Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie PAB5-18 5/8" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB5-18 5/8" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
The Simpson PB66Z ZMax® Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coating...
The Simpson PB66Z ZMax® Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. ZMax® Coating Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66Z information and installation instructions ZMax® Galvanized Coating Information ZMax® Coating is a thicker coating (galvanized per ASTM A653 with a G185 coating)...
Save by Purchasing a Quantity of 400 SSTB20L Bolts! The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall...
Save by Purchasing a Quantity of 400 SSTB20L Bolts! The Simpson Strong-Tie SSTB20L (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum...
Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed during the pouring of the concrete. Strap Material: 7...
Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface...
Simpson Strong-Tie EPB66-12 allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus...
Simpson Strong-Tie EPB66-12 allows you to install an elevated 6 x 6 post base from 1" to 2-1/2" above the concrete. This clearance allows the 6 x 6 post to stay above most standing water thus delaying any deterioration that will happen over time. EPB Post Bases do not provide enough resistance to stop a post from rotating so they should not be used in applications with no top connection such as fences and un-braced carports. Finish: Simpson Gray Paint Pipe Size: 1-1/16" OD x 12" Length Base...
Save by Purchasing a Quantity of 8 Boxes (128 Pieces)! The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension...
Save by Purchasing a Quantity of 8 Boxes (128 Pieces)! The Simpson Strong-Tie HTT4 Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard G90 Zinc...
The Simpson Strong-Tie MASB is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with misplaced...
The Simpson Strong-Tie MASB is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with misplaced anchor bolts. The MASB easily installs into wet concrete-grouted CMU block for a time-saving alternative to anchor bolts. Offset design for use in concrete block applications One-piece design, so there are no nuts and washers to lose Unique design eliminates concerns about stud placement 16 gauge...
The Simpson Strong-Tie PAB5-18 5/8" x 18" High Strength Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and...
The Simpson Strong-Tie PAB5-18 5/8" x 18" High Strength Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from high strength steel for higher load values. Please call our sales department direct at 800-323-2999 for pricing and...
The Simpson PB66R Post Base for 6 x 6 (6" x 6") rough lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater...
The Simpson PB66R Post Base for 6 x 6 (6" x 6") rough lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66R information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area...
The S/HDU11 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU11 holdown...
The S/HDU11 Simpson Strong-Tie holdowns are used as Cold Formed Steel framing connectors when structural steel members require a stud-to-foundation or floor to floor connection. The S/HDU11 holdown combines performance with ease of installation using #14 screws self-drilling tapping screws thus saving time and labor.. The pre-deflected geometry virtually eliminates material stretch, resulting in low deflection under load. Foundation Anchor Diameter: 7/8" Fasteners (Not Included): (27) #14...
The Simpson Strong-Tie SSTB20LHDG Hot Dipped Galvanized (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...
The Simpson Strong-Tie SSTB20LHDG Hot Dipped Galvanized (5/8" Diameter by 24-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 24-5/8" Minimum Embedment: 16-5/8" Finish: Hot...
Save by Purchasing a Quantity of 12 Boxes (72 Pieces)! Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed...
Save by Purchasing a Quantity of 12 Boxes (72 Pieces)! Simpson Strong-Tie CB66 column bases are used to provide a connection of a 6 x 6 (5-1/2" x 5-1/2") post to concrete. The CB66 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 5-1/2") Fasteners: (2) 5/8" Machine Bolts CB66 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized...
The Simpson CBSQ86-SDS2 (for 7-1/2" x 5-1/2" post) column bases include (12) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...
The Simpson CBSQ86-SDS2 (for 7-1/2" x 5-1/2" post) column bases include (12) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 8 x 6 Nominal (7-1/2" x 5-3/8") Base: 12 Ga. (7-1/2" x 5-3/8") Strap: 8 Ga. x 3" Wide x 8-11/16" High CBSQ86 Information and Installation...
Simpson Strong-Tie HDU8-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (20) 2-1/2" Simpson...
Simpson Strong-Tie HDU8-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (20) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 7/8" Pre-deflected...
The Simpson Strong-Tie HTT4HDG Hot Dipped Galvanized Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. Hot dipped galvanizing provides added...
The Simpson Strong-Tie HTT4HDG Hot Dipped Galvanized Tension Tie have three fastener options to provide much higher load values than its HTT16 predecessor. Hot dipped galvanizing provides added protection when install hardware to ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT4HDG Tension Ties are designed to be used in both in vertical and horizontal...
The Simpson Strong-Tie MASBZ ZMax® is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with...
The Simpson Strong-Tie MASBZ ZMax® is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with misplaced anchor bolts. The MASB easily installs into wet concrete-grouted CMU block for a time-saving alternative to anchor bolts. Offset design for use in concrete block applications One-piece design, so there are no nuts and washers to lose Unique design eliminates concerns about stud placement 16...