Simpson Strong-Tie

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast...

Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/11.88 is used to install 1-3/4" x 11-7/8" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 11-7/8" (Height) x 2" (Seat Depth) Fastener Options : (10) .148 x 3" Nails (Face) IUS1.81/11.88 Information and Installation...

The Simpson MIU1.81/14 hanger is designed to hang 1-3/4" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/14 features positive-angle...

The Simpson MIU1.81/14 hanger is designed to hang 1-3/4" x 14" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/14 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie HD5B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This is required so that the wood...

The Simpson Strong-Tie HD5B Holdown is a self jigging anchor that ensures the bottom bolt that attaches to the stud or post is seven times the diameter of the bolt. This is required so that the wood is not weakened from drilling too close to the end. However the anchor can still be installed raised above the sill plate if you desire. All the HDB style holdown anchors are designed to provide loads for intermediate-load-range shearwalls, braced wall panels and lateral applications. Base...

The Simpson Strong-Tie HDQ11-SDS2.5 holdown combines low deflection and high loads with ease of installation. (24) 2-1/2" SDS Simpson Strong-Tie® Strong-Drive® screws are included which...

The Simpson Strong-Tie HDQ11-SDS2.5 holdown combines low deflection and high loads with ease of installation. (24) 2-1/2" SDS Simpson Strong-Tie® Strong-Drive® screws are included which install easily, reduces fastener slip and provide a greater net section area of the post when compared to bolts. They may be installed either flush or raised off the mudsill without a reduction in load value. Material: 7 Gauge Steel Finish: Simpson Gray Paint Anchor Bolt Size: 1" Minimum Post Thickness:...

The S/HDU6 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU6 holdown...

The S/HDU6 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU6 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 5/8" Fasteners (Not Included): (12) #14 Screws...

The Simpson PB44Z ZMax® Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coated for...

The Simpson PB44Z ZMax® Post Base for 4 x 4 (3-1/2" x 3-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coated for extra corrosion resistance Embossed for greater strength Stress relief holes resist tearing Fasteners: (12) 16d Nails PB44Z information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating) than the...

Simpson Strong-Tie EPB44HDG allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus...

Simpson Strong-Tie EPB44HDG allows you to install an elevated 4 x 4 post base from 1" to 2-1/2" above the concrete. This clearance allows the 4 x 4 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and unbraced carports. Hot Dip Galvanizing provides corrosion resistance for additional...

Simpson Strong-Tie CB44HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the...

Simpson Strong-Tie CB44HDG Hot Dipped Galvanized column bases are used to provide a connection of a 4 x 4 (3-1/2" x 3-1/2") post to concrete. The CB base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 2" Wide Hot Dipped Galvanized Steel Base Material: 7 Ga Hot Dipped Galvanized (3-9/16" x 3-9/16") Fasteners: (2) 5/8" Machine Bolts CB44HDG Information and Installation Instructions Hot Dipped Galvanized Coating Information Hot-Dip Galvanizing is applied after the...

The Simpson CBSQ44-SDS2HDG Hot Dipped Galvanized (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1"...

The Simpson CBSQ44-SDS2HDG Hot Dipped Galvanized (for 3-1/2" x 3-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Hot Dipped Galvanized for additional corrosion resistance. Easier Installation Higher Loads Hot Dipped Galvanized Column Size: 4 x 4 Nominal (3-1/2" x 3-1/2") Base: 12 Ga. (3-9/16" x...

The Simpson Strong-Tie ABW46Z for 4x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete...

The Simpson Strong-Tie ABW46Z for 4x6 posts is an adjustable post base which offers moisture protection and finished hardware appearance. These post bases feature 1" standoff height above concrete floors, code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Additionally the ZMax® coating provides additional protection from exposure to the elements. The ABW46Z allows...

The Simpson Strong-Tie DTT2Z ZMax® Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to...

