Simpson Strong-Tie

The Simpson Strong-Tie PAB8-18 1" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a...

The Simpson Strong-Tie PAB8-18 1" x 18" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

The Simpson MIU5.12/16 hanger is designed to hang 5" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/16 features positive-angle...

The Simpson MIU5.12/16 hanger is designed to hang 5" x 16" joist in commercial, high-load and double I-joist applications without requiring web stiffeners. The MIU5.12/16 features positive-angle nailing (PAN) which minimizes splitting of the flanges while permitting time-saving nailing from a better angle. This face-mount hanger features speed prongs to temporarily position and secure the connector for easier and faster installation. Material: 16 gauge Finish: Standard G90 Galvanized...

The Simpson Strong-Tie SUR2.06/9 Skewed 45° Right Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...

The Simpson Strong-Tie SUR2.06/9 Skewed 45° Right Hanger can be used when hanging a 2" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 9-1/16" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...

The Simpson Strong-Tie 4-1/8" x 14" MIT4.28/14 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not...

The Simpson Strong-Tie 4-1/8" x 14" MIT4.28/14 Double I-Joist Hanger features Positive Angle Nailing (PAN) that is specifically designed for I-joists. With PAN, the nail hole material is not removed, but is formed to channel and confine the path of the nail at approximately 45°. PAN minimizes splitting of the flanges while permitting time-saving nailing from a better angle. Optional triangle nail holes may be used for increased uplift capacity. Material: 16 gauge Finish: Standard G90...

The Simpson Strong-Tie SUR2.06/11 Skewed 45° Right Hanger can be used when hanging a 2" x 11-7/8" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...

The Simpson Strong-Tie SUR2.06/11 Skewed 45° Right Hanger can be used when hanging a 2" x 11-7/8" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 11-7/8" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/16" (Wide) x 11-1/4" (Height) x 1-5/8" (Outside Flange) x 2-1/8" (Inside Flange) Base:...

The Simpson Strong-Tie PAB8-24 1" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a...

The Simpson Strong-Tie PAB8-24 1" x 24" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

The THDB62800HMG Mechanical Galvanized 5/8" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD...

The THDB62800HMG Mechanical Galvanized 5/8" x 8" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced...

The Simpson Strong-Tie HU614TF is a hybrid 6 x 14 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing...

The Simpson Strong-Tie HU614TF is a hybrid 6 x 14 hanger that incorporates the advantages of both face-mount and top-mount hangers. This heavy-duty, top-flange joist hanger features face-nailing that allows the hanger to be securely attached to the member. The minimum header or ledger size that can be used with this hanger must be 3-1/2". Material: 12 gauge Finish: Standard G90 Galvanized Dimensions: 5-1/2" (Wide) x 13" (Height) x 2-1/2" (Seat Depth) x 2-1/2" (Top Flange) Fasteners: (18) .162...

Simpson Strong-Tie ETB4 Nylon Hole Cleaning Brushes for 3/8" to 7/16" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By...

Simpson Strong-Tie ETB4 Nylon Hole Cleaning Brushes for 3/8" to 7/16" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 8" Brush Length: 3" Hole Diameters: 3/8" to 7/16" Explanation of "Stock" Availability Term Stock items are products we normally have...

Simpson Strong Tie LUS44 4 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...

Simpson Strong Tie LUS44 4 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS44 4 x 4 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 3" (Height) x 2" (Seat Depth) Fastener Options: (4)...

Simpson Strong Tie LUS44Z ZMax® 4 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS44Z ZMax® 4 x 4 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS44Z 4 x 4 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-9/16" (Wide) x 3" (Height) x 2" (Seat Depth) Fastener...

Simpson Strong-Tie ETB6 Nylon Hole Cleaning Brushes for 1/2" to 3/4" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By...

Simpson Strong-Tie ETB6 Nylon Hole Cleaning Brushes for 1/2" to 3/4" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 16" Brush Length: 4" Hole Diameters: 1/2" to 3/4" Explanation of "Stock" Availability Term Stock items are products we normally have...

The Simpson Strong-Tie PAB8-24-HDG 1" x 24" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and...

The Simpson Strong-Tie PAB8-24-HDG 1" x 24" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct...

