Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...
Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-3/4" (Seat Depth) Fastener...
The Simpson Strong-Tie 2" x 11-7/8" MIT2.1/11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...
The Simpson Strong-Tie 2" x 11-7/8" MIT2.1/11.88 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL26SS Type 316L Stainless Steel Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will...
The Simpson Strong-Tie SUL26SS Type 316L Stainless Steel Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Stainless Steel provides additional corrosion protection when required. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside...
Save by Purchasing a Quantity of 12 Boxes (1200 Pieces)! Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain...
Save by Purchasing a Quantity of 12 Boxes (1200 Pieces)! Simpson Strong Tie U26 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth) Fastener Options: (6) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 1-1/2" 10d Nails (Joist) U26 Information and Installation Instructions....
The Simpson Strong-Tie BA1.81/11.25 Top Flange Hanger is designed for 1-3/4" x 11-1/4" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid...
The Simpson Strong-Tie BA1.81/11.25 Top Flange Hanger is designed for 1-3/4" x 11-1/4" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...
The Simpson Strong-Tie CJT6ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a...
The Simpson Strong-Tie CJT6ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT6ZS short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 12 Glulam Beam - 3-1/8" x 12" PSL - 3-1/2 x...
The Simpson Strong Tie GH48-6 Girder Hangers is used to connect a 4 x 8 girder to a 6" foundation wall using 2x sill plate. 1-1/2 clearance hole can accommodate either rebar or an anchor bolt if...
The Simpson Strong Tie GH48-6 Girder Hangers is used to connect a 4 x 8 girder to a 6" foundation wall using 2x sill plate. 1-1/2 clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 5-5/8" (H) x 6-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH48-6 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...
Simpson Strong Tie HGUS28-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are...
Simpson Strong Tie HGUS28-2 Double Shear Joist Hangers have double-shear nailing and 2-5/8" wide flanges that can accept enough 16d nails to reach the high loads you require. HGUS26-2 hangers are designed to accept two 2 x 8 truss plates or joists with a minimum heel height of 6-9/16". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-5/16" (Wide) x 7-3/16" (Height) x 4" (Seat Depth) Fastener Options: (36) 16d Nails (Header) (12) 16d Nails (Joist)...Shorter Nails Not Allowed...
The Simpson Strong-Tie HU28-2TF is a hybrid 2 x 8-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features...
The Simpson Strong-Tie HU28-2TF is a hybrid 2 x 8-2 double hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 7-1/4" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top...
Simpson Strong Tie face mount HU9 Composite Lumber Hanger is designed for hanging 1-3/4" x 9-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load...
Simpson Strong Tie face mount HU9 Composite Lumber Hanger is designed for hanging 1-3/4" x 9-1/2" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 9-5/16" (Height) x 2-1/2" (Seat Depth) Fastener Options: (18) 16d Nails (Header-Min) (6) 10d Nails (Joist-Min) (24) 16d Nails (Header-Max) (10) 10d Nails (Joist-Max) HU9 Information and Installation Instructions....
Simpson Strong Tie HUC26-2Z ZMax® Double 2 x 6 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use...
Simpson Strong Tie HUC26-2Z ZMax® Double 2 x 6 Reversed Flange Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HUC26-2Z ZMax® hangers include additional triangle holes that can be used to increase load values when required. Reversed flanges allow you to hang hoist flush at corners or any other location where outside flanges will...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong Tie HUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong Tie HUS28 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. HUS28 hangers are also approved for installation with SD10 x 2-1/2" Structural Screws. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions:...
Simpson Strong-Tie ITS1.81/14 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/14 installs 1-3/4" x 14" I-Joists faster and uses less nails than any other EWP top flange...
Simpson Strong-Tie ITS1.81/14 sets a new standard for engineered wood top flange hangers. The ITSITS1.81/14 installs 1-3/4" x 14" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in the joist...
The Simpson Strong-Tie LSSR2.37Z Slopeable and Skewable Rafter Hanger allows you to install a 2-5/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile...
The Simpson Strong-Tie LSSR2.37Z Slopeable and Skewable Rafter Hanger allows you to install a 2-5/16" wide rafter with either a plumb cut or miter cut that has been tacked in place. This versatile hanger is field adjustable for skewing up to 45° either left or right and features an innovative hinged swivel seat to adjust for up to a 45° slope. Material: 16 gauge Finish: ZMax® G-185 Coating Dimensions: 4-1/8" (Flange Width) x 8-15/16" (Height) x 2-3/8" (Joist Width) Fastener...
Simpson Strong-Tie LUC26Z ZMax® 2 x 6/8Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC26Z also provides cleaner lines for exposed conditions such as...
Simpson Strong-Tie LUC26Z ZMax® 2 x 6/8Concealed Flange Joist Hanger are ideal for end of ledger, header or post conditions. The LUC26Z also provides cleaner lines for exposed conditions such as overhead decks. Material: 18 Gauge Finish: G-185 ZMax® Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-3/4" (Seat Depth) Fastener Options: Fastener Options: (6) .162 x 3-1/2" 16d Nails (Header) (4) .148 x 1-1/2" 10d Nails (Joist) Strong Drive® SD9112 #9 x 1-1/2" Structural Screws may be...
Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points...
Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong Tie LUS26 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16"...