Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong Tie LUS24-2 Double 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...
Simpson Strong Tie LUS24-2 Double 2 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS24-2 hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 3-1/8" (Height) x 2" (Seat Depth)...
The Simpson Strong-Tie 1-3/4" x 16" MIT1.81/16 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but...
The Simpson Strong-Tie 1-3/4" x 16" MIT1.81/16 I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...
The Simpson MIU1.81/16 hanger is designed to hang 1-3/4" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/16 features positive-angle...
The Simpson MIU1.81/16 hanger is designed to hang 1-3/4" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...
The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists...
The Simpson Strong-Tie SUL26 Skewed Left 2 x 6/8 joist hangers are skewed 45 degrees left. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside Flange) x 1-5/16" (Inside Flange) Fastener Options : (6) .162" x 3-1/2" 16d Nails (Face) (6) .148" x 1-1/2"...
The Simpson Strong-Tie BA1.81/7.25 Top Flange Hanger is designed for 1-3/4" x 7-1/4" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn...
The Simpson Strong-Tie BA1.81/7.25 Top Flange Hanger is designed for 1-3/4" x 7-1/4" engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. All BA hangers feature minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads. Please Note: BA Hangers may be modified for slopes and/or skews up to 45°. The top...
The Simpson Strong-Tie CJT5ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or...
The Simpson Strong-Tie CJT5ZS is a concealed connector to provide a secure wood to wood connection with no visible hardware. It can be installed three ways: with no routing of header/post or beam; a routed header/post, or a routed beam. The connection must be a 90° joint but may be sloped. The Simpson Strong-Tie CJT5ZS short (2-3/4") pins can be used with 3-1/8" Glulam Beams, 4x sawn lumber or 3-1/2" PSL. Minimum Joist Size: Douglas Fir - 4 x 12 Glulam Beam - 3-1/8" x 10-1/2"...
The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if...
The Simpson Strong Tie GH46-8/3 Girder Hangers is used to connect a 4 x 6 girder to a 8" foundation wall using 3x sill plate. 1-1/2" clearance hole can accommodate either rebar or an anchor bolt if required. Material: 12 gauge Finish: Simpson Strong-Tie Gray Paint: Low Dimensions: 3-9/16" (W) x 2-7/8" (H) x 8-1/16" (S) x 6" (L) Fasteners: (4) 16d Common Nails GH46-8/3 Information and Installation Instructions. Gray Paint Coating Information Simpson Strong-Tie Gray Paint is a water-based paint...
Simpson Strong-Tie HTU210 2 x 10 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU210 hanger very versatile for various...
Simpson Strong-Tie HTU210 2 x 10 Face Mount Hangers are designed so the nails line up with trusses with shallow heel heights as low as 3-7/8". This makes the HTU210 hanger very versatile for various trusses. Additionally you can have the HTU210 skewed up to a 67-1/2° angle. Alternate allowable loads are provided for gaps between the end of the truss and the carrying member up to 1/2" max. to allow for greater construction tolerances (maximum gap for standard allowable loads is 1/8" per...
Simpson Strong Tie HU26-2 Double 2 x 6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on...
Simpson Strong Tie HU26-2 Double 2 x 6 Standard Face Mount Joist Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. HU26-2 hangers include additional triangle holes that can be used to increase load values when required. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener...
Simpson Strong Tie face mount HU7 Composite Lumber Hanger is designed for hanging 1-3/4" x 7-1/4" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load...
Simpson Strong Tie face mount HU7 Composite Lumber Hanger is designed for hanging 1-3/4" x 7-1/4" Microllam® LVL beams. Filling all holes including triangle holes will give you maximum load value. Material: 14 gauge Finish: Standard G90 Galvanized- Dimensions: 1-13/16" (Wide) x 6-11/16" (Height) x 2-1/2" (Seat Depth) Fastener Options: (12) 16d Nails (Header-Min) (4) 10d Nails (Joist-Min) (16) 16d Nails (Header-Max) (8) 10d Nails (Joist-Max) HU7 Information and Installation Instructions....
Simpson Strong Tie HUCQ210-2Z-SDS ZMax® 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2Z-SDS hangers with...
Simpson Strong Tie HUCQ210-2Z-SDS ZMax® 3-1/4" Wide Double 2 x 10 Heavy Duty Joist Hangers come with the required SDS screws to reach the load values you require. HUCQ210-2Z-SDS hangers with concealed flanges are designed to use at the end of a beam or on a post with more width than the beam or joists. Material: 14 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-1/4" (Wide) x 9" (Height) x 3" (Seat Depth) Included Fasteners: (12) SDS 1/4" x 2-1/2" Screws (Header) (6) SDS 1/4" x...
Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top...
Simpson Strong-Tie ITS1.81/11.88 sets a new standard for engineered wood top flange hangers. The ITS1.81/11.88 installs 1-3/4" x 11-7/8" I-Joists faster and uses less nails than any other EWP top flange hanger. The new Strong-Grip seat and Funnel Flange features allow standard joist installation without requiring joist nails resulting in the lowest installed cost. The Strong-Grip seat firmly secures I-joists with flange thicknesses from 1 1/8" to 1 1/2". Installing (4) 10d x 1-1/2" nails in...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy...
Save by Purchasing a Quantity of 30 Boxes (750 Pieces)! Simpson Strong-Tie IUS1.81/14 is used to install 1-3/4" x 14" I-Joist when a top flange hanger in not required. Installation is fast and easy using the Strong-Grip seat and self-jigging locator tabs. Joist nails are not required. Filling the triangle holes in the flange will achieve maximum load values. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 1-7/8" (Wide) x 14" (Height) x 2" (Seat Depth) Fastener Options : (12)...
The Simpson Strong-Tie LSSJ210LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the left. Its simple design...
The Simpson Strong-Tie LSSJ210LZ Field-Adjustable Jack Hanger is the ideal hanger for connecting a 2 x 10 jack rafters to hip/valley members when the rafter skews to the left. Its simple design makes installation intuitive and quick, resulting in lower labor costs. Featuring a versatile, hinged seat, the LSSJ210LZ is easily field-adjustable to typical rafter slopes, with a max slope of 12:12. It ships pre-bent with a 45° skew, making it ready to place for the most typical rafter...
Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger...
Save by Purchasing a Quantity of 36 Boxes (3600 Pieces)! Simpson Strong-Tie LU26 2 x 6 Joist Hangers are an economical and time saving solution to securely installing 2 x 6 joists to a wood ledger or beam. You can install LU26 hangers with 10d ,16d nails or #9 Strong-Drive® screws depending on the load value you are trying to achieve. Material: 20 gauge Finish: Standard G90 Galvanized Dimensions: 1-9/16" (Wide) x 4-3/4" (Height) x 1-1/2" (Seat Depth) Fastener Options: (6) .162 x 3-1/2" 16d...
The Simpson MIU1.81/18 hanger is designed to hang 1-3/4" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/18 features positive-angle...
The Simpson MIU1.81/18 hanger is designed to hang 1-3/4" x 18" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU1.81/18 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...