Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie H2A Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H2A installation ties the rafter...
The Simpson Strong-Tie H2A Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H2A installation ties the rafter to the stud while spanning a top plate. The Simpson H2A requires (12) 8d x 1-1/2" joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (12) 8d x 1-1/2" Nails H2A Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
Simpson Strong-Tie HL43PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43PC to connect lumber to concrete...
Simpson Strong-Tie HL43PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL43PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 3 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 3" (L) Bend to Hole Center: 2-3/4" Bolt...
The Simpson Strong-Tie RTC2Z ZMax® Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 2x horizontal members at a corner to a vertical 2 x 4 wood post....
The Simpson Strong-Tie RTC2Z ZMax® Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 2x horizontal members at a corner to a vertical 2 x 4 wood post. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized...
The Simpson Strong-Tie SP2Z ZMax® Stud Plate Tie is designed for double-top-plate-to-stud connection to resist uplift. The SP2Z stud plate ties features angled holes for a positive connection...
The Simpson Strong-Tie SP2Z ZMax® Stud Plate Tie is designed for double-top-plate-to-stud connection to resist uplift. The SP2Z stud plate ties features angled holes for a positive connection from the stud to the plates. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Features embossments that strengthen the stud-to-plate connection Designed to resist wind and seismic forces Can be used before or after installation including in retrofit...
Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie LTP4 Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent...
Save by Purchasing a Pallet of 48 Boxes! The Simpson Strong-Tie LTP4 Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. Material: 20 Gauge Finish: Standard G90 Length: 4-1/4" Width: 3" Fasteners: (12) 8d x 1-1/2" (12) SD #9 x 1-1/2" LTP4 Information and Installation Instructions Standard G90 Zinc Galvanized Coating...
The Simpson Strong-Tie H2AZ ZMax® Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H2AZ installation ties...
The Simpson Strong-Tie H2AZ ZMax® Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H2AZ installation ties the rafter to the stud while spanning a top plate. The Simpson H2AZ requires (12) 8d x 1-1/2" joist nails. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (12) 8d x 1-1/2" Nails H2AZ Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating...
Simpson Strong-Tie HL46 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL46 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a gusset or black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Paint Dimensions: 4-1/4" (W1) x 4-1/4"...
The Simpson Strong-Tie L90Z Reinforcing Angle with ZMax® protection is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility...
The Simpson Strong-Tie L90Z Reinforcing Angle with ZMax® protection is a 9" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L90Z angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: ZMax® Coating Length: 9" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (10) 10d x 1-1/2" Nails or (10) SD #10 x 1-1/2" L90Z...
The Simpson Strong-Tie RTC42 Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 2x horizontal members at a corner to a vertical 4 x 4 wood post....
The Simpson Strong-Tie RTC42 Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 2x horizontal members at a corner to a vertical 4 x 4 wood post. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and...
Simpson Strong-Tie HL46HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46HDG to connect lumber...
Simpson Strong-Tie HL46HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL46HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 3 gauge Finish: Hot Dipped Galvanized Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 6" (L) Bolt Holes: (4) 3/4" HL46HDG Heavy Angle Information and...
The Simpson Strong-Tie RTC44 Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 4x horizontal members at a corner to a vertical 4 x 4 wood post....
The Simpson Strong-Tie RTC44 Rigid Tie® Corner Connector is a uniquely designed rigid tie connector that connects two 4x horizontal members at a corner to a vertical 4 x 4 wood post. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and...
The Simpson Strong-Tie SP4 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top...
The Simpson Strong-Tie SP4 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment Material: 20...
The Simpson Strong-Tie A33 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 3" Flange #2...
The Simpson Strong-Tie A33 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 3" Flange #2 (W2): 3" Fasteners: (8) 10d x 3" Nails or(8) SD9112 Screws A33 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low...
The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single...
The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single top plate to the rafter or truss. The Simpson H3 requires (8) 8d joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (8) 8d x 2-1/2" Nails H3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90...
Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL49 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL49 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available with a black powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 3 gauge Finish: Simpson Gray Dimensions: 4-1/4" (W1) x 4-1/4" (W2) x 9" (L) Bolt Holes:...
The Simpson Strong-Tie LS90Z ZMax® Coated Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only...
The Simpson Strong-Tie LS90Z ZMax® Coated Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS90Z Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: ZMax® Coating Galvanizing Length: 7-7/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (12) 10d x 1-1/2" Nails LS90Z Information and...