The Simpson Strong-Tie SUR2.06/14 Skewed 45° Right Hanger can be used when hanging a 2" x 14" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers...

The Simpson Strong-Tie SUR2.06/14 Skewed 45° Right Hanger can be used when hanging a 2" x 14" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2" x 14" engineered wood joist end may be square or beveled cut. Please Note: This hanger can be used for hanging 2" x 16" engineered wood joists with a required web stiffener. Material: 16 gauge Finish: Standard G90 Galvanized...

Simpson Strong Tie HU36 3 x 6 Standard Face Mount Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...

Simpson Strong Tie HU36 3 x 6 Standard Face Mount Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth) Fastener Options: (8) .162 x 3-1/2" (16d) Nails (Header) (4) .148 x 1-1/2" (10d) Nails (Joist) HU36 Information and...

The Simpson Strong-Tie PAB8-30 1" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a...

The Simpson Strong-Tie PAB8-30 1" x 30" Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct at 800-323-2999 for...

Simpson Strong-Tie ETB8 Nylon Hole Cleaning Brushes for 13/16" to 7/8" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By...

Simpson Strong-Tie ETB8 Nylon Hole Cleaning Brushes for 13/16" to 7/8" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 16" Brush Length: 4" Hole Diameters: 13/16" to 7/8" Explanation of "Stock" Availability Term Stock items are products we normally have...

Simpson Strong Tie LUS46 4 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows...

Simpson Strong Tie LUS46 4 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS46 4 x 6/8 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: Standard G90 Galvanized Dimensions: 3-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth) Fastener...

Simpson Strong Tie LUS46Z ZMax® 4 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It...

Simpson Strong Tie LUS46Z ZMax® 4 x 6/8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS46Z 4 x 6/8 Hangers are approved for installation with 16D nails only. Material: 18 gauge Finish: ZMax® G-185 Galvanized Dimensions: 3-9/16" (Wide) x 4-3/4" (Height) x 2" (Seat Depth)...

Simpson Strong-Tie ETB10 Nylon Hole Cleaning Brushes for 1" to 1-1/8" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By...

Simpson Strong-Tie ETB10 Nylon Hole Cleaning Brushes for 1" to 1-1/8" diameter holes are an important part of making sure both epoxy and wedge anchor systems work in the most effective manner. By cleaning the hole after drilling as completely as possible the anchor or epoxy is assured of creating a connection that meets the load requirements. Overall Length: 29" Brush Length: 6" Hole Diameters: 1" to 1-1/8" Explanation of "Stock" Availability Term Stock items are products we normally have...

The Simpson Strong-Tie PAB8-30-HDG 1" x 30" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and...

The Simpson Strong-Tie PAB8-30-HDG 1" x 30" Hot Dipped Galvanized Pre-Assembled anchor bolt is a versatile cast-in-place anchor bolt ideal for high-tension-load applications, such as rod systems and shearwalls. It features a plate washer at the embedded end sandwiched between two fixed hex nuts and a head stamp for easy identification after the pour. This bolt is manufactured from standard steel but is available as a special order in high strength steel. Please call our sales department direct...

The THD75400H 3/4" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...

The THD75400H 3/4" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...

Simpson Strong Tie HUC36 3 x 6 Reversed Flange Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial...

Simpson Strong Tie HUC36 3 x 6 Reversed Flange Beam Hangers are heavy duty connectors with deeper seats than most other standard joist hangers. The hangers are designed for use on commercial properties and schools that require additional safety factors. Reversed flanges allow you to hang joist or beams flush at corners or any other location where outside flanges will not work. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 2-9/16" (Wide) x 5-3/8" (Height) x 2-1/2" (Seat Depth)...

The Simpson Strong-Tie SUL2.1/9 Skewed 45° Left Hanger can be used when hanging a 2-1/16" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These...

The Simpson Strong-Tie SUL2.1/9 Skewed 45° Left Hanger can be used when hanging a 2-1/16" x 9-1/2" engineered wood joist. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2-1/16" x 9-1/2" engineered wood joist end may be square or beveled cut. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 2-1/8" (Wide) x 9-1/16" (Height) x 1-9/16" (Outside Flange) x 2-1/8" (Inside Flange) Base:...