Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie HL53PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53PC to connect lumber to concrete...
Simpson Strong-Tie HL53PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 7 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53PC...
The Simpson Strong-Tie LTP5 spans subfloor at the top of the blocking or rim joist. The embossments enhance performance and the min/max nailing option allows for design flexibility. Material: 20...
The Simpson Strong-Tie LTP5 spans subfloor at the top of the blocking or rim joist. The embossments enhance performance and the min/max nailing option allows for design flexibility. Material: 20 Gauge Finish: Standard G90 Zinc Coating Length: 5-1/8" Width: 4-1/2" Fasteners:(12) 8d x 1-1/2" LTP5 specifications and installation instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both...
The Simpson Strong-Tie RTT22Z ZMax® T Connector is designed to secure a horizontal 2x member to a vertical 2x member in wood applications. Manufactured to high-quality standards to ensure solid...
The Simpson Strong-Tie RTT22Z ZMax® T Connector is designed to secure a horizontal 2x member to a vertical 2x member in wood applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie tee connector features a ZMax® galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and stronger than angled fastening Material:...
The Simpson Strong-Tie SP8Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the...
The Simpson Strong-Tie SP8Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment...
Simpson Strong-Tie H6Z Hurricane Tie with ZMax® Corrosion Protective Coating are designed to provide a connection from the stud to either the top plate or band (rim) joist. The H6Z Tie requires...
Simpson Strong-Tie H6Z Hurricane Tie with ZMax® Corrosion Protective Coating are designed to provide a connection from the stud to either the top plate or band (rim) joist. The H6Z Tie requires (16) 8d .131" x 1-1/2" or longer joist nails. Material: 16 Gauge Finish: ZMax® G-185 Coating Fastener Options: (16) 8d x 1-1/2" Nails H6Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a...
Simpson Strong-Tie HL55 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL55 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized-Level of Corrosion Resistance: Low Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 5" (L) Bolt Holes: (8) 1/2" HL55 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
Simpson Strong-Tie HL55HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55HDG to connect lumber...
Simpson Strong-Tie HL55HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 5" (L) Bolt Holes: (8) 1/2" HL55HDG Heavy Angle Information and...
The Simpson Strong-Tie® RTU2 Rigid Tie® Connector is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid...
The Simpson Strong-Tie® RTU2 Rigid Tie® Connector is designed for connecting intersecting members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this U-shaped rigid tie features a G90 galvanized finish for added corrosion resistance. The versatile RTU2 is ideal for a variety of projects including fences, railings and utility furniture or any application where a 2x member crosses another. Fastens with Simpson Strong-Tie®...
The Simpson Strong-Tie SPH4 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the...
The Simpson Strong-Tie SPH4 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. SPH4R can be special ordered when the strap needs to be connected to a 1/2" shear wall also. Load rated...
Simpson Strong-Tie H7Z Hurricane Tie with ZMax® Corrosion Protective Coating are designed to provide a connection from the stud to both the top plate and rafter. The H7Z Tie requires (14) 8d...
Simpson Strong-Tie H7Z Hurricane Tie with ZMax® Corrosion Protective Coating are designed to provide a connection from the stud to both the top plate and rafter. The H7Z Tie requires (14) 8d .131" x 1-1/2" or longer joist nails. Material: 16 Gauge Finish: ZMax® G-185 Coating Fastener Options: (14) 8d x 1-1/2" Nails H7Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating)...
Simpson Strong-Tie HL55PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55PC to connect lumber to concrete...
Simpson Strong-Tie HL55PC Powder Coat Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL55PC to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Standard G90 Zinc Coating with a Black Powder Coat provides a low level of corrosion resistance. Material: 7 gauge Finish: Standard G90 Zinc Coating with a Black Powder Coat Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 5" (L) Bolt Holes: (8) 1/2" HL55PC Heavy...
The Simpson Strong-Tie SPH4Z ZMax® Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears...
The Simpson Strong-Tie SPH4Z ZMax® Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides corrosion resistance when required. Load rated Designed to resist...
Simpson Strong-Tie HL57 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL57 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL57 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL57 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset, hot dipped galvanized or powder coating as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x...
The Simpson Strong-Tie SPH6 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the...
The Simpson Strong-Tie SPH6 Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. SPH6R can be special ordered when the strap needs to be connected to a 1/2" shear wall also. Load rated...
Simpson Strong-Tie H8 Hurricane Tie for attaching double top plates to a rafter, stud to a sill plate or I-joist to double top plates. The H8 Hurricane Tie uses (10) 10d .148" x 1-1/2" joist nails...
Simpson Strong-Tie H8 Hurricane Tie for attaching double top plates to a rafter, stud to a sill plate or I-joist to double top plates. The H8 Hurricane Tie uses (10) 10d .148" x 1-1/2" joist nails or SD #9 x 1-1/2" Structural Screws. Material: 18 Gauge Finish: Standard G90 Zinc Coating Fastener Options: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2" Screws H8 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90...
The Simpson Strong-Tie SPH6Z ZMax® Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears...
The Simpson Strong-Tie SPH6Z ZMax® Heavy U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist roof uplift. This heavy U-shaped strap has a horizontal portion that bears against the wood wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. This tie is a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides corrosion resistance when required. Load rated Designed to resist...