strong-Tie Deck Drive™ DSVG3S #10 x 3" Gray Collated Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSVG3S is ideally suited to be driven using a PRO300S Quik Drive® Auto Feed Screw Gun. This screw is easily countersunk into today’s wood deck boards giving it a nice finished look. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber so...
The THD50300H 1/2" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...
The THD50300H 1/2" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...
The Simpson Strong-Tie THD50500H4SS Type 304 Stainless Steel 1/2" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD50500H4SS Type 304 Stainless Steel 1/2" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson Strong-Tie TNT25314H Titen Turbo™ 1/4" x 3-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT25314H Titen Turbo™ 1/4" x 3-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...
BP100HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot...
BP100HDG Hot Dipped Galvanized Square Bearing Plates give greater bearing surface than standard cut washers, and help distribute the load at these critical connections. These bearing plates are hot dipped galvanized to protect the washer from corrosion when exposed to the elements as well as coming in contact with ACQ lumber. Hole Size: 1-1/16" Dimension: 3-1/2" x 3-1/2" Thickness: 3/8" Coating: Hot Dipped Galvanized Mild Steel Imported Picture may not match product exactly Hot Dipped...
These 3/4" x 36" hot dipped galvanized all thread rods when used with a 3/4" HDG coupling nut can be used for extending HDG machine bolts and HDG all thread rod. They can also sometimes be used as...
These 3/4" x 36" hot dipped galvanized all thread rods when used with a 3/4" HDG coupling nut can be used for extending HDG machine bolts and HDG all thread rod. They can also sometimes be used as an anchor bolt substitution (Consult your structural engineer first). Hot dipped galvanizing provides extra protection when contacting ACQ lumber. Please Note: This all thread is cut in our own shop. Bare ends are painted with galvanizing spray paint. A307 Grade 2 Hot Dipped Galvanized Special...
These 5/8" x 12" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length...
These 5/8" x 12" hex head plated machine bolts can be used for various wood-to-wood and/or metal-to-wood connection. Grade 2 ASTM A307 Zinc Plated Hex Head Uses 15/16" Socket Imported Thread Length May Not Match Picture Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and should be used in dry environments. Level of...