Login/Register
Shopping Cart
OR
Simpson Strong-Tie PDPAWL-225 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin...
Simpson Strong-Tie PDPAWL-225 Zinc Plated Pin is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1″ washer that provides additional bearing surface for enhanced upload resistance. Length: 2-1/4" Head Diameter: .300" Shank Diameter: .157" Coating: Standard G90 Zinc PDPAWL Series Fasteners Tension and Shear Loads in Normal Weight Concrete PAT Fastener MSDS Standard G90 Zinc...
The Simpson Strong-Tie TNT18214TF Titen Turbo™ 3/16" x 2-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the...
The Simpson Strong-Tie TNT18214TF Titen Turbo™ 3/16" x 2-1/4" 6-Lobe Flat Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping...
Simpson Strong-Tie ECCLLQ444SDS End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x...
Simpson Strong-Tie ECCLLQ444SDS End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444SDS Information and Installation Instructions....
The Simpson Strong-Tie LSSR210-2Z Slopeable and Skewable Rafter Hanger allows you to install a 3" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...
The Simpson Strong-Tie LSSR210-2Z Slopeable and Skewable Rafter Hanger allows you to install a 3" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 5-1/8" (Flange Width) x 8-15/16" (Height) x 3-1/8" (Joist Width) Fastener Options:...
Simpson Strong-Tie CB48 column bases are used to provide a connection of a 4 x 8 (3-1/2" x 7-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7...
Simpson Strong-Tie CB48 column bases are used to provide a connection of a 4 x 8 (3-1/2" x 7-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 7-1/2") Fasteners: (2) 5/8" Machine Bolts CB48 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
Simpson Strong Tie HUCQ210-3SS-SDS Stainless Steel 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-3SS-SDS hangers...
Simpson Strong Tie HUCQ210-3SS-SDS Stainless Steel 4-5/8" Wide Triple 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-3SS-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Type 316L Stainless Steel Dimensions: 4-5/8" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4"...
Simpson Strong Tie face mount HU2.1/11 I-Joist Hanger is designed for hanging 2-1/16" x 11-7/8" I Joist. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 2-1/8" (Wide) x 11-7/8"...
Simpson Strong Tie face mount HU2.1/11 I-Joist Hanger is designed for hanging 2-1/16" x 11-7/8" I Joist. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 2-1/8" (Wide) x 11-7/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (16) .162" x 3-1/2" Nails (Header) (6) .148" x 1-1/2" Nails (Joist) HU2.1/11 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of...
The Simpson Strong-Tie THD37500H4SS Type 304 Stainless Steel 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...
The Simpson Strong-Tie THD37500H4SS Type 304 Stainless Steel 3/8" x 5" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...
The Simpson MIU2.37/11 hanger is designed to hang 2-5/16" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/11 features...
The Simpson MIU2.37/11 hanger is designed to hang 2-5/16" x 11-7/8" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/11 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie BA1.81/16 Top Flange Hanger is designed for 1-3/4" x 16" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA1.81/16 Top Flange Hanger is designed for 1-3/4" x 16" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top flanges...
Simpson Strong-Tie CCOQ6-SDS2.5 Weld-On Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The...
Simpson Strong-Tie CCOQ6-SDS2.5 Weld-On Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The column cap features a design without legs, enabling a field-welded attachment to steel columns and beams. The seat of the column cap provides additional surface area for bearing that extends beyond the side of the column. This helps distribute the load from the beam and provide support for the...
The Simpson Strong-Tie ETB100S 1" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to...
The Simpson Strong-Tie ETB100S 1" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to permit proper hole cleaning with fewer brush strokes at embedments up to 20 times the anchor diameter. Useable Length: 5" Hole Size: 1" Anchor Diameter 7/8" Rebar Size #7 Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either from...
Simpson Strong-Tie MSTA18SS Type 316L Stainless Steel 18-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be...
Simpson Strong-Tie MSTA18SS Type 316L Stainless Steel 18-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Tyle 316L Stainless Steel Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: (14) 10d...
The Simpson Strong-Tie ETB112S 1-1/8" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives...
The Simpson Strong-Tie ETB112S 1-1/8" Wire Brush is part of the Simpson wire brush system that is specifically designed for use with Simpson Strong-Tie® SET-3G™ and AT-3G™ adhesives to permit proper hole cleaning with fewer brush strokes at embedments up to 20 times the anchor diameter. Useable Length: 5" Hole Size: 1-1/8" Anchor Diameter 1" Rebar Size #8 Explanation of "Stock" Availability Term Stock items are products we normally have available for immediate shipment either...
The THD37212CS6SS 3/8" x 2-1/2" Type 316 Stainless Steel Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring...
The THD37212CS6SS 3/8" x 2-1/2" Type 316 Stainless Steel Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile....
Simpson Strong-Tie ECCLLQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson...
Simpson Strong-Tie ECCLLQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444HDG Information and...
The Simpson MIU2.37/14 hanger is designed to hang 2-5/16" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/14 features...
The Simpson MIU2.37/14 hanger is designed to hang 2-5/16" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU2.37/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/11.88 is used to install 2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS2.06/11.88 is used to install 2" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS2.06/11.88 Information and Installation...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2"...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie ITS2.06/9.5 sets a new standard for engineered wood top flange hangers. The ITS2.06/9.5 installs 2" or 2-1/16" x 9-1/2" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from...
Save by Purchasing a Quantity of 24 Boxes (2400 Pieces)! Simpson Strong-Tie LU28 2 x 8 Joist Hangers are an economical and time saving solution to securely installing 2 x 8 joists to a wood ledger...
Save by Purchasing a Quantity of 24 Boxes (2400 Pieces)! Simpson Strong-Tie LU28 2 x 8 Joist Hangers are an economical and time saving solution to securely installing 2 x 8 joists to a wood ledger or beam. You can install LU28 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. LU28 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...
The Simpson Strong-Tie LSSR410Z Slopeable and Skewable Rafter Hanger allows you to install a 3-1/2" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...
The Simpson Strong-Tie LSSR410Z Slopeable and Skewable Rafter Hanger allows you to install a 3-1/2" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 5-1/8" (Flange Width) x 8-15/16" (Height) x 3-9/16" (Joist Width) Fastener Options:...
Simpson Strong-Tie ECCQ46-SDS2.5HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x beam and a 6x post. ECCQ46-SDS2.5 End Column Caps should be used when the...
Simpson Strong-Tie ECCQ46-SDS2.5HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x beam and a 6x post. ECCQ46-SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ46SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-5/8" (Beam) x 5-1/2" (Post) x 8-1/2" (Length)...
The Simpson Strong-Tie BC6R Rough Post Caps allow you to create a light duty connection between a 6 x 6 rough post and 6x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 6" (W) x 6"...
The Simpson Strong-Tie BC6R Rough Post Caps allow you to create a light duty connection between a 6 x 6 rough post and 6x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 6" (W) x 6" (L) Fastener Options: (24) 16d BC6R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance...
The Simpson Strong-Tie TNT25214H Titen Turbo™ 1/4" x 2-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of...
The Simpson Strong-Tie TNT25214H Titen Turbo™ 1/4" x 2-1/4" Hex Head Screw Anchor is fast and easy to install, and incredibly reliable in its performance. The secret behind the performance of the Titen Turbo™ lies in a thread design that lowers driving torque while providing superior holding power. The revolutionary Torque Reduction Channel between the threads gives drilling dust a place to go, thereby significantly reducing torque-related issues like binding, stripping and...