The Simpson Strong-Tie DTT2Z ZMax® Tension Tie is a safe, cost-effective way to attach deck-railing posts to the deck framing. Because the post is tied back into the deck joists, rather than to the rim joist alone, the connection is stronger than typical through-bolt installations and complies with IRC and IBC code requirements regarding handrail and guardrail post connections for decks. The DTT2Z also complies with the new IRC requirements for laterally tying the deck to the house....

The new patent-pending Simpson Strong-Tie® MPB66Z is the first post base specifically designed to provide moment resistance for 6 x 6 columns or posts. An innovative overlapping sleeve design...

The new patent-pending Simpson Strong-Tie® MPB66Z is the first post base specifically designed to provide moment resistance for 6 x 6 columns or posts. An innovative overlapping sleeve design encapsulates the post, helping to resist rotation around its base. The MPB66Z is ideal for outdoor structures, such as carports, fences and decks. Built-in standoff tabs provide the required 1" standoff to resist decay of the post while eliminating multiple parts and assembly. Additionally, the MPB66Z...

The Simpson Strong-Tie ABU44SS with Type 316L Stainless Steel Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware...

The Simpson Strong-Tie ABU44SS with Type 316L Stainless Steel Corrosion Resistance is an adjustable post base for nominal size 4 x 4 post offers moisture protection and a finished hardware appearance. The ABU44SS features 1" standoff height above concrete floors which is code-required when supporting permanent structures that are exposed to the weather or water splash, or in basements. They reduce the potential for decay at post and column ends. Base Material: 16 Gauge Strap Material: 12 Gauge...

The Simpson Strong-Tie BC40Z ZMax® Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. ZMax® Corrosion Protection provides additional resistance...

The Simpson Strong-Tie BC40Z ZMax® Half Base is an economical way to attach a nominal 4 x 4 post to a wood subfloor or bottom plate. ZMax® Corrosion Protection provides additional resistance to corrosive conditions. Base Material: 18 Gauge Dimensions: (W) 3-9/16" x (L) 3-1/4" x (H) 2-1/4" Finish: ZMax® Fastener Options: (10) 16d Nails (10) SD10 x 1-1/2" BC40Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating...

Simpson Strong-Tie CC44 Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44 Column Caps should be used when the 4x beam extends through the 4x post. Please...

Simpson Strong-Tie CC44 Column Caps provide a high capacity connection between a 4x wide beam and a 4x post. CC44 Column Caps should be used when the 4x beam extends through the 4x post. Please Note: This column cap is also available in powder coat and/or 90° rotated legs as a special order. Please call 800-323-2999 for pricing and lead time for shipping. Material: 7 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 3-5/8" (Beam) x 3-5/8" (Post) x 7" (Length) Fasteners: (2) 5/8"...

Simpson Strong-Tie ECCQ3-6SDS2.5 End Column Caps provide a high capacity connection between a 3-1/8" beam and a 6x post. ECCQ3-6SDS2.5 End Column Caps should be used when the beam ends at the post....

Simpson Strong-Tie ECCQ3-6SDS2.5 End Column Caps provide a high capacity connection between a 3-1/8" beam and a 6x post. ECCQ3-6SDS2.5 End Column Caps should be used when the beam ends at the post. Each ECCQ3-6SDS2.5 End Column Cap includes the required SDS screws that will allow you to install the cap faster as well making them lower profile than caps with bolts. Please Note: This column cap may be available in Hot Dipped Galvanized or Stainless Steel as a special order. Please call our sales...

Simpson Strong-Tie ECCLL464 End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint...

Simpson Strong-Tie ECCLL464 End Corner Column Caps provide a left connection between (2) 4x beams and (1) 4 x 6 posts when both beams end at the post. Material: 7 gauge Finish: Simpson Gray Paint Dimensions: 3-1/2" (Beams) x 5-1/2" (Posts) Fasteners: (6) 5/8" Diameter Machine Bolts ECCLL464 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint intended to only protect the product while it is being warehoused and in...

