Simpson Strong-Tie Wedge Form Ties

Questions?
Call Our Employee Owner
Sales Department Direct
800-323-2999

Simpson Strong-Tie Wedge Tie Form System

The Simpson Strong-Tie Wedge Tie (WT) is a form tie that secures concrete forms in place while the concrete is poured. It easily installs between form boards and accurately spaces the forms. Several models are available for varying wall thickness and types of form boards. The spacing of the wedge ties along the length of the form depends on the depth of the wedge tie in the form. The spacing does not depend on the thickness of the wall. The maximum recommended spacing for Simpson Strong-Tie Wedge Ties used with 1x, 2x and 1-1/4" thick forms is outlined in the Simpson Wedge Tie Technical Bulletin. The tables give spacing guidelines for various form heights and types of form boards. In general, the higher the form is, the closer the spacing of the WTs should be.

WT6 Wedge Form Ties (250/Box)
More Information

Price: $174.29

Availability: Stock

Simpson Strong-Tie Item #: WT6 -

The Simpson Strong-Tie WT-6 Wedge Form Ties are designed for low foundation wall applications with a 6" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 6". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If there...

WT8 Wedge Form Ties (250/Box)
More Information

Price: $182.50

Availability: Stock

Simpson Strong-Tie Item #: WT8 -

The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 8". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If there...

WT10 Wedge Form Ties (250/Box)
More Information

Price: $215.00

Availability: Stock

Simpson Strong-Tie Item #: WT10 -

The Simpson Strong-Tie WT-10 Wedge Form Ties are designed for low foundation wall applications with a 10" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 10". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If...

WT12 Wedge Form Ties (250/Box)
More Information

Price: $259.29

Availability: Stock

Simpson Strong-Tie Item #: WT12 -

The Simpson Strong-Tie WT-12 Wedge Form Ties are designed for low foundation wall applications with a 12" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 12". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Additional Simpson Strong-Tie Information If...

W1 Simpson Strong-Tie Wedges for Form Ties

W1 Wedges for Form Ties (500/Box)
More Information

Price: $170.71

Availability: Stock

Simpson Strong-Tie Item #: W1 -

Simpson Strong Tie W1 Wedges are designed to be used with the Simpson Wedge Form Ties when forming low foundation walls. Two (2) W1 wedges are required for each wedge form tie used. Refer to technical bulletin T-WT for recommended spacing. Additional Simpson Strong-Tie Information If there are any items on the Simpson Strong-Tie Website that you do not see on the DHC Supplies website we will gladly special order them. Most special order Simpson items ship the same or next business day as long...