Simpson Strong-Tie

The Simpson Strong-Tie SP1 Stud Plate Tie is designed for sill-to-stud connections to resist uplift. The SP1 stud plate ties features angled holes for a positive connection from the stud to the...

The Simpson Strong-Tie SP1 Stud Plate Tie is designed for sill-to-stud connections to resist uplift. The SP1 stud plate ties features angled holes for a positive connection from the stud to the plates. Features embossments that strengthen the stud-to-plate connection Designed to resist wind and seismic forces Can be used before or after installation including in retrofit applications Material: 20 Gauge Finish: Standard G90 Zinc Fastener: (6) .148 x 3" Nails (Stud) (4) .148 x 3" Nails (Plate)...

Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A...

Save by Purchasing a Pallet of 72 Boxes! The Simpson Strong-Tie H2.5AZ Ties with ZMax® Corrosion Protection can be used as either left or right side ties in the middle of the run. The H2.5A Hurricane Ties connects the double top plate to the rafter or truss. This clip accepts 8d .131" x 1-1/2" joist nails or longer. You can also substitute the Simpson SD #9 x 1-1/2" Structural Screw. Material: 18 Gauge Finish: ZMax® G-185 Coating Fasteners: (10) 8d x 1-1/2" Nails (10) SD9 x 1-1/2"...

The Simpson Strong-Tie RTB22 Rigid Tie® Brackrt is designed for connecting intersecting 2x members in wood construction applications. Manufactured to high-quality standards to ensure solid...

The Simpson Strong-Tie RTB22 Rigid Tie® Brackrt is designed for connecting intersecting 2x members in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this rigid tie features a G90 galvanized finish for added corrosion resistance and requires the use of hot-dip galvanized fasteners. The versatile RTB is ideal for building lattice, railings and shelving. Fastens with Simpson Strong-Tie® Strong-Drive® SD screws (not included)...

Simpson Strong Tie LUS26SS Type 316L Stainless Steel 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for...

Simpson Strong Tie LUS26SS Type 316L Stainless Steel 2 x 6 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. LUS26SS hangers are also approved for installation with SD9 Structural Screws. Material: 18 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 4-3/4" (Height)...

Simpson Strong-Tie Mission Outdoor Accents® APB66R post bases secure a rough 6 x 6 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other...

Simpson Strong-Tie Mission Outdoor Accents® APB66R post bases secure a rough 6 x 6 post or column to concrete and are perfect for outdoor projects such as pergolas, patio covers and other top-supported structures. These post bases feature decorative accents and provide Zmax® galvanization over a black powder coat for extra corrosion resistance. APB66 bases include a 1" standoff from the concrete to help avoid post-end rot caused by moisture. Designed to meet stringent building codes...

The Simpson Strong-Tie SUR26SS Type 316L Stainless Steel Skewed Right 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers...

The Simpson Strong-Tie SUR26SS Type 316L Stainless Steel Skewed Right 2 x 6/8 joist hangers are skewed 45 degrees right. The angles nail slots direct nails for proper installation. These hangers will normally accommodate joists angles between 40-50 degrees. The 2 x 6/8 joist end may be square or beveled cut. Stainless Steel provides additional corrosion protection when required. Material: 16 gauge Finish: Type 316L Stainless Steel Dimensions: 1-9/16" (Wide) x 5" (Height) x 1-1/8" (Outside...

The Simpson Strong-Tie THD37400H6SS Type 316 Stainless Steel 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion...

The Simpson Strong-Tie THD37400H6SS Type 316 Stainless Steel 3/8" x 4" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at...

Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked...

Simpson Strong-Tie SET-3G 22 oz. High-Strength Epoxy Adhesive is the latest innovation in epoxy anchoring adhesives that is formulated to provide superior performance in cracked and uncracked concrete at elevated temperatures. SET-3G installs and performs in a variety of environmental conditions and temperature extremes. The exceptional bond strength of SET-3G results in high design strengths. SET-3G dispenses as a 1:1 ratio in two-component producing a high-strength, epoxy-based anchoring...

