Simpson Strong-Tie

The Simpson Strong-Tie THDB25312CS 1/4" x 3-1/2" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease...

The Simpson Strong-Tie THDB25312CS 1/4" x 3-1/2" Titen HD heavy-duty screw anchor with countersunk head is part of a family of products that sets the standard for high-performance anchoring and ease of installation. Designed for use in dry, interior, noncorrosive environments or temporary outdoor applications, the countersunk Titen HD offers industry-leading performance even in seismic conditions. The countersunk head style is for applications that require a flush-mount profile. Countersinking...

Simpson Strong-Tie SET3G10 8.5 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked...

Simpson Strong-Tie SET3G10 8.5 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked concrete at elevated temperatures. SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths. SET-3G dispenses as a 1:1 ratio in two-component producing a high-strength, epoxy-based anchoring...

Simpson Strong-Tie Mission Outdoor Accents® APB44DSP decorative side plates attach to the bottom of a 8 x 8 post or column installed with the APB44 or APB44R post base. These plates provide a...

Simpson Strong-Tie Mission Outdoor Accents® APB44DSP decorative side plates attach to the bottom of a 8 x 8 post or column installed with the APB44 or APB44R post base. These plates provide a finished look to an installed post base. These decorative side plates provide a black powder coat finish over ZMax® galvanization for extra corrosion resistance. Install these side plates with Outdoor Accents® SDWS22312DBB structural wood screws and STN22 hex-head washers (sold separately) for...

The Simpson Strong-Tie APDJT1.75-4 Deck Joist Tie attaches 1-3/4" beams to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and...

The Simpson Strong-Tie APDJT1.75-4 Deck Joist Tie attaches 1-3/4" beams to the side of 4x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and hex-head washers (sold separately) for a decorative look Material: 12 Gauge Steel Coating: ZMax® galvanized...

The Simpson Strong-Tie PAB4-18 1/2" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...

The Simpson Strong-Tie PAB4-18 1/2" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong-Tie HL33PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33PC to connect lumber to concrete...

Simpson Strong-Tie HL33PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL33PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 7 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 2-1/2" (L) Bolt Holes: (2) 1/2" HL33PC...

The Simpson Strong-Tie VPA2.06 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2" wide rafters to the top plate. It will adjust to accommodate slopes...

The Simpson Strong-Tie VPA2.06 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 2-1/16" Actual Joist Width: 2"...

Simpson Strong-Tie HRS12 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value....

Simpson Strong-Tie HRS12 12-Gauge Heavy Strap Ties are designed to splice 2x lumber using the the edge. The hole design reduces splitting in the lumber so you achieve the desired load value. Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 1-3/8" (Wide) x 12" (Length) Fastener Options: (14) .148" x 2-1/2" Nails or (14) SD9112 Structural Screws HRS12 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...

Simpson Strong-Tie MSTA12Z ZMaz® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of...

Simpson Strong-Tie MSTA12Z ZMaz® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: ZMax® G185 Galvanized Dimensions: 1-1/4" (Wide) x 12" (Length) Fasteners: (10) 10d Nails (10) SD9 x...

Head is Painted Dark Brown! The Simpson Strong-Tie 3" x .120" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood...

Head is Painted Dark Brown! The Simpson Strong-Tie 3" x .120" Dark Brown Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 1,800 nails per box Head Color - Dark Brown Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from...

The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and...

The Simpson Strong-Tie WT-8 Wedge Form Ties are designed for low foundation wall applications with a 8" width. Their 5/8" wide formed "V" design for rigidity allows accurate form spacing and support. Material: 14 Gauge Galvanized Use two 3-1/2" long wedges for each tie. Not recommended for wall pours greater than 4' high. Wall thickness from 8". Refer to technical bulletin T-WT for recommended spacing. Please Note: Wedges are sold separately. Explanation of "Stock" Availability Term Stock...

Simpson Strong-Tie N10DHDG-R 1-1/2" x .148" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. The nails are hot dipped...

