Simpson Strong-Tie

The Simpson Strong-Tie HU210-3TF is a hybrid 2 x 10-3 triple hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features...

The Simpson Strong-Tie HU210-3TF is a hybrid 2 x 10-3 triple hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 4-11/16" (Wide) x 9-1/8" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top...

Save by Purchasing a Quantity of 400 SSTB20L Bolts! The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall...

Save by Purchasing a Quantity of 400 SSTB20L Bolts! The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum...

The Simpson Strong-Tie HTS16 14ga. x 16" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a...

The Simpson Strong-Tie HTS16 14ga. x 16" Heavy Twist Strap provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The HTS16 has a small bend section to reduce interference at the transition points between the two members. HTS straps do not need to be wrapped over the truss to achieve the allowable load. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 16" (Length) Fasteners:...

The Simpson Strong-Tie SP2 Stud Plate Tie is designed for double-top-plate-to-stud connection to resist uplift. The SP2 stud plate ties features angled holes for a positive connection from the stud...

The Simpson Strong-Tie SP2 Stud Plate Tie is designed for double-top-plate-to-stud connection to resist uplift. The SP2 stud plate ties features angled holes for a positive connection from the stud to the plates. Features embossments that strengthen the stud-to-plate connection Designed to resist wind and seismic forces Can be used before or after installation including in retrofit applications Material: 20 Gauge Finish: Standard G90 Zinc Fastener: (6) .148 x 3" Nails (Stud) (6) .148 x 3"...

The Simpson Strong-Tie RTC22Z ZMax® Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 2x horizontal members at a corner to a vertical 2 x 2 wood post....

The Simpson Strong-Tie RTC22Z ZMax® Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 2x horizontal members at a corner to a vertical 2 x 2 wood post. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized...

The Simpson Strong Tie GH48-8/3 Girder Hangers is used to connect a 4 x 8 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if...

The Simpson Strong Tie GH48-8/3 Girder Hangers is used to connect a 4 x 8 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 4-5/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-8/3 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...

The Simpson Strong-Tie THD37500H6SS Type 316 Stainless Steel 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD37500H6SS Type 316 Stainless Steel 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

Simpson Strong-Tie CNW7/8-7/8-OST coupling nuts are a tested and load rated method to join 7/8" Hot Dipped Galvanized threaded rod or anchor bolts to 7/8" standard rod extensions. The "witness"...

Simpson Strong-Tie CNW7/8-7/8-OST coupling nuts are a tested and load rated method to join 7/8" Hot Dipped Galvanized threaded rod or anchor bolts to 7/8" standard rod extensions. The "witness" holes in the nut provide a means to visually verify when rods are properly installed. The positive stop feature helps ensure even threading into each end of the nut. CNW7/8-7/8-OST meet and exceed the capacity of corresponding ASTM A36 bolts and threaded rod. CNW7/8-7/8-OST Information and Data Standard...

Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked...

Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked concrete at elevated temperatures. SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths. SET-3G dispenses as a 1:1 ratio in two-component producing a high-strength, epoxy-based anchoring...

Simpson Strong-Tie Outdoor Accents® APST612 Flat Straps bring decorative appeal and with structural strength to any outdoor living space like patio covers, gazebos and more. The APST612 flat...

Simpson Strong-Tie Outdoor Accents® APST612 Flat Straps bring decorative appeal and with structural strength to any outdoor living space like patio covers, gazebos and more. The APST612 flat strap works for 4x lumber in both nominal and rough sizes. It can be used to connect two 6x beams together or add to any project as a decorative accent. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and...

The Simpson Strong-Tie PAB5-18 5/8" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB5-18 5/8" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong-Tie TA10SS Stainless Steel Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10SS...

Simpson Strong-Tie TA10SS Stainless Steel Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10SS angles are easily installed with (7) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: Type 316L Stainless Steel Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (3) Stringer, (4) Tread (Max) SDS25112 Screws - (4) Stringer, (3) Tread...

The Simpson Strong-Drive® SDS25300SS-R25 1/4" x 3" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications....

The Simpson Strong-Drive® SDS25300SS-R25 1/4" x 3" stainless steel structural screw is a 1/4" diameter wood screw ideal for various connector installations as well as wood-to-wood applications. The SDS25300SS-R25 stainless steel screw installs with no pre-drilling and has been extensively tested in various applications. SDS screws feature a patented new easy driving 4CUT tip and a corrosion resistant double-barrier coating. Overall Length: 3" Thread Length: 2" Serrated Shank Diameter: 1/4"...

The Simpson Strong-Tie APVDJT1.75-6 Avant Outdoor Accents Deck Joist Tie attaches 1-3/4" beams to the side of 6x or larger support posts. It installs quickly and easily with the Outdoor Accents...

The Simpson Strong-Tie APVDJT1.75-6 Avant Outdoor Accents Deck Joist Tie attaches 1-3/4" beams to the side of 6x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. The Avant Collection features straight edges and chamfered corners for a clean, timeless design. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood...

Simpson Strong-Tie Avant Outdoor Accents® APVB66 post bases secure a 6 x 6 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported...

Simpson Strong-Tie Avant Outdoor Accents® APVB66 post bases secure a 6 x 6 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature a clean, simple design and provide ZMAX® galvanization with black powder coat for extra corrosion resistance. APVB66 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. The Avant Collection features straight edges and...

The THD37400H 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...

The THD37400H 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...

Simpson Strong-Tie PDPAWL-250 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...

Simpson Strong-Tie PDPAWL-250 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 2-1/2" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...

Simpson Strong-Tie HL43 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL43 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a Hot Dipped Galvanized as a special order.  Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 3" (L) Bend...

The Simpson Strong-Tie ABU88Z ZMax® is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88 features 1" standoff height...

The Simpson Strong-Tie ABU88Z ZMax® is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88 features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 14 Gauge Strap Material: 12 Gauge Dimensions: (W) 7-1/2" x (L) 7" x (H) 7"...

The Simpson Strong-Tie L90 Reinforcing Angle is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The...

The Simpson Strong-Tie L90 Reinforcing Angle is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L90 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanized Length: 9" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (10) 10d x 1-1/2" Nails or (10) SD #10 x 1-1/2" Screws L90 Information and...

Simpson Strong-Tie CC5 1/4-6 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 6x post. CC5 1/4-6 Column Caps should be used when the 5-1/8" beam extends through the...

Simpson Strong-Tie CC5 1/4-6 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 6x post. CC5 1/4-6 Column Caps should be used when the 5-1/8" beam extends through the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 5-1/2"...

Simpson Strong-Tie ECCO7 End Column Caps with no straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The ECCO7 End Column Caps comes with no coating to allow you...

Simpson Strong-Tie ECCO7 End Column Caps with no straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The ECCO7 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 6-7/8" (Beam) x...

Simpson Strong Tie LUS26-2Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS26-2Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26-2Z Double 2 x 6 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/8" (Wide) x 4-7/8" (Height)...

Simpson Strong Tie HGUS3.25/12 3-1/8" Wide Glulam Hangers features double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12...

Simpson Strong Tie HGUS3.25/12 3-1/8" Wide Glulam Hangers features double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (Wide) x 10-5/8" (Height) x 4" (Seat Depth) Fastener Options: (56) 16d Nails (Header) (20) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS3.25/12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...