Login/Register
Shopping Cart
OR
Filter
Sort By
Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson...
Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 1" Pre-deflected...
The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of...
The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal applications. Strap Material: 11 Gauge Finish: Standard...
The Simpson Strong-Tie PAB5-24 5/8" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB5-24 5/8" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
The Simpson Strong-Tie SSTB24HDG Hot Dipped Galvanized (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...
The Simpson Strong-Tie SSTB24HDG Hot Dipped Galvanized (5/8" Diameter by 25-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 25-5/8" Minimum Embedment: 20-5/8" Finish: Hot...
Save by Purchasing a Quantity of 12 Boxes (48 Pieces)! Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to...
Save by Purchasing a Quantity of 12 Boxes (48 Pieces)! Simpson Strong-Tie HDU11-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Standard...
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This...
Save by Purchasing a Quantity of 12 Boxes (120 Pieces)! The Simpson Strong-Tie HTT5-3/4 Tension Tie have three fastener options to provide much higher load values than its HTT20 predecessor. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Use this tie when you are using a 3/4" diameter anchor. HTT5-3/4 Tension Ties are designed to be used in both in vertical and horizontal...
The Simpson Strong-Tie MAB15 mudsill anchor features design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB15 can...
The Simpson Strong-Tie MAB15 mudsill anchor features design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB15 can eliminate certain problems associated with misplaced anchor bolts. The MAB15 can be installed for 2x4,6,8,10 or 12 mudsills. Suitable for stem wall, concrete block or slab foundations One-piece design, so there are no nuts and washers to lose A easily installed alternative to standard anchor bolts 18 gauge...
The Simpson Strong-Tie PAB5-24-HDG 5/8" x 24" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems...
The Simpson Strong-Tie PAB5-24-HDG 5/8" x 24" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department...
The Simpson Strong-Tie SSTB24L (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to...
The Simpson Strong-Tie SSTB24L (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 28-1/8" Minimum Embedment: 20-5/8" Finish: None Rolled threads for higher...
Simpson Strong-Tie CB610 column bases are used to provide a connection of a 6 x 10 (5-1/2" x 9-1/2") post to concrete. The CB610 base is installed during the pouring of the concrete. Strap Material:...
Simpson Strong-Tie CB610 column bases are used to provide a connection of a 6 x 10 (5-1/2" x 9-1/2") post to concrete. The CB610 base is installed during the pouring of the concrete. Strap Material: 7 Ga. x 3" Wide Galvanized Steel Base Material: 7 Ga Galvanized (5-1/2" x 9-1/2") Fasteners: (2) 5/8" Machine Bolts CB610 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of...
Simpson Strong-Tie HDU11-SDS2.5HDG Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come...
Simpson Strong-Tie HDU11-SDS2.5HDG Hot Dipped Galvanized Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (30) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 10 Gauge Steel Finish: Hot Dipped Galvanized Anchor Bolt...
The Simpson Strong-Tie HTT5KT Tension Tie Kit includes (1) HTT5 Tension Tie, (1) BP58-2 Bearing Plate and (26) SD #10 x 2-1/2" Screws. This tension tie may be installed up to 18" above the top of...
The Simpson Strong-Tie HTT5KT Tension Tie Kit includes (1) HTT5 Tension Tie, (1) BP58-2 Bearing Plate and (26) SD #10 x 2-1/2" Screws. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. HTT5 Tension Ties are designed to be used in both in vertical and horizontal applications. Using this kit will provide maximum tension load when required. Strap Material: 11 Gauge HTT5 Finish:...
The Simpson Strong-Tie MAB15Z ZMax® mudsill anchor features design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB15...
The Simpson Strong-Tie MAB15Z ZMax® mudsill anchor features design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB15 can eliminate certain problems associated with misplaced anchor bolts. The MAB15Z can be installed for 2x4,6,8,10 or 12 mudsills. Suitable for stem wall, concrete block or slab foundations One-piece design, so there are no nuts and washers to lose A easily installed alternative to standard anchor...
The Simpson Strong-Tie PAB5-30 5/8" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features...
The Simpson Strong-Tie PAB5-30 5/8" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...
Save by Purchasing a Quantity of 300 SSTB24L Bolts! The Simpson Strong-Tie SSTB24L (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall...
Save by Purchasing a Quantity of 300 SSTB24L Bolts! The Simpson Strong-Tie SSTB24L (5/8" Diameter by 28-1/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 28-1/8" Minimum...
The Simpson Strong-Tie HTT5HDG Hot Dipped Galvanized Tension Tie has added protection for use in areas where corrosion maycause problems like ACQ lumber. This tension tie may be installed up to 18"...
The Simpson Strong-Tie HTT5HDG Hot Dipped Galvanized Tension Tie has added protection for use in areas where corrosion maycause problems like ACQ lumber. This tension tie may be installed up to 18" above the top of the concrete with no load reduction provided that additional elongation of the anchor rod is accounted for. Using a BP58-2 bearing plate installed in the seat of the HTT5 provides add more allowable tension load to the connection. HTT5 Tension Ties are designed to be used in both in...