Simpson Strong-Tie N10DHDG-R 1-1/2" x .148" Hot Dipped Galvanized nails are mostly used used in angle clips and straps to reach the load values that are required. The nails are hot dipped galvanized, providing medium corrosion protection. N10DHDG Information and Data Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the products are fabricated. The coating weight increases with material thickness. The minimum average coating weight is 2.0 oz./ft2 (per ASTM A123...

The Simpson Strong-Tie A34Z ZMax® Framing Clips for wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Finish: ZMax® G-185 Coating...

The Simpson Strong-Tie A34Z ZMax® Framing Clips for wood to wood connections at a 90° angle. ZMax® coating provides corrosion resistance when required. Finish: ZMax® G-185 Coating Length: 2-1/2" Flange Widths: 1-7/16" Fasteners: (8) 8d x 1-1/2" (8) SD #9 x 1-1/2" A34Z Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the standard hot-dip galvanized coating...

The Simpson Strong-Tie LS50 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time....

The Simpson Strong-Tie LS50 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS50 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Zinc Galvanizing Length: 4-7/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (8) 10d x 1-1/2" Nails LS50 Information and Installation Instructions...

The Simpson Strong-Tie L50 Reinforcing Angle are a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The...

The Simpson Strong-Tie L50 Reinforcing Angle are a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L50 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: Standard G90 Galvanized Length: 5" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (6) 10d x 1-1/2" Nails or (6) SD #10 x 1-1/2" Screws L50 Information and...

The geometry of the Simpson Strong-Tie SB7/8x24 7/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor...

The geometry of the Simpson Strong-Tie SB7/8x24 7/8" x 24" anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB7/8x24 is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line Rolled thread for higher...

The Simpson Strong-Tie H1AZ ZMax® Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1AZ is designed...

The Simpson Strong-Tie H1AZ ZMax® Hurricane Tie provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1AZ is designed for nominal 2x lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Holds the rafter or truss on both sides for high lateral load resistance Can be installed on inside or outside of...

The Simpson Strong-Tie SSTB16HDG Hot Dipped Galvanized (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...

The Simpson Strong-Tie SSTB16HDG Hot Dipped Galvanized (5/8" Diameter by 17-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 17-5/8" Minimum Embedment: 12-5/8" Finish: Hot...

The Simpson Strong-Tie BC40Z ZMax® Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. ZMax® Corrosion Protection provides additional resistance...

The Simpson Strong-Tie BC40Z ZMax® Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. ZMax® Corrosion Protection provides additional resistance to corrosive conditions. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H) 2-1/4" Finish: ZMax® Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating...

Simpson Strong-Tie ECCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4 End Column Caps comes with no coating to allow you...

Simpson Strong-Tie ECCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x...

Simpson Strong-Tie CC44 Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44 Column Caps should be used when the 4x beam extends through the 4x post. Please...

Simpson Strong-Tie CC44 Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44 Column Caps should be used when the 4x beam extends through the 4x post. Please Note: This column cap is also available in powder coat and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 7" (Length) Fasteners: (2) 5/8"...

Simpson Strong Tie LUS24Z ZMax® 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS24Z ZMax® 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24Z hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-3/4" (Seat...

Simpson Strong Tie HGUS26-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-3 hangers are...

Simpson Strong Tie HGUS26-3 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-3 hangers are designed to accept three 2 x 6 truss plates or joists with a minimum heel height of 4-5/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 4-15/16" (Wide) x 5-1/2" (Height) x 4" (Seat Depth) Fastener Options: (20) 16d Nails (Header) (8) 16d Nails (Joist)...Shorter Nails Not Allowed...

Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...

Simpson Strong Tie HU26 2 x 4/6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 3-1/16" (Height) x 2-1/4" (Seat Depth) Fasteners: (4) .162 x 3-1/2" (16d) Nails (Header) (2) .148 x 1-1/2" (10d) Nails (Joist) HU26 Information and...