Simpson Strong-Tie Outdoor Accents® APST412 Flat Straps bring decorative appeal and with structural strength to any outdoor living space like patio covers, gazebos and more. The APST412 flat...

Simpson Strong-Tie Outdoor Accents® APST412 Flat Straps bring decorative appeal and with structural strength to any outdoor living space like patio covers, gazebos and more. The APST412 flat strap works for 4x lumber in both nominal and rough sizes. It can be used to connect two 4x beams together or add to any project as a decorative accent. These straps are easily installed with Outdoor Accents structural screws and hex-head washers. Install with Outdoor Accents® structural screws and...

The Simpson Strong-Tie TBE6 Truss Bearing Enhancer transfers load from the truss or girder to 2 x 6 wall top plates for bearing-limited conditions and provides exceptional uplift capacity. It...

The Simpson Strong-Tie TBE6 Truss Bearing Enhancer transfers load from the truss or girder to 2 x 6 wall top plates for bearing-limited conditions and provides exceptional uplift capacity. It replaces nail-on scabs that provide lower load transfer, or in some cases, an additional ply when needed for bearing. One size works with any number of girder plies. Must be used in pairs Material: 18 Gauge Finish: Standard G90 Zinc Width: 5-9/16" Fasteners (Rafter): (10) .148 x 1-1/2" Nails (Single Truss...

The Simpson Strong-Tie ML28Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...

The Simpson Strong-Tie ML28Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (10) SDS25112 Screws Dimensions: 8" Length x 2" (Flange Widths) ML28Z Information and...

The Simpson Strong-Tie APVDJT2-6 Avant Outdoor Accents Deck Joist Tie attaches 2x joists to the side of 6x or larger support posts. It installs quickly and easily with the Outdoor Accents structural...

The Simpson Strong-Tie APVDJT2-6 Avant Outdoor Accents Deck Joist Tie attaches 2x joists to the side of 6x or larger support posts. It installs quickly and easily with the Outdoor Accents structural wood screw and hex-head washer for the look of a bolted connection. The Avant Collection features straight edges and chamfered corners for a clean, timeless design. Designed to meet stringent building codes for seismic or high-wind events Install with Outdoor Accents® structural wood screws and...

Simpson Strong-Tie MSTA18Z ZMax® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of...

Simpson Strong-Tie MSTA18Z ZMax® 18 Gauge Straps are one of various strap ties that can transfer tension loads between two wood members. MSTA series straps are designed to be used on the edge of 2x material. The nailing pattern helps reduce the chances of the wood splitting. When using a MSTA strap that requires bending the strap can only be bent one time. Material: 18 gauge Finish: ZMax® G185 Galvanized Dimensions: 1-1/4" (Wide) x 18" (Length) Fasteners: (14) 10d Nails (14) SD9 x...

Head is Painted Tan! The Simpson Strong-Tie 3" x .120" Tan Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from...

Head is Painted Tan! The Simpson Strong-Tie 3" x .120" Tan Ring Shank Type 304 Stainless Steel Coil Nail is the best solution to protect your considerable investment in fine wood siding from hard-to-remove stains and streaks with stainless steel wire coil nails. Chose from four colors or unpainted to match your siding. 1,800 nails per box Head Color - Tan Type 304 stainless steel 15° collated angle Checker pattern on heads blends with wood grain, reduces glare from sunlight and accepts...

The THD37300H 3/8" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor...

The THD37300H 3/8" x 3" Titen HD is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the Titen HD makes it the ideal anchor for structural applications, even at minimum edge distances and under reduced spacing conditions. The proprietary cutting teeth enable the Titen HD to be installed in one eighth of the time when compared to traditional expansion anchors, and at significantly reduced installation torques. The anchor...

Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson...

Simpson Strong-Tie HDU5-SDS2.5 Holdowns are pre-deflected during the manufacturing process, virtually eliminating deflection under load due to material stretch. They come with (14) 2-1/2" Simpson Strong-Tie® Strong-Drive® SDS screws which install easily and provide reduced fastener slip. Using SDS screws results in a greater net section, when compared to bolts, as no material is removed. Material: 14 Gauge Steel Finish: Standard G90 Galvanized Anchor Bolt Diameter: 5/8" Pre-deflected...

