Login/Register
Shopping Cart
OR
Filter
Sort By
The Simpson Strong-Tie ML24Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood...
The Simpson Strong-Tie ML24Z 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (6) SDS25112 Screws Dimensions: 4" Length x 2" (Flange Widths) ML24Z Information and...
The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy....
The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard G90 Zinc Fasteners-to-blocking: (6)...
The Simpson Strong-Tie RTA2Z ZMax® Rigid Tie® is designed to connect two 2x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for...
The Simpson Strong-Tie RTA2Z ZMax® Rigid Tie® is designed to connect two 2x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a ZMax® galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #9 x 1-1/2" SD Screws (not...
Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily...
Simpson Strong-Tie TA9Z-R Staircase Angles are used for securely providing support for stair treads eliminating the need for labor intensive notching of the stringer. The TA9Z angles are easily installed with (5) SDS25112 (1/4" x 1-1/2") screws or longer. Please Note: SDS screws are not included. Finish: ZMax® coating Material: 12 Gauge Fasteners (Not Included): (Min) SDS25112 Screws - (2) Stringer, (3) Tread (Max) SDS25112 Screws - (3) Stringer, (2) Tread Dimensions: 8-1/4" Length x...
The Simpson Strong-Tie VPA2.1 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/16" wide rafters to the top plate. It will adjust to accommodate...
The Simpson Strong-Tie VPA2.1 Variable Pitch Connector may be sloped in the field, offering a versatile solution for attaching 2-1/16" wide rafters to the top plate. It will adjust to accommodate slopes between 3:12 and 12:12, making it a complement to the versatile LSSR Series Field-Adjustable Jack Hangers. This VPA series connectors eliminate the need for notched rafters, beveled top plates and toe nailing. Material: 18 Gauge Finish: Standard G90 Zinc Width: 2-1/8" Actual Joist Width:...
The Simpson Strong-Tie A24 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 2-1/2" Flange #1 (W1): 3-7/8" Flange...
The Simpson Strong-Tie A24 Framing Clips for various wood to wood connections at a 90° angle. Material: 12 Gauge Finish: Standard G90 Galvanized Length (L): 2-1/2" Flange #1 (W1): 3-7/8" Flange #2 (W2): 2" Fasteners: (2) 1/2" machine Bolts A24 Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides). This coating provides a low level of...
The Simpson Strong-Tie DSC5R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that...
The Simpson Strong-Tie DSC5R-SDS3 Right Drag-Strut Connector transfers the diaphragm shear forces from the girder truss or beam to the shearwalls. It is quickly installed using 3" SDS screws that are included with the connector. The DSC5R-SDS3 drag strut connectors requires 40% less fasteners than the DSC4R connector but gets 12% higher loads. Material: 3 gauge Finish: Simpson Strong-Tie Gray Paint Dimensions: 21" (Length) x 3" (Flanges) Included Fasteners: (24) SDS 1/4" x 3" DSC5R-SDS3...
The Simpson Strong-Tie DSPZ ZMax® Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to...
The Simpson Strong-Tie DSPZ ZMax® Double Stud Plate Tie is a prebent strap designed to connect double studs to either top or bottom plates. This versatile double-stud-plate connector helps to create a continuous load path in uplift resistance. The DSP features a top flange that allows the plate to attach securely to both sill plates and top plates. ZMax® coating provides extra corrosion resistance when used in more corrosive environments. Embossments feature provides strength at the...
The Simpson Strong-Tie H1.81Z ZMax® Hurricane Tie is designed for use with 1 3/4" LVL roof rafters to provide a stronger connection to the top plate of the wall. It's ideal for connections when...
The Simpson Strong-Tie H1.81Z ZMax® Hurricane Tie is designed for use with 1 3/4" LVL roof rafters to provide a stronger connection to the top plate of the wall. It's ideal for connections when there are higher-load demands on the structure, like a heavy snow load, and provides lateral resistance in a seismic event. This 1 3/4"-wide H1.81Z connector is the first hurricane tie to be specifically sized for engineered wood. The H1.81Z installs with half the nails that are needed for two...
