Simpson Strong-Tie

The Simpson Strong-Tie CPT88Z concealed 8 x 8 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the...

The Simpson Strong-Tie CPT88Z concealed 8 x 8 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 4-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT88Z is tested and load-rated...

The Simpson Strong-Tie DSVT3R5LB #10 x 3" Deck Drive™ Tan Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start...

The Simpson Strong-Tie DSVT3R5LB #10 x 3" Deck Drive™ Tan Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving...

The Simpson Strong-Tie 1-3/4" x 14" MIT1.81/14 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...

The Simpson Strong-Tie 1-3/4" x 14" MIT1.81/14 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...

Simpson Strong-Tie Outdoor Accents® APA4 angles tie together beams, rafters and more. The APA4 angle makes structural connections between beams and posts much more visually appealing. These...

Simpson Strong-Tie Outdoor Accents® APA4 angles tie together beams, rafters and more. The APA4 angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Using The Outdoor Accents® structural screws and STN22 Shear Tube nuts allows you to create an outdoor gazebo, patio cover etc. that is not only structurally sound but pleasing to the eye....

Simpson Strong-Tie HDU2-SDS2.5HDG Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come...

Simpson Strong-Tie HDU2-SDS2.5HDG Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (6) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Hot Dipped Galvanized holdowns should be used when the application in...

The Simpson Strong-Tie 1-3/4" x 16" MIT1.81/16 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...

The Simpson Strong-Tie 1-3/4" x 16" MIT1.81/16 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...

The Simpson Strong-Tie DSVR3R5LB #10 x 3" Deck Drive™ Red Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start...

The Simpson Strong-Tie DSVR3R5LB #10 x 3" Deck Drive™ Red Wood Screw is a powerful fastening solution for preservative-treated decking applications. With its under-head nibs and fast-start tip, the DSV is ideally suited to be driven and countersunk into today’s wood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast-growth lumber. Also DSV screws are available in collated strips for use in the Quik Drive® auto-feed screw driving...

Simpson Strong Tie HUS26-2 Double 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...

Simpson Strong Tie HUS26-2 Double 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5-3/16" (Height) x 2" (Seat Depth) Fastener Options: (4) 16d Nails or SD10212 Screws(Header) (6) 16d Nails...

The Simpson Strong-Tie PC6Z Center Post Cap is designed with the post and beam flanges in-line so that the PC6Z center post cap can accommodate (3) 6x post sizes. The PC6Z now uses easier-to-install...

The Simpson Strong-Tie PC6Z Center Post Cap is designed with the post and beam flanges in-line so that the PC6Z center post cap can accommodate (3) 6x post sizes. The PC6Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough dimensional size as a...

The Simpson Strong-Tie ABW46RZ for rough 4x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above...

The Simpson Strong-Tie ABW46RZ for rough 4x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW46RZ...

The Simpson Strong-Tie HD5BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This is...

The Simpson Strong-Tie HD5BHDG Hot Dipped Galvanized Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This is required so that the wood is not weakened from drilling too close to the end. However the anchor can still be installed raised above the sill plate if you desire. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral...

The geometry of the Simpson Strong-Tie SB7/8x24HDG 7/8" x 24" Hot Dipped Galvanized anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions...

The geometry of the Simpson Strong-Tie SB7/8x24HDG 7/8" x 24" Hot Dipped Galvanized anchor bolt is the latest development in high capacity anchors. The smooth transition angle of the bolt positions the head of the anchor into an optimum position in the 8" wide concrete stem wall without creating excessive horizontal forces. The SB7/8x24HDG is designed to maximize performance with minimum embedment of 18". Identification on the bolt head showing embedment angle and model Stamped embedment line...

Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for...

Simpson Strong-Tie HTU28-2 Double 2 x 8 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU28-2 hanger very versatile for various trusses. Additionally you can have the HTU28-2 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is...

The Simpson Strong-Tie HDQ14-SDS2.5 holdown combines low deflection and high loads with ease of installation. (30) 2-1/2" SDS Simpson Strong-Tie® Strong-Drive® screws are included which...

The Simpson Strong-Tie HDQ14-SDS2.5 holdown combines low deflection and high loads with ease of installation. (30) 2-1/2" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Material: 7 Gauge Steel Finish: Simpson Gray Paint Anchor Bolt Size: 1" Minimum Post Thickness:...

Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily...

Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x...

The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...

The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) .162" x 3-1/2" 16d Nails (Face) (6) .148" x 1-1/2"...

Simpson Strong-Tie ST22 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications....

Simpson Strong-Tie ST22 16-Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. ST series straps are designed to be used in a variety of applications. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 21-5/8" (Length) Fastener Options: (18) 16d Nails (18) SD10 x 1-1/2" Screws ST22 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains...

Simpson Strong-Tie LSTA18 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x...

Simpson Strong-Tie LSTA18 20 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. LSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a LSTA strap that requires bending the strap can only be bent one time. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: (14) 10d Nails (14) SD9 x 1-1/2" Screws...

The Simpson Strong-Tie CJT4ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...

The Simpson Strong-Tie CJT4ZL is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT4ZL long (4-3/4") pins can be used with 5-1/8" Glulam Beams or 6x sawn lumber. Minimum Joist Size: Douglas Fir - 6 x 10 Glulam Beam - 5-1/8" x 9" Material: 12 Gauge Finish:...

Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator...

Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12) .148 x 3" Nails (Face-Min) (14) .148 x 3" Nails (Face-Max)...

Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2-SDS hangers with concealed...

Simpson Strong Tie HUCQ210-2-SDS 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x 2-1/2" Screws...

Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with 10d ,16d nails...

Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-1/2" (Seat Depth) Fastener Options: (6) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 1-1/2" 10d Nails (Joist)...

Simpson Strong-Tie CCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The CCO4 Column Caps comes with no coating to allow you to...

Simpson Strong-Tie CCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The CCO4 Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x 7"...

The Simpson Strong-Tie ABU46Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46Z...

The Simpson Strong-Tie ABU46Z with ZMax® Corrosion Resistance is an adjustable post base for nominal size 4 x 6 post offers moisture protection and a finished hardware appearance. The ABU46Z features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 12 Gauge Strap Material: 12 Gauge Dimensions: (W)...