The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post...

The Simpson CBSQ66-SDS2 (for 5-1/2" x 5-1/2" post) column bases include (14) 1/4" x 2" SDS screws for faster installation when compared to using machine bolts. The 1" standoff base keeps the post elevated above the concrete reducing the chance of rot from exposure to standing water. Easier Installation Higher Loads Standard G90 Galvanized Column Size: 6 x 6 Nominal (5-1/2" x 5-1/2") Base: 12 Ga. (5-1/2" x 5-1/2") Strap: 10 Ga. x 3" Wide x 8-3/4" High CBSQ66 Information and Installation...

The Simpson Strong-Tie L70Z Reinforcing Angle with ZMax® protection is a 7" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility...

The Simpson Strong-Tie L70Z Reinforcing Angle with ZMax® protection is a 7" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L70Z angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: ZMax® Coating Length: 7" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (8) 10d x 1-1/2" Nails or (8) SD #10 x 1-1/2" Screws...

The Simpson Strong-Tie A35Z ZMax® Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the...

The Simpson Strong-Tie A35Z ZMax® Framing Clips exclusive bending slot allows instant, accurate field bends for all two- and three-way ties. Balanced, completely reversible design permits the A35Z Framing Clips to secure a great variety of wood-to-wood connections including joist-to-plate, studs-to-plate, joist-to-beams and ceiling joists-to beams. ZMax® provides additional corrosion protection when required. Material: 18 Gauge Finish: ZMax® G-185 Coating Length: 4-1/2" Flange...

The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed...

The Simpson PB66 Post Base for 6 x 6 (5-1/2" x 5-1/2") dimensional lumber post is an economical method to connect a post to concrete prior to pouring the concrete. Standard G90 Galvanized Embossed for greater strength Stress relief holes resist tearing Fastener Options: (12) 16d Nails (2) 1/2" Diameter Machine Bolts PB66 information and installation instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of...

The Simpson Strong-Tie SSTB20HDG Hot Dipped Galvanized (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB...

The Simpson Strong-Tie SSTB20HDG Hot Dipped Galvanized (5/8" Diameter by 21-5/8") is designed for maximum performance as an anchor bolt for holdowns and Strong-Wall shearwalls. Extensive SSTB testing has been done to determine the design load capacity at a common application, the garage stem wall. Design loads are based on a series of five tests, with a three-times reduction factor. Minimum Stemwall Width: 6" Bolt Diameter: 5/8" Overall Length: 21-5/8" Minimum Embedment: 16-5/8" Finish: Hot...

Simpson Strong-Tie HL37 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL37 to connect lumber to concrete using an a wedge...

Simpson Strong-Tie HL37 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL37 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is also available as Hot Dipped Galvanized and Powder Coating as a special order.  Additionally, the standard angle and powder coated angles can be special ordered with gussets.  Please call our sales department direct at...

Simpson Strong Tie U26-3 Triple 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements....

Simpson Strong Tie U26-3 Triple 2 x 6/8 Standard Face Mount Joist Hangers can use either 10d or 16d nails in the header allowing you to obtain multiple load values depending on your requirements. Material: 16 gauge Finish: Standard G90 Galvanized Dimensions: 4-5/8" (Wide) x 4-1/4" (Height) x 2" (Seat Depth) Fastener Options: (8) .162" x 3-1/2" 16d Nails (Header) (4) .148" x 3" 10d Nails (Joist) U26-3 Information and Installation Instructions. Standard G90 Zinc Galvanized Coating Information...

Simpson Strong Tie HUS28-2 Double 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also...

Simpson Strong Tie HUS28-2 Double 2 x 8 Double Shear Joist Hangers have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation, and the use of standard nails for all connections. Material: 14 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/8" (Wide) x 7-3/16" (Height) x 2" (Seat Depth) Fastener Options: (6) 16d Nails or SD10212 Screws(Header) (6) 16d Nails...