Simpson Strong-Tie HL35 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35 to connect lumber to concrete using an a wedge...
Simpson Strong-Tie HL35 Heavy Angles can be used for connecting lumber at a 90° angle using either through bolts or lags. You can also use the HL35 to connect lumber to concrete using an a wedge anchor or Titen Screw Bolt. Please Note: This angle is available with a gusset as a special order. Please call our sales department direct at 800-323-2999 for pricing and lead time. Material: 7 gauge Finish: Standard G90 Galvanized Dimensions: 3-1/4" (W1) x 3-1/4" (W2) x 5" (L) Bolt...
The Simpson Strong-Tie L50Z Reinforcing Angle with ZMax® protection is a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility...
The Simpson Strong-Tie L50Z Reinforcing Angle with ZMax® protection is a 5" long framing clip used to create 90° wood to wood connections. The staggered nail pattern reduces the possibility of splitting the wood. The flanges are 2-3/8" and 1-3/8" wide. The L50 angles can use 10d x 1-1/2" joist nail or #10 X 1-1/2" SD Structural Screws. Material: 16 Gauge Finish: ZMax® Coating Length: 5" Flange Widths: 1-3/8" x 2-3/8" Fasteners: (6) 10d x 1-1/2" Nails or (6) SD #10 x 1-1/2" Screws...
The Simpson Strong-Tie Type 316L Stainless Steel LS50SS Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips...
The Simpson Strong-Tie Type 316L Stainless Steel LS50SS Skewable Reinforcing Angles are field adjustable from 0° to 135°. These clips come standard with a 45° bend. The LS Skewable clips can only be bent one time. Flanges are 2-1/4" wide. LS50SS Angles can use 10d .148" x 1-1/2" or longer nails depending on the application. The type 316L Stainless Steel allows you to use the LS50SS angles in highly corrosive environments. Material: 18 Gauge Finish: Type 316L Stainless Steel Length:...
The Simpson Strong-Tie ML24SS Stainless Steel 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to...
The Simpson Strong-Tie ML24SS Stainless Steel 12 Gauge angle combines strength and versatility through the use of Strong-Drive SDS25112 Heavy-Duty Connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. Please Note: SDS screws are not included. Finish: Type 316L Stainless Steel Material: 12 Gauge Fasteners (Not Included): (6) SDS25112 Screws Dimensions: 4" Length x 2" (Flange Widths)...
Save by Purchasing 36 Box Special! The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make...
Save by Purchasing 36 Box Special! The Simpson Strong-Tie RBC roof boundary clip is designed to aid installation and transfer shear loads between the roof diaphragm and wall. The locator tabs make proper location of the clip easy. The RBC can be used on wood or masonry walls and will handle roof pitches from 0/12 to 12/12. The RBC is available as a special order with prongs into one side (RBCP) for pre-attachment of the part to a block at the truss plant. Material: 20 Gauge Finish: Standard...
The Simpson Strong-Tie RTA4 Rigid Tie® is designed to connect two 4x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle...
The Simpson Strong-Tie RTA4 Rigid Tie® is designed to connect two 4x posts and joists at a 90° angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance. Ideal for gates, fences or any project where a 90® connection is needed Fastens with #8 x 1-1/4" SD Screws (not included) Provides a strong...
The Simpson Strong-Tie STCT Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. Use STCT clips where truss and rafter are separated from the top plate of the...
The Simpson Strong-Tie STCT Roof Truss Clips are used for alignment control between a roof truss and nonbearing walls. Use STCT clips where truss and rafter are separated from the top plate of the non-bearing wall. Material: 18 Gauge Finish: Standard G90 Zinc Fasteners: (3) 8d Nails STCT Information and Installation Instructions Standard G90 Zinc Galvanized Coating Information Standard G90 Zinc Galvanized Coating contains 0.90 oz. of zinc per square foot of surface area (total both sides)....