Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie LTP4Z ZMax® Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and...
The Simpson Strong-Tie LTP4Z ZMax® Lateral Tie Plate transfers shear forces for top plate-to-rim joist or blocking connections. Nail holes are spaced to prevent wood splitting for single and double top plate applications. May be installed over plywood sheathing. Material: 20 Gauge Finish: ZMax® Length: 4-1/4" Width: 3" Fasteners: (12) 8d x 1-1/2" (12) SD #9 x 1-1/2" LTP4 Information and Installation Instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker...
The Simpson Strong-Tie RTR Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid...
The Simpson Strong-Tie RTR Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance. The versatile RTR is ideal for a variety of projects including fences, railings and utility furniture. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from...
The Simpson Strong-Tie SP4Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the...
The Simpson Strong-Tie SP4Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Load rated...
The Simpson Strong-Tie A44 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 4-9/16" Flange...
The Simpson Strong-Tie A44 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 4-9/16" Flange #2 (W2): 4-3/8" Fasteners: (8) 10d x 3" Nails or(8) SD9112 Screws A44 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H3 Clip is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3 installation ties the single top plate to the rafter or truss. The Simpson H3 requires (8) 8d joist nails. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (8) 8d x 2-1/2" Nails H3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard...
The Simpson Strong-Tie RTRZ ZMax® Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure...
The Simpson Strong-Tie RTRZ ZMax® Rail Connector is designed for connecting a 2x member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. The versatile RTRZ is ideal for a variety of projects including fences, railings and utility furniture. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included)...
The Simpson Strong-Tie SP6 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top...
The Simpson Strong-Tie SP6 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment Material: 20...
The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange...
The Simpson Strong-Tie A66 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 1-1/2" Flange #1 (W1): 5-7/8" Flange #2 (W2): 5-7/8" Fasteners: (6) 10d x 3" Nails or (4) 3/8" Bolts A66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a...
The Simpson Strong-Tie H3Z Clip with ZMax® Corrosion resistance is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A...
The Simpson Strong-Tie H3Z Clip with ZMax® Corrosion resistance is part of the Hurricane Tie System that features various configurations of wind and seismic ties for trusses and rafters. A typical H3Z installation ties the single top plate to the rafter or truss. The Simpson H3Z requires (8) 8d joist nails. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (8) 8d x 2-1/2" Nails H3Z Information and Installation Instructions. ZMax® Galvanized Coating Information ZMax®...
Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL53 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53 Heavy Angle Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating...
The Simpson Strong-Tie SP6Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the...
The Simpson Strong-Tie SP6Z ZMax® U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Load rated...
The Simpson Strong-Tie A88 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 22" Flange #1 (W1): 8" Flange #2...
The Simpson Strong-Tie A88 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 22" Flange #1 (W1): 8" Flange #2 (W2): 8" Fasteners: (8) 10d x 3" Nails or (6) 3/8" Bolts A88 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
Simpson Strong-Tie HL53HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53HDG to connect lumber...
Simpson Strong-Tie HL53HDG Hot Dipped Galvanized Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL53HDG to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Hot dipped galvanizing provide corrosion resistance from the elements or corrosive lumber. Material: 7 gauge Finish: Hot Dipped Galvanized Dimensions: 5-3/4" (W1) x 5-3/4" (W2) x 2-1/2" (L) Bolt Holes: (4) 1/2" HL53HDG Heavy Angle Information...
The Simpson Strong-Tie RTT12 T Connector is designed to secure a horizontal 1x member to a vertical 2x member in wood applications. Manufactured to high-quality standards to ensure solid...
The Simpson Strong-Tie RTT12 T Connector is designed to secure a horizontal 1x member to a vertical 2x member in wood applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie tee connector features a galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and stronger than angled fastening Material: 18 Gauge Finish:...
The Simpson Strong-Tie SP8 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top...
The Simpson Strong-Tie SP8 U-Shaped Stud Plate Tie is designed as a stud-to-plate connection to resist uplift. This U-shaped strap has a horizontal portion that bears against the wood-wall top plates or sill plates and two vertical legs that are nailed to the edges of a wood stud. These ties are a cost-effective option when properly installed before the placement of the wall. Load rated Designed to resist wind and seismic forces Does not require top or bottom track attachment Material: 20...
Simpson Strong-Tie H6 Hurricane Tie are designed to provide a connection from the stud to either the top plate or band (rim) joist. The H6 Tie requires (16) 8d .131" x 1-1/2" or longer joist nails....
Simpson Strong-Tie H6 Hurricane Tie are designed to provide a connection from the stud to either the top plate or band (rim) joist. The H6 Tie requires (16) 8d .131" x 1-1/2" or longer joist nails. Material: 16 Gauge Finish: Standard G90 Zinc Fastener Options: (16) 8d x 1-1/2" Nails H6 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This...