Login/Register
Shopping Cart
OR
Simpson Strong-Tie AT3G10 Epoxy is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications,...
Simpson Strong-Tie AT3G10 Epoxy is a hybrid, acrylic-based adhesive for anchoring threaded rod and rebar into cracked and uncracked concrete. Ideal for cold weather and wet concrete applications, AT-3G dispenses easily and offers a fast curing time for same-day bolt up. It can be specified for a wide range of in-service temperatures, and maintains its strong bond strength in extreme environments for ultimate design and jobsite flexibility. Tested and code compliant with the IBC and IRC, AT-3G...
The Simpson Strong-Tie® Titen Turbo™ installation kit makes installation of these concrete and masonry screw anchors quick and easy. Accessories are compatible with standard quick-release...
The Simpson Strong-Tie® Titen Turbo™ installation kit makes installation of these concrete and masonry screw anchors quick and easy. Accessories are compatible with standard quick-release or three-jaw style chucks. The sockets have been designed to prevent over-torquing, which can lead to fastener failure. The kit comes with a convenient zipper-close canvas bag for easy storage of installation-kit parts and Titen Turbo screw anchors. 6-Piece Kit Includes: 6-lobe bit socket T25 and...
Simpson Strong Tie HUS1.81/10 1-3/4" x 9" Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie HUS1.81/10 1-3/4" x 9" Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-13/16" (Wide) x 8-7/8" (Height) x 3" (Seat Depth) Fastener Options: (30) 16d Nails or SD10212 Screws(Header) (10) 16d Nails...
Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie HUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS26 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 3" (Seat Depth)...
Simpson Strong Tie HGUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge...
Simpson Strong Tie HGUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-5/8" (Wide) x 5-3/8" (Height) x 5" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed HGUS26 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90...
Simpson Strong Tie U24 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16...
Simpson Strong Tie U24 2 x 4 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (4) .162" x 3-1/2" 16d Nails (Header) (2) .148" x 1-1/2" 10d Nails (Joist) U24 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie HU24-2 Double 2 x 4 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU24-2 Double 2 x 4 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 3-1/16" (Height) x 2-1/2" (Seat Depth) Fastener Options: (4) .162 x 3-1/2" (16d) Nails (Header) (2) .148 x 3" (10d) Nails (Joist) HU24-2 Information and...
Simpson Strong Tie HUCQ1.81/9-SDS 1-3/4" Wide x 9" Heavy Duty Composite Lumber Hangers come with the required SDS screws to reach the load values you require. HUCQ1.81/9-SDS hangers with concealed...
Simpson Strong Tie HUCQ1.81/9-SDS 1-3/4" Wide x 9" Heavy Duty Composite Lumber Hangers come with the required SDS screws to reach the load values you require. HUCQ1.81/9-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (8) SDS 1/4" x 1-3/4" Screws (Header) (4) SDS 1/4" x 1-3/4" Screws...
Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various...
Simpson Strong-Tie HTU26 2 x 6 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU26 hanger very versatile for various trusses. Additionally you can have the HTU26 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per ASTM...
Simpson Strong-Tie IUS1.81/9.5 is used to install 1-3/4" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...
Simpson Strong-Tie IUS1.81/9.5 is used to install 1-3/4" x 9-1/2" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 9-1/2" (Height) x 2" (Seat Depth) Fastener Options : (8) .148 x 3" Nails (Face) IUS1.81/9.5 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load...
Simpson Strong Tie face mount HU1.81/5 Composite Lumber Hanger is designed for hanging 1-3/4" x 5-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (12) 16d Nails (Header-Min) (4) 10d Nails (Joist-Min) (16) 16d Nails (Header-Max) (6) 10d Nails (Joist-Max) HU1.81/5 Information and Installation...
The Simpson MIU1.81/9.5 hanger is designed to hang 1-3/4" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/9.5 features...
The Simpson MIU1.81/9.5 hanger is designed to hang 1-3/4" x 9-1/2" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/9.5 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
Simpson Strong-Tie HD3B Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other lateral applications. The...
Simpson Strong-Tie HD3B Holdowns are a light duty bracket that is designed for a variety of uses including but not limited to shearwalls, braced-wall panels and other lateral applications. The holdown must be attached to the receiving member with 5/8" machine bolts. A minimum wood member thickness of 1-1/2" is required to reach the least allowable tension load. The bottom stud hole is 4-3/4" above the plate line so you can install the holdown flush with the plate without weakening the post or...
The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8 greatly minimizes deflection under load. (20) 3" SDS...
The Simpson Strong-Tie HDQ8-SDS3 holdown combines low deflection and high loads with ease of installation. The unique seat design of the HDQ8 greatly minimizes deflection under load. (20) 3" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Material: 7 Gauge Steel...
The S/HDU4 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU4 holdown...
The S/HDU4 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU4 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 5/8" Fasteners (Not Included): (6) #14 Screws...
The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...
The Simpson PB44 Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Common Nails PB44 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....
Simpson Strong-Tie PBS44AZ Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay...
Simpson Strong-Tie PBS44AZ Standoff Post Bases are used to connect a 4 x 4 (3-1/2" x 3-1/2") to a concrete slab. The 1" standoff keeps the post off the concrete which reduces the chance of decay over time. ZMax® coating provides additional protection from the weather elements. Finish: ZMax® Base Material: 12 Gauge Base Dimensions: 3-9/16" x 3-1/2" Strap Material: 14 Gauge Strap Height: 6-1/4" Fastener Options: (14) 16d (2) 1/2" Machine Bolts Additional PBS44AZ information and...
Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7...
Simpson Strong-Tie CB44 column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Galvanized Steel Base Material: 7 Ga Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...
The Simpson CBSQ44-SDS2 (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x 3-1/2") Strap: 10 Ga. x 2-1/4" Wide x 8-3/8" High CBSQ44 Information and Installation...
The new patent-pending Simpson Strong-Tie® MPB44Z is the first post base specifically designed to provide moment resistance for 4 X 4 columns or posts. An innovative overlapping sleeve design...
The new patent-pending Simpson Strong-Tie® MPB44Z is the first post base specifically designed to provide moment resistance for 4 X 4 columns or posts. An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base. The MPB44Z is ideal for outdoor structures, such as carports, fences and decks. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly. Additionally, the MPB44Z...
Simpson Strong-Tie EPB44A allows you to install an elevated 4 x 4 post base 2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any...
Simpson Strong-Tie EPB44A allows you to install an elevated 4 x 4 post base 2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Standard G90 Galvanized Material: 14 Gauge Base Size: 3-9/16" x 3" x 2-3/8"...
The Simpson Strong-Tie DTT1Z Deck Tension Tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie...
The Simpson Strong-Tie DTT1Z Deck Tension Tie provides a less invasive approach for attaching a new deck to a home or retrofitting an existing deck to current code standards. This tension tie addresses a 2015 International Residential Code provision (section R507.2.4) that now allows four 750 lb. lateral connectors to be fastened to framing in the house with a lag screw. This provision is an alternative to using two 1,500 lb. lateral connections from the deck to the floor joists within the...
The Simpson Strong-Tie ABW44Z for 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete...
The Simpson Strong-Tie ABW44Z for 4x4 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW44Z allows...
The Simpson Strong-Tie ABU44Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44Z...
The Simpson Strong-Tie ABU44Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44Z features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 16 Gauge Strap Material: 12 Gauge Dimensions: (W)...