Skew and Slope Hangers

The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes...

The Simpson Strong-Tie LSSJ26LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie LSSR1.81Z Slopeable and Skewable Rafter Hanger allows you to install a 1-3/4" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...

The Simpson Strong-Tie LSSR1.81Z Slopeable and Skewable Rafter Hanger allows you to install a 1-3/4" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 4-1/8" (Flange Width) x 8-15/16" (Height) x 1-13/16" (Joist Width) Fastener...

The Simpson Strong-Tie SUL24 Skewed Left 2 x 4 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...

The Simpson Strong-Tie SUL24 Skewed Left 2 x 4 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) .162 x 3-1/2" 16d Nails (Face) (4) .148 x 1-1/2" 10d...

The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes...

The Simpson Strong-Tie LSSJ26RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 6 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ26RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie LSSR26Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 6 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...

The Simpson Strong-Tie LSSR26Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 6 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 2-1/2" (Flange Width) x 5-3/8" (Height) x 1-9/16" (Joist Width) Fastener Options:...

The Simpson Strong-Tie SUR24 Skewed Right 2 x 4 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...

The Simpson Strong-Tie SUR24 Skewed Right 2 x 4 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 4 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/2" (Height) x 1-1/8" (Outside Flange) x 1-1/4" (Inside Flange) Fastener Options : (4) .162" x 3-1/2" 16d Nails (Face) (4) .148" x 1-1/2"...

The Simpson Strong-Tie LSSJ28LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes...

The Simpson Strong-Tie LSSJ28LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ28LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie LSSR28Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 8 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...

The Simpson Strong-Tie LSSR28Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 8 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 2-1/2" (Flange Width) x 7-1/8" (Height) x 1-9/16" (Joist Width) Fastener Options:...

The Simpson Strong-Tie LSSJ28RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes...

The Simpson Strong-Tie LSSJ28RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 8 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ28RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter conditions,...

The Simpson Strong-Tie LSSR210Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 10 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...

The Simpson Strong-Tie LSSR210Z Slopeable and Skewable Rafter Hanger allows you to install a nominal 2 x 10 rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 2-1/2" (Flange Width) x 9-1/8" (Height) x 1-9/16" (Joist Width) Fastener...

The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...

The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) .162" x 3-1/2" 16d Nails (Face) (6) .148" x 1-1/2"...

The Simpson Strong-Tie LSSJ210LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the left. Its simple design...

The Simpson Strong-Tie LSSJ210LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ210LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter...

The Simpson Strong-Tie SUL26Z Skewed Left 2 x 6/8 joist hangers with ZMax® coating are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will...

The Simpson Strong-Tie SUL26Z Skewed Left 2 x 6/8 joist hangers with ZMax® coating are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. ZMax coating provides additional corrosion protection when required. Material: 16 gauge Finish: ZMax® G-185 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x...

The Simpson Strong-Tie LSSJ210RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the right. Its simple design...

The Simpson Strong-Tie LSSJ210RZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the right. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ210RZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter...

The Simpson Strong-Tie LSSR2.1Z Slopeable and Skewable Rafter Hanger allows you to install either a 2" or 2-1/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This...

The Simpson Strong-Tie LSSR2.1Z Slopeable and Skewable Rafter Hanger allows you to install either a 2" or 2-1/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 4-1/8" (Flange Width) x 8-15/16" (Height) x 2-1/8" (Joist Width)...

The Simpson Strong-Tie SUL26SS Type 316L Stainless Steel Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will...

The Simpson Strong-Tie SUL26SS Type 316L Stainless Steel Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Stainless Steel provides additional corrosion protection when required. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside...