Login/Register
Shopping Cart
OR
The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the...
The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc Width: 2-1/2" Length: 12-3/8" Anchor Bolt: 5/8" Fastener...
Simpson Strong-Tie HDU5-SDS2.5HDG Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson...
Simpson Strong-Tie HDU5-SDS2.5HDG Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in either exterior or in...
The Simpson Strong-Tie ABU88Z ZMax® is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88 features 1" standoff height...
The Simpson Strong-Tie ABU88Z ZMax® is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88 features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 14 Gauge Strap Material: 12 Gauge Dimensions: (W) 7-1/2" x (L) 7" x (H) 7"...
The Simpson Strong-Tie L90 Reinforcing Angle is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The...
The Simpson Strong-Tie L90 Reinforcing Angle is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L90 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanized Length: 9" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (10) 10d x 1-1/2" Nails or (10) SD #10 x 1-1/2" Screws L90 Information and...
Simpson Strong-Tie CC5 1/4-6 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 6x post. CC5 1/4-6 Column Caps should be used when the 5-1/8" beam extends through the...
Simpson Strong-Tie CC5 1/4-6 Column Caps provide a high capacity connection between a 5-1/8" GluLam beam and a 6x post. CC5 1/4-6 Column Caps should be used when the 5-1/8" beam extends through the 6x post. Please Note: This column cap is also available in powder coat, Hot Dipped Galvanized and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 5-1/2"...
The Simpson Strong-Tie BC6R Rough Post Caps allow you to create a light duty connection between a 6 x 6 rough post and 6x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 6" (W) x 6"...
The Simpson Strong-Tie BC6R Rough Post Caps allow you to create a light duty connection between a 6 x 6 rough post and 6x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 6" (W) x 6" (L) Fastener Options: (24) 16d BC6R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance...
Simpson Strong-Tie ECCO7 End Column Caps with no straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The ECCO7 End Column Caps comes with no coating to allow you...
Simpson Strong-Tie ECCO7 End Column Caps with no straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The ECCO7 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 6-7/8" (Beam) x...
Simpson Strong-Tie ECCQ46-SDS2.5HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x beam and a 6x post. ECCQ46-SDS2.5 End Column Caps should be used when the...
Simpson Strong-Tie ECCQ46-SDS2.5HDG Hot Dipped Galvanized End Column Caps provide a high capacity connection between a 4x beam and a 6x post. ECCQ46-SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ46SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-5/8" (Beam) x 5-1/2" (Post) x 8-1/2" (Length)...
Simpson Strong-Tie ST6224 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of...
Simpson Strong-Tie ST6224 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 23-5/16" (Length) Fastener Options: (28) 16d Nails (28) SD10 x 1-1/2" Screws ST6224 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie MSTA21 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x...
Simpson Strong-Tie MSTA21 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 21" (Length) Fasteners: (16) 10d Nails (16) SD9 x 1-1/2" Screws...
Simpson Strong-Tie ECCLLQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson...
Simpson Strong-Tie ECCLLQ444HDG Hot Dipped Galvanized End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 4 posts when both beams end at the post. Install Simpson Strong-Tie SDS 1/4" x 2-1/2" wood screws, which are provided, in all round holes. (Lag screws will not achieve the same load.) Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 3-1/2" (Beams) x 3-1/2" (Posts) Included Fasteners: 1/4" x 2-1/2" SDS Screws (Included) ECCLLQ444HDG Information and...
Simpson Strong Tie LUS26-2Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...
Simpson Strong Tie LUS26-2Z ZMax® 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26-2Z Double 2 x 6 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/8" (Wide) x 4-7/8" (Height)...
Save by Purchasing a Quantity of 24 Boxes (2400 Pieces)! Simpson Strong-Tie LU28 2 x 8 Joist Hangers are an economical and time saving solution to securely installing 2 x 8 joists to a wood ledger...
Save by Purchasing a Quantity of 24 Boxes (2400 Pieces)! Simpson Strong-Tie LU28 2 x 8 Joist Hangers are an economical and time saving solution to securely installing 2 x 8 joists to a wood ledger or beam. You can install LU28 hangers with with 10d or 16d nails depending on the load value you are trying to achieve. LU28 joist hangers are also approved for installation with Simpson Strong-Tie SD Structural Connector Screws. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...
Simpson Strong Tie U210 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....
Simpson Strong Tie U210 2 x 10/12 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 7-13/16" (Height) x 2" (Seat Depth) Fastener Options: (10) .162" x 3-1/2" 16d Nails (Header) (6) .148" x 1-1/2" 10d Nails (Joist) U210 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...
Simpson Strong Tie LUS26-2SS Type 316L Stainless Steel 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...
Simpson Strong Tie LUS26-2SS Type 316L Stainless Steel 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26-2SS Double 2 x 6 Hangers are also approved for installation with SD10 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions: 3-1/8" (Wide) x...
Simpson Strong-Tie LU28R-18 rough 2 x 8 Joist Hangers are an economical and time saving solution to securely installing rough 2 x 8 joists to a wood ledger or beam. You can install LU28R-18 hangers...
Simpson Strong-Tie LU28R-18 rough 2 x 8 Joist Hangers are an economical and time saving solution to securely installing rough 2 x 8 joists to a wood ledger or beam. You can install LU28R-18 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 2" (Wide) x 6-3/8" (Height) x 1-1/2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" 16d Nails (Header) (6) .148 x 1-1/2" 10d...
Simpson Strong-Tie ST6236 14-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of...
Simpson Strong-Tie ST6236 14-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 33-13/16" (Length) Fastener Options: (40) 16d Nails (40) SD10 x 1-1/2" Screws ST6236 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
Simpson Strong-Tie MSTA21Z ZMax® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of...
Simpson Strong-Tie MSTA21Z ZMax® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: ZMax® G185 Galvanized Dimensions: 1-1/4" (Wide) x 21" (Length) Fasteners: (16) 10d Nails (16) SD9 x...
Simpson Strong-Tie CCQ46-SDS2.5HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x beam and a 6x post. CCQ46SDS2.5 Column Caps should be used when the beam extends...
Simpson Strong-Tie CCQ46-SDS2.5HDG Hot Dipped Galvanized Column Caps provide a high capacity connection between a 4x beam and a 6x post. CCQ46SDS2.5 Column Caps should be used when the beam extends through the post. Each CCQ46SDS2.5 Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Stainless Steel as a special order. Please call our sales department...
Simpson Strong-Tie CCO7 End Column Caps with no post straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The CCO7 Column Caps comes with no coating to allow you...
Simpson Strong-Tie CCO7 End Column Caps with no post straps provides a high capacity connection between a 6-3/4" wide beam and a steel post. The CCO7 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 3 gauge Finish: No Coating Dimensions: 6-7/8" (Beam) x 13"...
Simpson Strong-Tie ECC5 1/4-8 End Column Caps provide a high capacity connection between a 5-1/8" Glulam beam and a 8x post. ECC5 1/4-8 End Column Caps should be used when the 5-1/8" beam ends at...
Simpson Strong-Tie ECC5 1/4-8 End Column Caps provide a high capacity connection between a 5-1/8" Glulam beam and a 8x post. ECC5 1/4-8 End Column Caps should be used when the 5-1/8" beam ends at the 6x post. Please Note: This column cap is also available in powder coat or Hot Dipped Galvanized as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 5-1/4" (Beam) x 7-1/2" (Post) x 9-1/2" (Length)...
The Simpson Strong-Tie ABU88HDG Hot Dipped Galvanized is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88HDG features 1"...
The Simpson Strong-Tie ABU88HDG Hot Dipped Galvanized is an adjustable post base for nominal size 8 x 8 post offers moisture protection and a finished hardware appearance. The ABU88HDG features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. The Hot Dipped Galvanized feature provides an extra layer of protection from...
Simpson Strong-Tie LCE4's universal design provides high capacity while eliminating the need for rights and lefts. For use with 4x or 6x lumber. LCE4's can be used as an end post cap application or...
Simpson Strong-Tie LCE4's universal design provides high capacity while eliminating the need for rights and lefts. For use with 4x or 6x lumber. LCE4's can be used as an end post cap application or an outside corner installation. Sold By The Each Material: 20 Gauge Finish: Standard G90 Galvanized Fastener Options: (24) 16d (24) SD10 x 1-1/2" LCE4 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of...
Simpson Strong-Tie EPB66-12 allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus...
Simpson Strong-Tie EPB66-12 allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 12" Length Base...