Simpson Strong-Tie ECCOQ4-SDS2.5 Weld-On End Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel...

Simpson Strong-Tie ECCOQ4-SDS2.5 Weld-On End Column Cap with no post straps are designed to provide strong column-beam connections in end-of-beam and center beam applications on top of steel members. The column cap features a design without legs, enabling a field-welded attachment to steel columns and beams. The seat of the column cap provides additional surface area for bearing that extends beyond the side of the column. This helps distribute the load from the beam and provide support for the...

Simpson Strong-Tie ECCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4 End Column Caps comes with no coating to allow you...

Simpson Strong-Tie ECCO4 End Column Caps with no post straps provides a high capacity connection between a 4x wide beam and a steel post. The ECCO4 End Column Caps comes with no coating to allow you to weld the cap either in the field or the shop. Please Note: This column cap may be ordered as Hot Dipped Galvanized. Please call our sales department direct at 800-323-2999 for more information including pricing and availability. Material: 7 gauge Finish: No Coating Dimensions: 3-5/8" (Beam) x...

The Simpson AC4Z ZMax® Split Post Caps allow you to install the cap after the rough 4 x 4 post and rough 4x beam are set. ZMax® protection provides additional corrosion resistance when...

The Simpson AC4Z ZMax® Split Post Caps allow you to install the cap after the rough 4 x 4 post and rough 4x beam are set. ZMax® protection provides additional corrosion resistance when applicable. Material: 18 Gauge Finish: ZMax® G-185 Galvanized Dimensions 4" (W) x 7" (L) Fastener Options: Beam...(8) .162 x 3-1/2" Nails (Min) Beam...(14) .162 x 3-1/2" Nails (Max) Post...(8) .162 x 3-1/2" Nails (Min) Post...(14) .162 x 3-1/2" Nails (Max) Post and Beam...(28) SD10 x 1-1/2" (Max)...

The Simpson BC4R Rough Post Caps allow you to create a light duty connection between a 4 x 4 rough post and 4x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 4" (W) x 4" (L) Fastener...

The Simpson BC4R Rough Post Caps allow you to create a light duty connection between a 4 x 4 rough post and 4x rough beam. Material: 18 Gauge Finish: Standard G90 Dimensions 4" (W) x 4" (L) Fastener Options: (24) 16d common BC4R Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of corrosion resistance and...

The Simpson Strong-Tie EPC6Z post cap is designed with the post and beam flanges in-line so that the EPC6Z end post cap can accommodate (3) 6x post sizes. The EPC6Z now uses easier-to-install 10d...

The Simpson Strong-Tie EPC6Z post cap is designed with the post and beam flanges in-line so that the EPC6Z end post cap can accommodate (3) 6x post sizes. The EPC6Z now uses easier-to-install 10d common nails saving you both time and labor. An alternate choice of fasteners is Strong-Drive® #9x1 1/2" SD Connector screws. Zmax® finish is standard to meet exposure conditions in many environments. Please Note: This cap may be special ordered in a rough dimensional size as a manufactured...

The Simpson Strong-Tie CPT88Z concealed 8 x 8 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the...

The Simpson Strong-Tie CPT88Z concealed 8 x 8 post base provides a clean, concealed look while providing a 1" standoff height above concrete. The 1" standoff reduces the potential for decay at the post end and satisfies code requirements for posts that are exposed to weather, water splash or in basements. Each base includes (3) 1/2" x 4-3/4" mechanical galvanized dowels. If 1/2" machine bolts are substituted it is recommended they are hot dipped galvanized. The CPT88Z is tested and load-rated...

Simpson Strong Tie LUS24Z ZMax® 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS24Z ZMax® 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24Z hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: ZMax® G-185 Coating Dimensions: 1-9/16" (Wide) x 3-1/8" (Height) x 1-3/4" (Seat...