Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie ML26Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...
The Simpson Strong-Tie ML26Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (8) SDS25112 Screws Dimensions: 6" Length x 2" (Flange Widths) ML26Z Information and...
The Simpson Strong-Tie RSP4 Reversible Stud Plate Tie is designed to create a continuous load path to resist uplift. This versatile stud-plate tie is reversible and is able to connect a wood stud to...
The Simpson Strong-Tie RSP4 Reversible Stud Plate Tie is designed to create a continuous load path to resist uplift. This versatile stud-plate tie is reversible and is able to connect a wood stud to either a double top plate or a sill plate of a wood-framed wall. The RSP4 features locating tabs that aid in attaching the tie to the plates to ensure proper placement during installation. Embossments feature provides strength at the bend Designed to resist wind and seismic forces Material: 20...
The Simpson Strong-Tie RTF2Z ZMax® Rigid Tie® Connector is designed to connect two horizontal 2x members to a vertical 2x4 in wood applications. Manufactured to high-quality standards to...
The Simpson Strong-Tie RTF2Z ZMax® Rigid Tie® Connector is designed to connect two horizontal 2x members to a vertical 2x4 in wood applications. Manufactured to high-quality standards to ensure solid performance, this flat rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included) Constructed from corrosion-resistant galvanized steel Easier and stronger than angled fastening...
The Simpson Strong-Tie TJC37 is a versatile connector for jack trusses. Adjustable from 0° to 85°, you can bend the TJC to the desired position (one bend cycle only). Each TJC is shipped...
The Simpson Strong-Tie TJC37 is a versatile connector for jack trusses. Adjustable from 0° to 85°, you can bend the TJC to the desired position (one bend cycle only). Each TJC is shipped with 67.5° bend. Nail hole locations allow for easy installation. No bevel cut is required. Minimum nailing option on TJC37 provides faster installation and lower installed cost. Material: 16 Gauge Finish: Standard G90 Zinc Width: 3-1/8" x 3-1/2" x 3-1/2" Fasteners (Minimum): (4) .131 x 1-1/2"...
The Simpson Strong-Tie VPA4 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 3-1/2" wide rafters to the top plate. It will adjust to accommodate...
The Simpson Strong-Tie VPA4 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 3-1/2" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 3-9/16" Actual Joist Width: 3-1/2"...
The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate...
The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2" Screws H2.5AZ Information and Installation...
The Simpson Strong-Tie LS90 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time....
The Simpson Strong-Tie LS90 Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS90 Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. Material: 18 Gauge Finish: Standard G90 Zinc Galvanizing Length: 7-7/8" Flange Widths: 2-1/4" x 2-1/4" Fasteners: (12) 10d x 1-1/2" Nails LS90 Information and Installation Instructions...
The Simpson Strong-Tie ML26SS Stainless Steel 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to...
The Simpson Strong-Tie ML26SS Stainless Steel 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: Type 316L Stainless Steel Material: 12 Gauge Fasteners (Not Included): (8) SDS25112 Screws Dimensions: 6" Length x 2" (Flange Widths)...
Simpson Strong-Tie TA10Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10Z angles are easily...
Simpson Strong-Tie TA10Z Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA10Z angles are easily installed with (7) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (3) Stringer, (4) Tread (Max) SDS25112 Screws - (4) Stringer, (3) Tread Dimensions: 10-1/4" Length x...
The Simpson Strong-Tie TBE4 Truss Bearing Enhancer transfers load from the truss or girder to 2 x 4 wall top plates for bearing-limited conditions and provides exceptional uplift capacity. It...
The Simpson Strong-Tie TBE4 Truss Bearing Enhancer transfers load from the truss or girder to 2 x 4 wall top plates for bearing-limited conditions and provides exceptional uplift capacity. It replaces nail-on scabs that provide lower load transfer, or in some cases, an additional ply when needed for bearing. One size works with any number of girder plies. Must be used in pairs Material: 18 Gauge Finish: Standard G90 Zinc Width: 3-9/16" Fasteners (Rafter): (10) .148 x 1-1/2" Nails (Single Truss...
The Simpson Strong-Tie TJC57 is a versatile connector for jack trusses. Adjustable from 0° to 85°, you can bend the TJC to the desired position (one bend cycle only). Each TJC is shipped...
The Simpson Strong-Tie TJC57 is a versatile connector for jack trusses. Adjustable from 0° to 85°, you can bend the TJC to the desired position (one bend cycle only). Each TJC is shipped with 67.5° bend. Nail hole locations allow for easy installation. No bevel cut is required. SD screws can be used to increase standard load values. Material: 16 Gauge Finish: Standard G90 Zinc Width: 5-1/8" x 3-1/2" x 3-1/2" Fasteners (Nails): (12) .131 x 1-1/2" Nails (Carrying Member) (12) .131 x...
The Simpson Strong-Tie A35Z ZMax® Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the...
The Simpson Strong-Tie A35Z ZMax® Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35Z Framing Clips to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. ZMax® provides additional corrosion protection when required. Material: 18 Gauge Finish: ZMax® G-185 Coating Length: 4-1/2" Flange...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A...
Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2"...
Simpson Strong-Tie HL37 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL37 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL37 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL37 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available as Hot Dipped Galvanized and Powder Coating as a special order. Additionally, the standard angle and powder coated angles can be special ordered with gussets. Please call our sales department direct at...
The Simpson Strong-Tie L70Z Reinforcing Angle with ZMax® protection is a 7" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility...
The Simpson Strong-Tie L70Z Reinforcing Angle with ZMax® protection is a 7" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L70Z angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: ZMax® Coating Length: 7" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (8) 10d x 1-1/2" Nails or (8) SD #10 x 1-1/2" Screws...
The Simpson Strong-Tie ML28Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...
The Simpson Strong-Tie ML28Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (10) SDS25112 Screws Dimensions: 8" Length x 2" (Flange Widths) ML28Z Information and...